2 layers
2 layers
Mems 17mm
wetdog/mems-microsICS-43432 mems breakout circular board
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 7
- Pads
- 19
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Feb 2020
- Updated
- 26 Feb 2020
Overview
Mems 17mm is an open-source printed circuit board by wetdog, from the wetdog/mems-micros repository on GitHub, published under the MIT licence. It is a 2-layer board with 10 parts on 7 nets.
It is built around the ICS-43432. Its parts include 7 connectors, 1 capacitor and 1 resistor.
Main components
1README
README.mdmems-micros
ICS-43432 mems breakout circular board
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm | J1, J2, J3, J4, J5, J6, J7 |
| 1 | 0.1uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 100k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | ICS-43432 | ICS-43432:MIC_ICS-43432 | MK1 |
More from wetdog/mems-micros
1Similar boards
- 2 layers76.1 × 87.9 mm
- 2 layers45 × 100 mm
Walkiepcb
houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
93 parts1 - 4 layers86.4 × 50.8 mm
LoRa device
indoor-industry/Mercurio-RevB
A project for a functioning handheld LoRa+GPS radio device
168 partsGPL-3.0 - 2 layers280 × 110 mm
PCB Piano v1.1
ninjatill/PCB-Capacitive-Touch-Synth
A Raspberry Pi-based synthesizer with capacitive touch keys directly on a PCB.
284 parts - 4 layers85.6 × 54 mm
Sound spectrum v1
path321/sound_spectrum_mcu
STM32-powered board to analyze sound from MEMS microphone
40 partsMIT - 4 layers
LumiCtrl
saeedniko/LumiCtrl
Hardware and firmware design for controlling LED strips using an ESP32 microcontroller. Includes circuit design, PCB layout, and software for lighting effects and control.
138 partsGPL-3.0 - 2 layers140 × 80 mm
- 2 layers155.9 × 27 mm
GlowBand
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
68 parts4MIT
Questions
What parts does the Mems 17mm use?
10 parts, built around the ICS-43432. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mems 17mm KiCad files?
From the wetdog/mems-micros repository on GitHub, at the commit this page was made from: the board is mems_tdk/mems_17mm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mems 17mm design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).