2 layers105.4 × 67.6 mm
2 layers31.8 × 54.6 mm
Rpi can
jnod/rpi_can- Size
- 31.8 × 54.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 37
- Pads
- 89
- Tracks, vias
- 68, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Jan 2016
- Updated
- 22 Feb 2016
Overview
Rpi can is an open-source printed circuit board by jnod, from the jnod/rpi_can repository on GitHub. It is a 2-layer board of 31.8 × 54.6 mm with 12 parts on 37 nets, routed with 68 tracks and 4 vias.
It is built around the MCP2551-I/P and MCP2515-I. Its parts include 4 resistors, 3 ICs, 2 capacitors, 2 connectors and 1 crystal.
Main components
2README
README.mdrbpi_can
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22p | Capacitors_SMD:C_1206_HandSoldering | C1, C2 |
| 1 | 10MHZ | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 120 | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | 18k | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | CONN | Pin_Headers:Pin_Header_Straight_1x06 | P1 |
| 1 | MCP2515 | Housings_DIP:DIP-18_W7.62mm | U3 |
| 1 | MCP2551 | Housings_DIP:DIP-8_W7.62mm | U2 |
| 1 | OKI-78SR | footprints:OKI-78SR | U1 |
| 1 | RBPI_HEADER | Pin_Headers:Pin_Header_Straight_2x20 | P2 |
Similar boards
- 2 layers140 × 90 mm
Metaldetector
sharst/metaldetector-shield
Hardware and Software for a custom build metaldetector + pressure sensing shield
149 parts4LGPL-3.0 - 2 layers68.7 × 53.5 mm
Sensor interface 1.1.0
WATonomous/interfacing-mono
repo for all firmware, ROS nodes, messages, and schematics to live
61 parts1 - 2 layers97 × 58 mm
- 2 layers100 × 51 mm
- 2 layers70 × 55 mm
- 2 layers
ControlBoard
knoerk/MicroGasExchange
Software, Circuits and PCB for microcontroller based gas exchange system
106 partsGPL-3.0 - 2 layers121.6 × 62.4 mm
Questions
How big is the Rpi can PCB?
It measures 31.8 × 54.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi can use?
12 parts, built around the MCP2551-I/P and MCP2515-I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi can KiCad files?
From the jnod/rpi_can repository on GitHub, at the commit this page was made from: the board is rpi_can.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi can design in my own project?
Its repository states no licence, so its author keeps all rights: ask jnod before reusing the design.