

Lsm6dsoxCANEnabled
- Size
- 49.4 × 47.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 50
- Pads
- 183
- Tracks, vias
- 367, 67
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Sep 2023
- Updated
- 2 Nov 2026
Overview
Lsm6dsoxCANEnabled is an open-source printed circuit board by WilliamLim781, from the WilliamLim781/PCB_practice repository on GitHub. It is a 4-layer board of 49.4 × 47.9 mm with 38 parts on 50 nets, routed with 367 tracks and 67 vias.
It is built around the TJA1051T and AMS1117-3.3. Its parts include 14 capacitors, 5 resistors, 5 connectors, 4 ICs and 2 switches. It belongs with the STM32 boards of this library.
Main components
2TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPCB_practice
just a bunch of PCB practice. That's it
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C7, C8, C9, C11, C13, C14 |
| 4 | MountingHole | MountingHole:MountingHole_4mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5 |
| 2 | 14p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 16mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BOOT0 | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW2 |
| 1 | CANH and CANL input n output | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J5 |
| 1 | GPIO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Nrst | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | Power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J4 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Termination Resistor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | ~ | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
More from WilliamLim781/PCB_practice
12- 4 layers91.8 × 94.5 mm

- 4 layers91.8 × 94.5 mm

- 4 layers153 × 114.3 mm

- 6 layers50 × 50 mm

- 6 layers50 × 50 mm

- 2 layers100 × 123.8 mm

- 4 layers49.9 × 49.8 mm

- 4 layers88.9 × 69.1 mm

- 4 layers48.3 × 40.8 mm

- 2 layers45 × 36 mm

- 2 layers100.3 × 100 mm

- 4 layers87.6 × 73.7 mm

Similar boards
- 2 layers150 × 50 mm

- 2 layers176.9 × 164 mm

HabitatCAN Dev Board (ESP32) - Panel
FireLabsCA/HabitatCAN-Dev-Board-ESP32
HabitatCAN development board with ESP32 microprocessor
436 parts2CC-BY-SA-4.0 - 2 layers50 × 70 mm

- 2 layers64.3 × 88.3 mm

- 2 layers42.5 × 50.5 mm

Pcan
DaphindicksDJ12/industrial-usb-can-interface
Industrial USB-to-CAN interface PCB with CAN bus protection, USB connectivity, power regulation, and robust automotive communication hardware.
28 parts - 2 layers71 × 60 mm

Control
kramerbastian/doppeltraktion
doppeltraktion is the world‘s simplest model railway throttle.
28 parts - 4 layers65 × 65 mm

- 2 layers123 × 87.3 mm

Questions
How big is the Lsm6dsoxCANEnabled PCB?
It measures 49.4 × 47.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Lsm6dsoxCANEnabled use?
38 parts, built around the TJA1051T and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lsm6dsoxCANEnabled KiCad files?
From the WilliamLim781/PCB_practice repository on GitHub, at the commit this page was made from: the board is lsm6dsoxCANEnabled/lsm6dsoxCANEnabled.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lsm6dsoxCANEnabled design in my own project?
Its repository states no licence, so its author keeps all rights: ask WilliamLim781 before reusing the design.