
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

WM RB HAT is an open-source printed circuit board by Weird-loopealab, from the Weird-loopealab/weird-audio-hat-hw repository on GitHub. It is a 2-layer board of 65 × 40.5 mm with 80 parts on 80 nets, routed with 671 tracks and 118 vias.
It is built around the BC817. Its parts include 28 capacitors, 24 resistors, 5 connectors, 2 ICs and 1 transistor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | pf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C20, C21, C29, C30, C33, C34 |
| 6 | 47uF 35V 1206 | ArduinoModules:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C13, C14, C15, C16, C17 |
| 5 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R26 |
| 5 | 220-1k | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2, FB3, FB6, FB7 |
| 5 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C8, C31, C32 |
| 4 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R30, R31 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R28, R29 |
| 4 | 1u Film P5-7.5mm W<6mm | ArduinoModules:C_Rect_Film_L7.2mm_W5.5mm_P5.00mm_7.5mm_Combo_FKS2_FKP2_MKS2_MKP2 | C18, C19, C37, C38 |
| 4 | 3mm_Mounting_Hole | ArduinoModules:MountingHole_3.2mm_M3_Keepout | H1, H2, H5, H6 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R22, R23 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R15, R24 |
| 3 | 22-68uF Bipolar 25-35V | ArduinoModules:CP_Radial_D8.0mm_P2.50-3.5mm_100uF_Mejores_Pads | CP1, CP2, CP4 |
| 3 | Fiducial | ArduinoModules:Fiducial_1mm_Mask2mm | FM1, FM2, FM3 |
| 2 | 10-47u 1206 >10V | ArduinoModules:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22, C35 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 10 1206 | ArduinoModules:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 100-470uF 6.3V | ArduinoModules:CP_Radial_D8.0mm_P2.50-3.5mm_100uF_Mejores_Pads | CP3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 1u Film P5mm W<6mm | Capacitor_THT:C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C36 |
| 1 | 22n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 2x20 Pins | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | BC817 | ArduinoModules:SOT-23_Mefores_Pads | Q1 |
| 1 | LOGO | project_footprints:weird_logo_3 | G*** |
| 1 | LOGO | project_footprints:weirdText2 | G*** |
| 1 | Line | ArduinoModules:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | Line L | ArduinoModules:Jack_3.5mm_Combo_CUI_SJ1-3525N_Horizontal | J7 |
| 1 | Line R | ArduinoModules:Jack_3.5mm_Combo_CUI_SJ1-3525N_Horizontal | J1 |
| 1 | MCP1711T-33 /OT | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U4 |
| 1 | Mic Bias | ArduinoModules:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Output Mono | ArduinoModules:Jack_3.5mm_Combo_CUI_SJ1-3525N_Horizontal | J5 |
| 1 | Output Stereo | ArduinoModules:Jack_3.5mm_Combo_CUI_SJ1-3525N_Horizontal | J2 |
| 1 | WM8960 | ArduinoModules:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_Handsolder | U1 |

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino


BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.



It measures 65 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
80 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Weird-loopealab/weird-audio-hat-hw repository on GitHub, at the commit this page was made from: the board is WM_RB-HAT.kicad_pcb and its schematic WM_RB-HAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Weird-loopealab before reusing the design.