Skip to the content
2 layers100 × 100 mmWord clock, the printed circuit board in 3D

A small 100mm x 100mm clock made from layers of PCBs

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
259
Nets
132
Pads
831
Tracks, vias
1,215, 171
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
9 Dec 2019
Updated
11 May 2021

Overview

Word clock is an open-source printed circuit board by williamweatherholtz, from the williamweatherholtz/word_clock repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 259 parts on 132 nets, routed with 1,215 tracks and 171 vias.

It is built around the LN6206P332MR-G, WS2812B-MINI-X2 and BSS138, with the CR2032-BS-6-1 among its other parts. Its parts include 127 capacitors, 114 diodes, 6 switches, 2 ICs and 2 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

4

Parts

259
QtyValueFootprintReferences
122100NCapacitor_SMD:C_0402_1005MetricC1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +106
114WS2812B-MINIwilliam_led:WS2812B_v3-MINID1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +98
6SW_SPSTwilliam_switch:KAN4562-0501CSW1, SW2, SW3, SW4, SW5, SW6
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
34U7Capacitor_SMD:C_0402_1005MetricC4, C115, C119
221PCapacitor_SMD:C_0402_1005MetricC123, C124
110KResistor_SMD:R_0402_1005MetricR1
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1CR2032-BS-6-1william_batteries:CR2032-BS-6-1BT1
1CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1LN6206P332MR-GPackage_TO_SOT_SMD:SOT-23U1
1STM32F401CBUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU2
1SWDConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1USB_C_Receptacle_USB2.0william_usb:C168688J1

Similar boards

  • 2 layers100 × 100 mmEnvcity aqm v2, the printed circuit board in 3D

    Envcity aqm v2

    MateusMaruzka/aqm_envcity_hw

    138 parts2
  • 4 layers44 × 33.5 mmTelinksensor hw, the printed circuit board in 3D

    Telinksensor hw

    WojtaCZ/telinksensor-hw

    HW repository for TLSR8258 based temperature, humidity and pressure sensor

    79 parts2
  • 4 layers40 × 60 mmTMDT1UC1, the printed circuit board in 3D

    TMDT1UC1

    GrimGT/Meridian

    Tagged ranging and coordinate position system for FRC events. Using UWB ranging with anchors and tags to provide realtime positioning of robots

    35 parts1
  • 4 layers63.3 × 89.1 mmHCF Badge, the printed circuit board in 3D

    HCF Badge

    NullByteZero/HCF2025-badge

    A repo with both hardware and software files for HCF CTF badge 2025.

    16 parts1
  • 4 layers150.6 × 89.9 mmAdvDash 5 inch, the printed circuit board in 3D

    AdvDash 5 inch

    ADVecu/ADV.dash

    ADV.dash is a dashboard project built with LVGL and ESP32-S3. It is prepared to receive CAN bus data from rusEFI and, in the future, other programmable ECUs.

    190 parts
  • 2 layers63 × 90 mmFallout Badge, the printed circuit board in 3D

    Fallout Badge

    AethelVeritas/Isochron

    A metronome PCB badge for Hackclub's Fallout.

    16 partsMIT
  • 4 layers79.9 × 84.7 mmUTS PCB Dewi, the printed circuit board in 3D

    UTS PCB Dewi

    astarsD130/UTS-matkul-pcb

    55 parts
  • 2 layers51.8 × 18 mmEsp now portable sender, the printed circuit board in 3D

    Esp now portable sender

    CommanderRedYT/esp-now-portable-sender

    A small PCB with a ESP-32 and a button cell to send ESP-Now messages

    8 partsGPL-3.0

Questions

How big is the Word clock PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Word clock use?

259 parts, built around the LN6206P332MR-G, WS2812B-MINI-X2, BSS138 and CR2032-BS-6-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Word clock KiCad files?

From the williamweatherholtz/word_clock repository on GitHub, at the commit this page was made from: the board is main/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Word clock design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).