

- Size
- 95.8 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 54
- Pads
- 191
- Tracks, vias
- 485, 57
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Feb 2026
- Updated
- 18 Aug 2026
Overview
FMRadio is an open-source printed circuit board by WaseemALTamer, from the WaseemALTamer/EmbeddedControlSystem repository on GitHub. It is a 2-layer board of 95.8 × 97 mm with 56 parts on 54 nets, routed with 485 tracks and 57 vias.
It is built around the HTU21D, TDA2822M/TR and HC-SR04, with the PCF8563 among its other parts. Its parts include 8 capacitors, 7 ICs, 5 switches and 4 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4HTU21D
DFN-6-EP(3x3)-40℃~+125℃ 0%RH~100%RH 1.5V~3.6V 450uA 8bit、12bit、14bit Factory calibration、Built-in temperature and humidity compensation、Built-in heater、Derived quantity calculation I2C ±0.3℃ ±2%RH DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSTE ConnectivityTemperature And Humidity SensorTDA2822M/TR
SOP-80℃~+70℃ 1.8V~12V 2-Channel 30dB、40dB 380mW×2@8Ω、1300mW×2@8Ω、650mW×2@4Ω 6mA Automatic mute/no-noise switch、Built-in audio processing SOP-8 Audio Amplifiers ROHSHGSEMIAudio AmplifiersHC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, TransmittersPCF8563
SOP-8-20℃~+85℃ 0.25uA 1.8V~5.5V I2C Programmable clock output、Alarm function、Countdown timer Yes SOP-8 Real Time Clocks ROHSIDCHIPReal Time Clocks
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | TestPoint_Small | Library:PinHeader_1x04_P2.54mm_Vertical_Custum_shortedpins | 3.3V1, 5V1, A0, A1, A2, A3, A4, A5, A6, A7, D0, D1, D10, D11, D12, D13 +10 |
| 4 | 100μF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C5, C6 |
| 3 | ~ | Library:PinHeader_1x04_P2.54mm_Vertical_Custum_shortedpins | GOUT1, LOUT1, ROUT1 |
| 2 | 100nF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7, C8 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 10μF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3, C4 |
| 2 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 1 | 0-50K | Potentiometer_THT:Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | AN1 |
| 1 | ENTER | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW3 |
| 1 | HC-SR04 | Library:XCVR_HC-SR04 | U2 |
| 1 | HTU21D | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U5 |
| 1 | KY-022 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U3 |
| 1 | KY-040 | Library:KY-040-PORT | U1 |
| 1 | LEFT | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | PCF8563 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U4 |
| 1 | POWER_SWITCH | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | POWER_SWITCH_AUDIO | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW5 |
| 1 | RIGHT | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW4 |
| 1 | Si4703 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | U6 |
| 1 | TDA2822M | Library:DIP762W45P254L1092H508Q8 | U7 |
| 1 | WC1602A | Display:WC1602A | DS1 |
More from WaseemALTamer/EmbeddedControlSystem
1- 2 layers100 × 100 mm

Similar boards
- 4 layers100 × 80 mm

- 2 layers191.5 × 139.5 mm

- 4 layers81 × 114 mm

Phonev6
kmatzen/millennium
I took an old pay phone from the 2000's and replaced the brains with a raspberry pi and some arduinos.
64 partsMIT - 2 layers50 × 19.5 mm

SolarAmp
clwe/SolarSoundBoards
A small collection of PCBs for DIY manufacturing on the CNC machine.
15 parts - 2 layers84.8 × 136 mm

- 2 layers

Vhf uhf IQ Modulator
antonjan/IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
88 parts7GPL-3.0 - 2 layers65.5 × 57.2 mm

Espclock3
victor-chew/espclock3
Internet-enabled Analog Clock using ESP8266 and ATtiny85
26 parts3Apache-2.0 - 2 layers63.5 × 31.8 mm

Questions
How big is the FMRadio PCB?
It measures 95.8 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FMRadio use?
56 parts, built around the HTU21D, TDA2822M/TR, HC-SR04 and PCF8563. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FMRadio KiCad files?
From the WaseemALTamer/EmbeddedControlSystem repository on GitHub, at the commit this page was made from: the board is PCB/Version-2/FMRadio.kicad_pcb and its schematic PCB/Version-1/Encoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FMRadio design in my own project?
Its repository states no licence, so its author keeps all rights: ask WaseemALTamer before reusing the design.