
Sensor interface 1.1.0
WATonomous/interfacing-mono
repo for all firmware, ROS nodes, messages, and schematics to live

repo for all firmware, ROS nodes, messages, and schematics to live
Gateway r0 is an open-source printed circuit board by WATonomous, from the WATonomous/interfacing-mono repository on GitHub. It is a 2-layer board of 68.7 × 53.5 mm with 60 parts on 65 nets, routed with 523 tracks and 87 vias.
It is built around the MCP2551-I/P and MCP2515-I. Its parts include 22 resistors, 9 capacitors, 7 diodes, 6 ICs and 4 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | R0402 | R2, R3, R9, R16, R17, R18, R19, R20, R21, R22 |
| 7 | 1k | R0402 | R4, R5, R6, R7, R10, R11, R12 |
| 4 | .1u | C0402 | C1, C2, C6, C9 |
| 4 | 22p | C0402 | C4, C5, C7, C8 |
| 3 | TP_4545 | TP1, TP2, TP3 | |
| 3 | CON23.5MM | PHOENIX_2_45 | CON1, CON2, CON3 |
| 3 | Green | LED0603 | D2, D3, D6 |
| 2 | JP1 | JP6, JP7 | |
| 2 | 120 | R0402 | R13, R15 |
| 2 | 16MHz | HC49UP | X1, X2 |
| 2 | 47k | R0402 | R1, R14 |
| 2 | Blue | LED0603 | D5, D8 |
| 2 | MCP2515 | SOIC18 | U2, U5 |
| 2 | MCP2551 | SOIC8-6.0 | U1, U3 |
| 2 | Red | LED0603 | D4, D7 |
| 1 | .3 | R0402 | R8 |
| 1 | 33u | CP1206 | C3 |
| 1 | 74241PW | PW_R-PDSO-G20 | U6 |
| 1 | ARDUINO_JP1 | ARDUINO_JP1 | JP1 |
| 1 | ARDUINO_JP2 | ARDUINO_JP2 | JP2 |
| 1 | ARDUINO_JP3 | ARDUINO_JP3 | JP3 |
| 1 | ARDUINO_JP5 | ARDUINO_JP5 | JP5 |
| 1 | CON8 | PH-8-SM | CON4 |
| 1 | LOGO | LOGO | G*** |
| 1 | TL750M | TO-263 | U4 |

WATonomous/interfacing-mono
repo for all firmware, ROS nodes, messages, and schematics to live


sharst/metaldetector-shield
Hardware and Software for a custom build metaldetector + pressure sensing shield





knoerk/MicroGasExchange
Software, Circuits and PCB for microcontroller based gas exchange system

It measures 68.7 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the MCP2551-I/P and MCP2515-I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WATonomous/interfacing-mono repository on GitHub, at the commit this page was made from: the board is DBW-boards/gateway/gateway_r0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WATonomous before reusing the design.