Skip to the content
6 layers50 × 50 mmESC IR2104, the printed circuit board in 3D
Size
50 × 50 mm
Copper layers
6
Thickness
1.6 mm
Parts
67
Nets
79
Pads
349
Tracks, vias
547, 181
Pours
14
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Sep 2023
Updated
2 Nov 2026

Overview

ESC IR2104 is an open-source printed circuit board by WilliamLim781, from the WilliamLim781/PCB_practice repository on GitHub. It is a 6-layer board of 50 × 50 mm with 67 parts on 79 nets, routed with 547 tracks and 181 vias.

It is built around the IR2104PBF, AMS1117 and BSC028N06LS3 G. Its parts include 22 capacitors, 18 resistors, 8 ICs, 6 transistors and 4 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

3

README

README.md

PCB_practice

just a bunch of PCB practice. That's it

Parts

67
QtyValueFootprintReferences
6100Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R5, R9, R10, R14, R15
6100nCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC2, C3, C4, C5, C6, C7
6BSC028N06LS3Package_TO_SOT_SMD:TDSON-8-1Q1, Q2, Q3, Q4, Q5, Q6
44u7Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C16, C19, C22
3100kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR6, R11, R16
3100n 50VCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC14, C17, C20
322KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR8, R13, R18
32mResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR7, R12, R17
3DDiode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolderD1, D2, D3
3INA180A1Package_TO_SOT_SMD:SOT-23-5U4, U6, U8
3IR2104Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mmU3, U5, U7
2.027u 50vCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC18, C21
28pCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9, C10
2LOGOLOGOG***, G***
1.27u 50vCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC15
110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12
111kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
116Mhz?Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC8
122uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC13
14.7uCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC1
1AMS1117Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Boot0Button_Switch_SMD:SW_SPDT_PCM12SW2
1Conn_01x02_SocketConnector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_HorizontalJ4
1Conn_01x03Connector_AMASS:AMASS_MR30PW-FB_1x03_P3.50mm_HorizontalJ3
1Current limiterResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1NRSTButton_Switch_SMD:SW_SPST_PTS647_Sx38SW1
1STM32F411RETxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1inputConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1potPotentiometer_THT:Potentiometer_Alps_RK09K_Single_HorizontalRV1
1swdConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1

More from WilliamLim781/PCB_practice

12
  • 4 layers91.8 × 94.5 mmPCB practice, the printed circuit board in 3D

    PCB practice

    WilliamLim781/PCB_practice

    122 parts1
  • 4 layers91.8 × 94.5 mmPCB practice, the printed circuit board in 3D

    PCB practice

    WilliamLim781/PCB_practice

    120 parts1
  • 4 layers153 × 114.3 mmStm32f429z, the printed circuit board in 3D

    Stm32f429z

    WilliamLim781/PCB_practice

    85 parts1
  • 6 layers50 × 50 mmESC, the printed circuit board in 3D

    ESC

    WilliamLim781/PCB_practice

    69 parts1
  • 2 layers100 × 123.8 mmKeyboard, the printed circuit board in 3D

    Keyboard

    WilliamLim781/PCB_practice

    61 parts1
  • 4 layers49.9 × 49.8 mmPCB practice, the printed circuit board in 3D

    PCB practice

    WilliamLim781/PCB_practice

    51 parts1
  • 4 layers88.9 × 69.1 mmSTM32F030, the printed circuit board in 3D

    STM32F030

    WilliamLim781/PCB_practice

    48 parts1
  • 4 layers48.3 × 40.8 mmTuner, the printed circuit board in 3D

    Tuner

    WilliamLim781/PCB_practice

    46 parts1
  • 2 layers100.3 × 100 mmDistortion, the printed circuit board in 3D

    Distortion

    WilliamLim781/PCB_practice

    40 parts1
  • 4 layers87.6 × 73.7 mmStm32f405rgt6, the printed circuit board in 3D

    Stm32f405rgt6

    WilliamLim781/PCB_practice

    40 parts1

Similar boards

  • 2 layers75.7 × 75.7 mmPcb motor driver, the printed circuit board in 3D

    Pcb motor driver

    sabanekko3/PCBM_drive-board

    PCBステータモーター用のドライバ基板(kicad7)

    99 parts3
  • 2 layers100 × 100 mmHotBox, the printed circuit board in 3D

    HotBox

    sundr007/HotBox

    A benchtop thermal Chamber used to test electronics at elevated ambient temperature. Kicad PCB, STM32 firmware, OpenScad Mechanical

    43 parts1GPL-2.0
  • 4 layers84 × 66 mmSpinner, the printed circuit board in 3D

    Spinner

    enkhbold470/spinner

    12-24 V FOC BLDC motor controller: STM32G431, three IR2104 half bridges with 60 V MOSFETs, MT6701 encoder, CAN FD. 4-layer KiCad 10 board.

    87 partsCERN-OHL-S-2.0
  • 4 layers73 × 98 mmALBERT FLIGHTCOMPUTER, the printed circuit board in 3D

    ALBERT FLIGHTCOMPUTER

    felixznr/ALBERT

    Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.

    161 partsMIT
  • 4 layers46 × 93.7 mmBaSe PWR V3 3, the printed circuit board in 3D

    BaSe PWR V3 3

    M-Welsch/base-pcb-power

    Backup Server Circuit Board that contains power management and sbu

    110 parts
  • 2 layersPufferfish Power-1, the printed circuit board in 3D

    Pufferfish Power-1

    pez-globo/pufferfish-electronics

    Circuit schematics and PCB layouts for the Pufferfish ventilator.

    9 parts3
  • 2 layersBOOSTV2, the printed circuit board in 3D

    BOOSTV2

    zhaque3/DC-DC-Boost-Converter

    A repository consisting of the PCB Design and firmware for DC-DC Boost converter on the University of Alberta EcoCar vehicle.

    77 parts

Questions

How big is the ESC IR2104 PCB?

It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.

What parts does the ESC IR2104 use?

67 parts, built around the IR2104PBF, AMS1117 and BSC028N06LS3 G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESC IR2104 KiCad files?

From the WilliamLim781/PCB_practice repository on GitHub, at the commit this page was made from: the board is ESC_IR2104/ESC_IR2104.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESC IR2104 design in my own project?

Its repository states no licence, so its author keeps all rights: ask WilliamLim781 before reusing the design.