

Delta sigma demodulator
Scratchpad for embedded projects
- Size
- 79.4 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 32
- Pads
- 153
- Tracks, vias
- 236, 22
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Oct 2025
- Updated
- 14 Aug 2026
Overview
Delta sigma demodulator is an open-source printed circuit board by williamyang98, from the williamyang98/embedded_scratchpad repository on GitHub. It is a 2-layer board of 79.4 × 59.7 mm with 52 parts on 32 nets, routed with 236 tracks and 22 vias.
It is built around the LM324. Its parts include 17 resistors, 13 capacitors, 13 connectors and 3 ICs.
Main components
1README
kicad_delta_sigma_demodulator/README.mdIntroduction
Demodulates digital delta sigma serial signal into original analog signal using:
- LM319 comparators to clean up digital delta sigma 1bit signal
- LM324 op amps to create a multi-stage active low pass filter
It is the receiver board for the delta sigma modulator transmitter board in kicad_delta_sigma_modulator.

Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C6, C8 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R16 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R7, R8 |
| 2 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C9, C10 |
| 2 | 20k | Potentiometer_THT:Potentiometer_ACP_CA9-H5_Horizontal | RV1, RV2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C5 |
| 1 | 19.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 21k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 3.3n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C12 |
| 1 | 330p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C11 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C13 |
| 1 | 5.4k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 680p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 7.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | LM317L_TO92 | Package_TO_SOT_THT:TO-92_Inline | U1 |
| 1 | LM319 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U2 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U3 |
| 1 | LPF JMP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | M1+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12 |
| 1 | M1- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | M2+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | M2- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | REG EN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | S1+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | S1- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | S2+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | S2- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | VCC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
More from williamyang98/embedded_scratchpad
2- 2 layers62.2 × 88.3 mm

- 2 layers82.5 × 76.8 mm

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm

Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm

- 2 layers231.1 × 106.7 mm

- 4 layers82.6 × 82.6 mm

- 4 layers72.4 × 95.3 mm

DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm

Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0 - 4 layers292.1 × 88.3 mm

Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69
Questions
How big is the Delta sigma demodulator PCB?
It measures 79.4 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Delta sigma demodulator use?
52 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Delta sigma demodulator KiCad files?
From the williamyang98/embedded_scratchpad repository on GitHub, at the commit this page was made from: the board is kicad_delta_sigma_demodulator/delta_sigma_demodulator.kicad_pcb and its schematic kicad_delta_sigma_demodulator/delta_sigma_demodulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Delta sigma demodulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask williamyang98 before reusing the design.