
Servo Drive Final
DoggeBoi/Servo_PCBs
Collection of proof of consept and "production" PCBs

Collection of proof of consept and "production" PCBs
Servo Test Board v4 is an open-source printed circuit board by DoggeBoi, from the DoggeBoi/Servo_PCBs repository on GitHub, published under the MIT licence. It is a 4-layer board of 85 × 55 mm with 115 parts on 110 nets, routed with 527 tracks and 153 vias.
It is built around the MCP2551-I/SN-HG, IR2104PBF and AS5048A, with the LSM6DSO, FDS8984 and PMEG3010BEA among its other parts. Its parts include 34 capacitors, 30 resistors, 8 diodes, 7 ICs and 2 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Collection of proof of consept and "production" PCBs
Test PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6, JP7, JP10, JP11, JP12, JP14, JP15, JP16, JP17, JP18, JP19, JP20 +2 |
| 14 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C9, C12, C13, C15, C16, C26, C28, C29, C30, C31 |
| 12 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C14, C20, C21, C22, C23, C24, C27, C32, C33, C34, C35 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R12, R14, R15, R17, R18, R25, R26 |
| 4 | 10 | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R24 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 22 | Resistor_SMD:R_0402_1005Metric | R28, R29, R30 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 20 | Resistor_SMD:R_0402_1005Metric | R10, R20 |
| 2 | 24 | Resistor_SMD:R_0402_1005Metric | R4, R9 |
| 2 | 47 | Resistor_SMD:R_0402_1005Metric | R3, R8 |
| 2 | 560p | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | FDS8984 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 2 | IR2104 | IR2104STRPBF:SOIC127P600X175-8N | U6, U7 |
| 2 | LED Blue | LED_SMD:LED_0603_1608Metric | D4, D7 |
| 2 | LED Green | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | PMEG3010BEA | Diode_SMD:D_SOD-323 | D5, D6 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 12n | Capacitor_SMD:C_0402_1005Metric | C25 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 4k7 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 50k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 820 | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | AS5048A | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | CAN Termination | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Header 4p | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | LED Yellow | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSM6DSO | LSM6DSO:LGA14L | U3 |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Motor_A_Lead | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | Motor_B_Lead | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | NANOSMDC150F | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | PCM12SMTR | PCM12SMTR:PCM12SMTR | S1 |
| 1 | RTT20R062FTE | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R16 |
| 1 | STM32F303CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWO connector | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J1 |
| 1 | TL1963A-33DCYR | TL1963A-33DCYR:VREG_TL1963A-33DCYR | U5 |
| 1 | Thermistor_A | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | Thermistor_B | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | X322516MLB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |

DoggeBoi/Servo_PCBs
Collection of proof of consept and "production" PCBs




hon13071184d/STM-Temp-Logger
A hardware and firmware design for temperature data logger using STM32



DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

It measures 85 × 55 mm and has 4 copper layers, 1.6 mm thick.
115 parts, built around the MCP2551-I/SN-HG, IR2104PBF, AS5048A and LSM6DSO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DoggeBoi/Servo_PCBs repository on GitHub, at the commit this page was made from: the board is Servo_Test_Board_v4/Servo_Test_Board_v4.kicad_pcb and its schematic Servo_Drive_Final/Servo_Drive_Final.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).