Skip to the content
2 layers50.8 × 101.6 mmPerfboard, the printed circuit board in 3D

A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

Size
50.8 × 101.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
39
Pads
200
Tracks, vias
38, 1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Mar 2021
Updated
18 Jul 2022

Overview

Perfboard is an open-source printed circuit board by Windfisch, from the Windfisch/midikraken repository on GitHub. It is a 2-layer board of 50.8 × 101.6 mm with 49 parts on 39 nets, routed with 38 tracks and 1 via.

Its parts include 24 resistors, 8 diodes, 8 connectors, 4 capacitors and 4 ICs. It belongs with the audio and music and interfaces and adapters boards of this library.

README

README.md

Midikraken

build doc-links binary_size

An open-source, open-hardware MIDI-USB-interface supporting up to 16 (and maybe beyond?) MIDI ports. The hardware is based on a STM32F103 "blue pill" board which can be cheaply sourced from your favourite chinese seller (note about quality differences), plus other garden variety components such as HC2630 opto couplers (that's just two 6N137 in one package), shift registers, some LEDs and resistors.

Apart from being a MIDI-USB-interface, Midikraken is a feature-packed MIDI router supporting separate clock and note event routing, clock division. Future features may include split-keyboard routing, clock generation or even a hardware arpeggiator.

Example of a Midikraken configuration

Below you will find a technical overview. A user manual is available here.

Releases

Find the latest firmware upgrade packages on the releases page. You only need an USB cable, instructions for Linux and Windows are included.

The schematics and board layout files are on a separate page. Hardware and firmware are versioned separately, their numbers do not match.

Hardware

Midikraken consists of two different PCBs that can be stacked (almost) arbitrarily: The DIN board has four traditional MIDI in/out port pairs, and can house the master microcontroller.

The TRS board gives you eight TRS MIDI pairs that support both TRS-A and TRS-B. (Inputs are automatic, outputs need to be configured in software). It can not house the microcontroller and thus cannot be used without a DIN board.

The boards can be chained using their master/slave connectors and are stackable using M3 screws / spacers. Currently, the firmware must be adapted and recompiled according to the stack configuration. Currently, a maximum of 16 port pairs is supported.

For information on the hardware, the revision history and errata, see the hardware documentation. A build guide for rev01 and rev02 is available.

Firmware

The firmware is written in Rust and is released under the GPLv3 license.

Since the STM32F103 only offers 3 hardware UARTs, we need to emulate the UART protocol in software. For this, a timer interrupt oversamples the UART input pins with thrice the baudrate in order to always read a stable bit at a non-edge. (Guaranteed 1/3 * bit time distance from any edge, so the signal should be quite stable until then.)

Benchmarks show that this can be done fast enough for up to 16 software UARTs (and likely even more), while leaving plenty of cpu cycles (25% for 16 UARTs) free for other work.

Further information about the firmware itself can be found in the firmware documentation.

License

The software in the firmware directory can be redistributed and/or modified under the terms of the GNU General Public License Version 3. Note this does not apply to the bootloader which is under its own license.

The hardware designs in the hardware directory, excluding hardware/lib/3d to which own conditions apply, can be licensed under the terms of the CERN OHL Version 2 license. This specifically includes (but is not limited to) schematics, PCB designs and gerber files.

Contributing

I am happy about contributions, just open a pull request!

Note: Even though Midikraken is licensed under GPLv3 and OHL-S-v2 (the exact versions), any contributions / pull requests must be licensed under the "GPLv3 or any later version" or "OHL-S-v2 or any later version", respectively. This is because on the one hand, I want to be able to update the project to new versions of these licenses, but on the other hand, I don't like licensing my work under a license (e.g. the hypothetical GPLv4) that I haven't even read yet. If such a license is released, I will likely adopt it after revising it.

Parts

49
QtyValueFootprintReferences
8100Resistor_SMD:R_0805_2012MetricR3, R5, R9, R11, R15, R17, R21, R23
8DIN-5footprints:DIN5J1, J2, J3, J4, J5, J6, J7, J8
8LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8
410Resistor_SMD:R_0805_2012MetricR6, R12, R18, R24
4100nCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4
410kResistor_SMD:R_0805_2012MetricR4, R10, R16, R22
4220Resistor_SMD:R_0805_2012MetricR1, R7, R13, R19
447Resistor_SMD:R_0805_2012MetricR2, R8, R14, R20
46N137Package_DIP:DIP-8_W7.62mmU1, U2, U3, U4
1BluePillfootprints:BLUEPILLA1

More from Windfisch/midikraken

2
  • 2 layers56 × 110 mmTrs pcb, the printed circuit board in 3D

    Trs pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    125 parts28
  • 2 layers56 × 110 mmDin5 pcb, the printed circuit board in 3D

    Din5 pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    82 parts28

Similar boards

  • 2 layers173 × 122.5 mmCapBank, the printed circuit board in 3D

    CapBank

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    49 parts915
  • 2 layers85.1 × 49.8 mmAvrcraft m644, the printed circuit board in 3D

    Avrcraft m644

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    49 parts471
  • 2 layers50 × 90 mmMouse, the printed circuit board in 3D

    Mouse

    biomurph/Mouse

    Repository for Open Source Mouse Firmware and Hardware

    49 parts362MIT
  • 2 layers126.4 × 15.2 mmV5probe, the printed circuit board in 3D

    V5probe

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    49 parts332
  • 2 layers43 × 92.3 mmDSKY driver, the printed circuit board in 3D

    DSKY driver

    benkrasnow/DSKY_EL_replica

    Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

    49 parts261MIT
  • 2 layers58 × 110 mmUtils output ui, the printed circuit board in 3D

    Utils output ui

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    49 parts222
  • 2 layers61 × 42.5 mmShutter, the printed circuit board in 3D

    Shutter

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    49 parts208
  • 2 layers31 × 38 mmEmbedded, the printed circuit board in 3D

    Embedded

    blakesmith/embedded

    Blake's embedded projects

    49 parts167

Questions

How big is the Perfboard PCB?

It measures 50.8 × 101.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Perfboard use?

49 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Perfboard KiCad files?

From the Windfisch/midikraken repository on GitHub, at the commit this page was made from: the board is hardware/perfboard/perfboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Perfboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Windfisch before reusing the design.