
FSAE board 2
wazzu-racing/Racing_HUD
ECU - Arduino CAN comuunicaiton Display for important run time info I/O Availible for DATAAC to use

ECU - Arduino CAN comuunicaiton Display for important run time info I/O Availible for DATAAC to use
WsuWD V3 DSM is an open-source printed circuit board by wazzu-racing, from the wazzu-racing/Racing_HUD repository on GitHub. It is a 2-layer board of 73.7 × 101.6 mm with 18 parts on 55 nets, routed with 110 tracks and 9 vias.
It is built around the ATMEGA644A-PU and MCP2515-I. Its parts include 4 capacitors, 4 connectors, 3 ICs, 2 resistors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Files for the Wazzu Racing Heads up display
Features:
ECU - Arduino CAN comuunicaiton Display for important run time info I/O Availible for DATA_AC to use
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 7Seg con | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical | J1 |
| 1 | ACO-20MHz-A | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | ATmega644A-P | Package_DIP:DIP-40_W15.24mm | U3 |
| 1 | CAN BOB | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |
| 1 | Conn_02x02_Odd_Even | Connector_PinSocket_2.00mm:PinSocket_2x02_P2.00mm_Vertical | J2 |
| 1 | LD1086DT50TR | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | MCP2515 | Package_DIP:DIP-18_W7.62mm_Socket | U5 |
| 1 | USB UART BOB | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J4 |
The 14 most common of 18 parts.

wazzu-racing/Racing_HUD
ECU - Arduino CAN comuunicaiton Display for important run time info I/O Availible for DATAAC to use

recursive-embedded-DEV/Robot_auto_balanceur_CUT2026
Ce répertoire présente les différentes étape de conception matérielle et logicielle d'un robot biroue auto-balanceur créé dans le cadre d'un projet étudiant en 2026 à l'École de Technologie Supérieure (ÉTS).


mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.


Edgeberry/Edgeberry-HWCartridge-ConsoleCAN
An Edgeberry Hardware Cartridge with a CAN-bus interface and USB console access

sharst/metaldetector-shield
Hardware and Software for a custom build metaldetector + pressure sensing shield


It measures 73.7 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ATMEGA644A-PU and MCP2515-I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wazzu-racing/Racing_HUD repository on GitHub, at the commit this page was made from: the board is circuitDiagrams_kiCadFiles/wsuWD_V3_DSM.kicad_pcb and its schematic circuitDiagrams_kiCadFiles/WSUPCB_CC/FSAE board 2/FSAE board 2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wazzu-racing before reusing the design.