

Data logger wsu racing v0.3.kicad pro
Data Acquisition data logger PCB KiCad files (kiCad 6.0)
- Size
- 78.5 × 101.9 mm
- Copper layers
- 2
- Thickness
- 2.45 mm
- Parts
- 41
- Nets
- 87
- Pads
- 216
- Tracks, vias
- 338, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Feb 2022
- Updated
- 1 Apr 2022
Overview
Data logger wsu racing v0.3.kicad pro is an open-source printed circuit board by wazzu-racing, from the wazzu-racing/data_logger_pcb repository on GitHub. It is a 2-layer board of 78.5 × 101.9 mm with 41 parts on 87 nets, routed with 338 tracks and 0 vias.
It is built around the MCP2562-H/P, TEENSY 4.1 and LM2592HVT-5.0. Its parts include 18 resistors, 7 capacitors, 4 ICs, 3 diodes and 2 connectors. It belongs with the sensors and measurement boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedLM2592HVT-5.0
TO-220-5-40℃~+125℃@(TJ) 1 127kHz~173kHz 2A 2mA 5V 60V Buck Buck Built-in TO-220-5 DC-DC Converters ROHSHGSEMIDC-DC Converters
README
README.mddata_logger_pcb
Data Acquisition data logger PCB KiCad files (kiCad 6.0)
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | .257in | teensy_holder:MountingHole_0.257_in_Pad_Via | H1, H2, H3, H4, H5 |
| 3 | .1u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C4, C7 |
| 2 | 30v 2A | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 1 | .01u | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C8 |
| 1 | 10u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 1 | 120R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 220u | Capacitor_THT:CP_Axial_L30.0mm_D10.0mm_P35.00mm_Horizontal | C3 |
| 1 | 33u | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1 |
| 1 | 47v | teensy_holder:V10P30P | RV1 |
| 1 | 680u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | ADXL362_BOB | teensy_holder:adxl362BOB_footprint | U2 |
| 1 | DB15_Female_MountingHoles | Connector_Dsub:DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | LM2592HV | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | MCP2562 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | R0_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | R0_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | R1_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | R1_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | R2_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | R2_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | R3_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | R3_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | R4_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | R4_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | R5_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | R5_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | R6_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
| 1 | R6_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | R7_a | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | R7_b | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | Teensy4.1 | teensy_holder:Teensy41 | U4 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J2 |
Similar boards
- 2 layers

- 4 layers40 × 40 mm

CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 4 layers108 × 54 mm

MCU Powertrain
mark-belbin/motor-controller
Custom FOC motor controller designed for underwater robotics.
163 parts43GPL-3.0 - 2 layers86.4 × 54.6 mm

- 4 layers100 × 54 mm

- 2 layers

- 2 layers160 × 100 mm

Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause - 2 layers100 × 50 mm

Questions
How big is the Data logger wsu racing v0.3.kicad pro PCB?
It measures 78.5 × 101.9 mm and has 2 copper layers, 2.45 mm thick.
What parts does the Data logger wsu racing v0.3.kicad pro use?
41 parts, built around the MCP2562-H/P, TEENSY 4.1 and LM2592HVT-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Data logger wsu racing v0.3.kicad pro KiCad files?
From the wazzu-racing/data_logger_pcb repository on GitHub, at the commit this page was made from: the board is data_logger_wsu_racing_v0.3.kicad_pro.kicad_pcb and its schematic data_logger_wsu_racing_v0.3.kicad_pro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Data logger wsu racing v0.3.kicad pro design in my own project?
Its repository states no licence, so its author keeps all rights: ask wazzu-racing before reusing the design.