

CAN IMU
- Size
- 49.5 × 49.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 50
- Pads
- 124
- Tracks, vias
- 212, 28
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Sep 2023
- Updated
- 2 Nov 2026
Overview
CAN IMU is an open-source printed circuit board by WilliamLim781, from the WilliamLim781/PCB_practice repository on GitHub. It is a 4-layer board of 49.5 × 49.5 mm with 29 parts on 50 nets, routed with 212 tracks and 28 vias.
It is built around the TJA1051T and AMS1117-3.3. Its parts include 14 capacitors, 4 connectors, 3 ICs, 2 switches and 1 resistor. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2TJA1051T
SOIC-8-40℃~+150℃ 2.5mA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdPCB_practice
just a bunch of PCB practice. That's it
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9, C11 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_Pad | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C12, C14 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C13 |
| 2 | 6p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 8Mhz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering | x1 |
| 1 | ADC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CAN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | GPIO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | STM32F103C4Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J4 |
More from WilliamLim781/PCB_practice
12- 4 layers91.8 × 94.5 mm

- 4 layers91.8 × 94.5 mm

- 4 layers153 × 114.3 mm

- 6 layers50 × 50 mm

- 6 layers50 × 50 mm

- 2 layers100 × 123.8 mm

- 4 layers49.9 × 49.8 mm

- 4 layers88.9 × 69.1 mm

- 4 layers48.3 × 40.8 mm

- 2 layers45 × 36 mm

- 2 layers100.3 × 100 mm

- 4 layers87.6 × 73.7 mm

Similar boards
- 2 layers150 × 50 mm

- 2 layers176.9 × 164 mm

HabitatCAN Dev Board (ESP32) - Panel
FireLabsCA/HabitatCAN-Dev-Board-ESP32
HabitatCAN development board with ESP32 microprocessor
436 parts2CC-BY-SA-4.0 - 2 layers50 × 70 mm

- 2 layers64.3 × 88.3 mm

- 2 layers42.5 × 50.5 mm

Pcan
DaphindicksDJ12/industrial-usb-can-interface
Industrial USB-to-CAN interface PCB with CAN bus protection, USB connectivity, power regulation, and robust automotive communication hardware.
28 parts - 2 layers71 × 60 mm

Control
kramerbastian/doppeltraktion
doppeltraktion is the world‘s simplest model railway throttle.
28 parts - 4 layers65 × 65 mm

- 2 layers123 × 87.3 mm

Questions
How big is the CAN IMU PCB?
It measures 49.5 × 49.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CAN IMU use?
29 parts, built around the TJA1051T and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAN IMU KiCad files?
From the WilliamLim781/PCB_practice repository on GitHub, at the commit this page was made from: the board is CAN IMU/CAN IMU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAN IMU design in my own project?
Its repository states no licence, so its author keeps all rights: ask WilliamLim781 before reusing the design.