

Word clock
A small 100mm x 100mm clock made from layers of PCBs
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 259
- Nets
- 132
- Pads
- 831
- Tracks, vias
- 1,215, 171
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2019
- Updated
- 11 May 2021
Overview
Word clock is an open-source printed circuit board by williamweatherholtz, from the williamweatherholtz/word_clock repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 259 parts on 132 nets, routed with 1,215 tracks and 171 vias.
It is built around the LN6206P332MR-G, WS2812B-MINI-X2 and BSS138, with the CR2032-BS-6-1 among its other parts. Its parts include 127 capacitors, 114 diodes, 6 switches, 2 ICs and 2 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
4LN6206P332MR-G
SOT-23-3L-40℃~+85℃@(Ta) 1 240mV@(50mA) 250mA 2uA 3.3V 40dB@(1kHz) 6V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNATLINEARVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B-MINI-X2
SMD3535-4P0.6mA 0.95mm 2kHz 3.5V~5.3V 3.5mm 3.5mm 800Kbit/s B:215mcd、R:330mcd、G:700mcd R:620nm~625nm、B:467nm~472nm、G:515nm~520nm 内置上电复位电路、内置掉电复位电路、集成智能反向连接保护功能 SMD3535-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsCR2032-BS-6-1
-Battery base CR2032 Phosphor bronze - ROHSQ&JButton And Strip Battery Connector
Parts
259| Qty | Value | Footprint | References |
|---|---|---|---|
| 122 | 100N | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +106 |
| 114 | WS2812B-MINI | william_led:WS2812B_v3-MINI | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +98 |
| 6 | SW_SPST | william_switch:KAN4562-0501C | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 4U7 | Capacitor_SMD:C_0402_1005Metric | C4, C115, C119 |
| 2 | 21P | Capacitor_SMD:C_0402_1005Metric | C123, C124 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CR2032-BS-6-1 | william_batteries:CR2032-BS-6-1 | BT1 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | LN6206P332MR-G | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | STM32F401CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0 | william_usb:C168688 | J1 |
Similar boards
- 2 layers100 × 100 mm

- 4 layers44 × 33.5 mm

Telinksensor hw
WojtaCZ/telinksensor-hw
HW repository for TLSR8258 based temperature, humidity and pressure sensor
79 parts2 - 4 layers40 × 60 mm

TMDT1UC1
GrimGT/Meridian
Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots
35 parts1 - 4 layers63.3 × 89.1 mm

HCF Badge
NullByteZero/HCF2025-badge
A repo with both hardware and software files for HCF CTF badge 2025.
16 parts1 - 4 layers150.6 × 89.9 mm

AdvDash 5 inch
ADVecu/ADV.dash
ADV.dash is a dashboard project built with LVGL and ESP32-S3. It is prepared to receive CAN bus data from rusEFI and, in the future, other programmable ECUs.
190 parts - 2 layers63 × 90 mm

- 4 layers79.9 × 84.7 mm

- 2 layers51.8 × 18 mm

Esp now portable sender
CommanderRedYT/esp-now-portable-sender
A small PCB with a ESP-32 and a button cell to send ESP-Now messages
8 partsGPL-3.0
Questions
How big is the Word clock PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Word clock use?
259 parts, built around the LN6206P332MR-G, WS2812B-MINI-X2, BSS138 and CR2032-BS-6-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Word clock KiCad files?
From the williamweatherholtz/word_clock repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Word clock design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).