2 layers49.4 × 35.8 mm
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT
2 layers
Networked lights rev2
W-A-James/NetworkedLightsCode for microcontroller lives in microcontroller/NetworkedLights
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 40
- Pads
- 56
- Tracks, vias
- 37, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Oct 2023
- Updated
- 11 Feb 2025
Overview
Networked lights rev2 is an open-source printed circuit board by W-A-James, from the W-A-James/NetworkedLights repository on GitHub, published under the MIT licence. It is a 2-layer board with 8 parts on 40 nets, routed with 37 tracks and 0 vias.
It is built around the SN74AHCT125N. Its parts include 2 resistors, 2 connectors, 1 capacitor, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdNetworkedLights
Code for Control web-app lives in app/
KiCad project lives in schematics/networked_lights
Code for microcontroller lives in microcontroller/NetworkedLights
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 250 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Adafruit_Feather_HUZZAH32_ESP32 | Module:Adafruit_Feather | A1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x03_Male | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | Power LED | LED_THT:LED_D5.0mm | D1 |
| 1 | SN74AHCT125N | Package_DIP:DIP-14_W7.62mm | U1 |
Questions
What parts does the Networked lights rev2 use?
8 parts, built around the SN74AHCT125N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Networked lights rev2 KiCad files?
From the W-A-James/NetworkedLights repository on GitHub, at the commit this page was made from: the board is schematic/networked_lights/networked_lights_rev2.kicad_pcb and its schematic schematic/networked_lights/light_string.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Networked lights rev2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40 × 108 mm
- 2 layers26.9 × 73.9 mm
WS2812ControllerEthernet
klein0r/pcb-ws2812-ethernet-controller
Ethernet Controller for WS2812 LED Stripes
12 parts38MIT - 2 layers49.5 × 35.6 mm
WLED Controller
f2daz/WLED_PCB_D1_Mini
PCB for WLED with WeMos D1 Mini and SN74AHCT125N level shifter
12 parts34MIT - 2 layers65 × 70 mm
Openradfan
andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output
49 parts29MIT - 2 layers
Foxie clock nano
afoxinsocks/foxie-clock
A Nixie-like, retro, RGB LED, Arduino-powered clock
133 parts24GPL-3.0 - 2 layers120 × 90 mm
- 2 layers276.9 × 142.2 mm
