2 layers100 × 100 mm
4 layers40 × 40 mm
OpenWave
wattnotions/OpenWave8Open Source Ocean Wave Sensor
- Size
- 40 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 87
- Pads
- 246
- Tracks, vias
- 400, 28
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Feb 2019
- Updated
- 22 Nov 2023
Overview
OpenWave is an open-source printed circuit board by wattnotions, from the wattnotions/OpenWave repository on GitHub. It is a 4-layer board of 40 × 40 mm with 51 parts on 87 nets, routed with 400 tracks and 28 vias.
It is built around the STM32F405RGT6, MAX3232ID and BNO055, with the MIC5209-4.2YS, MIC5239-3.3YS and TL3315NF160Q among its other parts. Its parts include 25 capacitors, 11 resistors, 5 ICs, 4 connectors and 3 crystals. It belongs with the STM32 boards of this library.
Main components
6
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
MIC5209-4.2YS
SOT-223-3-40℃~+125℃ 1 16V 170uA 4.2V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMIC5239-3.3YS
SOT-223-3-40℃~+125℃ 1 160uVrms 3.3V 30V 350mV@(500mA) 45uA 500mA Fixed Over Voltage Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TL3315NF160Q
SMD-4P,4.5x4.5mm-20℃~+70℃ 0.55mm 1.6N 12V 4.5mm 4.5mm 500,000 Cycles 50mA Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket Yellow SMD-4P,4.5x4.5mm Tactile Switches ROHSE-SwitchTactile Switches
README
README.mdOpenWave
Open Source Ocean Wave Sensor
For latest updates on where this project is at, visit http://www.wattnotions.com/category/openwave/
Copyright 2019
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C8, C9, C10, C11, C15, C18 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C23, C24, C25, C26 |
| 4 | 12p | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C13, C14, C16, C17 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12 |
| 2 | 12pf | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 15R | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | TL3315NF160Q | digikey-footprints:Switch_Tactile_SMD_4.5x4.5mm_TL3315NF160Q | S1, S2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22pf | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 32.768KHz | my_footprints:ABS06-32.768KHZ_smd_crystal | Y2 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 503182-1852 | 503182-1852:MOLEX_503182-1852 | J2 |
| 1 | 8MHz | my_footprints:QC5CA8_8mhz_oscillator | Y1 |
| 1 | BNO055 | BNO055:LGA28R50P4X10_380X520X100 | U3 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Crystal | my_footprints:ABS06-32.768KHZ_smd_crystal | Y3 |
| 1 | D_Schottky | Diode_SMD:D_0201_0603Metric | D1 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | MIC5209-4.2 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MIC5239-3.3YS | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | STM32F405RGT | pyboard:LQFP64 | IC1 |
| 1 | Screw_Terminal_01x04 | my_footprints:4-WAY-PCB_SOCKET | J3 |
| 1 | USB_OTG | my_footprints:wurth_usb_connector | J1 |
Questions
How big is the OpenWave PCB?
It measures 40 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the OpenWave use?
51 parts, built around the STM32F405RGT6, MAX3232ID, BNO055 and MIC5209-4.2YS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenWave KiCad files?
From the wattnotions/OpenWave repository on GitHub, at the commit this page was made from: the board is OLD/openwave-kicad/OpenWave.kicad_pcb and its schematic OLD/openwave-kicad/BNO055sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenWave design in my own project?
Its repository states no licence, so its author keeps all rights: ask wattnotions before reusing the design.
Similar boards
- 4 layers96.6 × 40.7 mm
- 2 layers70 × 80 mm
- 4 layers203.2 × 100.1 mm
- 2 layers100 × 60 mm
- 2 layers26 × 45 mm
Freesk8-Robogotchi v1.5
FreeSK8/FreeSK8-Robogotchi-Hardware
Hardware repository for FreeSK8 Robogotchi
32 parts19 - 2 layers83 × 71 mm
- 2 layers76.2 × 113 mm
