Skip to the content
2 layers112 × 98 mmSourccey pcb, the printed circuit board in 3D

Open Source Electrical Repository for Sourccey

Size
112 × 98 mm
Copper layers
2
Thickness
1.6 mm
Parts
163
Nets
138
Pads
577
Tracks, vias
1,321, 120
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Jul 2026
Updated
10 Jul 2026

Overview

Sourccey pcb is an open-source printed circuit board by vulcan-forge, from the vulcan-forge/sourccey-electrical repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 112 × 98 mm with 163 parts on 138 nets, routed with 1,321 tracks and 120 vias.

It is built around the MCP3008-I/P, BQ34Z100PWR-R2 and TCA9517D, with the TPS7A1633DGNR and IRLZ44N among its other parts. Its parts include 57 capacitors, 49 resistors, 20 connectors, 10 ICs and 3 transistors.

Main components

5

README

README.md

Sourccey Electrical

Open-source hardware design files for the Sourccey electrical system.

This repository is intended to contain the complete KiCad design source, component data, and documentation needed to inspect, modify, manufacture, and assemble the hardware.

Status

This repository contains the Sourccey v1.3.8 electrical design release. Always review the release notes and complete your own manufacturing and safety validation before building hardware.

Repository layout

The repository is organized by editable design sources, manufacturing outputs, and supporting documentation:

text
.
├── pcb/
│   ├── <board-name>.kicad_pro
│   ├── <board-name>.kicad_sch
│   ├── <board-name>.kicad_pcb
│   ├── symbols/             # Project-specific KiCad symbols
│   └── footprints/          # Project-specific KiCad footprints
├── bom/
│   ├── bom.csv              # Human/reviewable bill of materials
│   └── pos.csv              # Pick-and-place / centroid data
├── fab/                     # Released Gerbers and drill files, if tracked
├── docs/                    # Design notes, assembly, and test instructions
└── README.md

The generic layout above describes the intended convention for additional boards. The current checked-in release is organized as follows:

text
.
|-- pcb/sourccey-v1.3.8/
|   |-- *.kicad_pro       # KiCad project
|   |-- *.kicad_sch       # Main and hierarchical schematics
|   |-- *.kicad_pcb       # PCB layout
|   |-- symbols/           # Project-specific KiCad symbols
|   |-- footprints/        # Project-specific KiCad footprints
|   `-- models/            # Optional 3D model references
|-- manufacturing/sourccey-v1.3.8/
|   |-- gerbers/           # Gerbers, drill files, and Gerber archive
|   |-- bom/               # Bill of materials exports
|   `-- cpl/               # Pick-and-place / component placement exports
|-- docs/                  # Design notes, assembly, and test instructions
`-- README.md

Each board should keep its .kicad_pro, .kicad_sch, and .kicad_pcb files together. Do not commit KiCad lock files, personal project settings, or backup files.

Opening the design

The current design is Sourccey v1.3.8 and was saved with KiCad 9.0.

  1. Install KiCad 9, including the standard symbol, footprint, and 3D-model libraries.
  2. Clone this repository.
  3. Open pcb/sourccey-v1.3.8/sourccey_pcb.kicad_pro.
  4. Review the schematic before opening or editing the PCB.
  5. Update the project libraries only with care: project-local symbols and footprints should be stored in this repository so the design remains reproducible.

The project includes its hierarchical Power Electronics.kicad_sch sheet and the custom DRV8874 symbol and footprint. See the README under the version's models/ directory for two optional STEP models that are not yet included.

BOM and POS data

The manufacturing/sourccey-v1.3.8/ directory contains the files needed to order and assemble the board:

  • Gerbers for copper, solder mask, solder paste, silkscreen, and the board outline, plus the Gerber job file and packaged archive.
  • PTH and NPTH drill files for plated and non-plated holes.
  • A KiCad BOM export and a vendor-formatted BOM for purchasing.
  • KiCad and vendor-formatted CPL (component placement / pick-and-place) data.

These are manufacturing outputs, not the editable source of truth. Regenerate them from the released KiCad project whenever the design changes.

The BOM should identify at least:

  • Reference designators
  • Quantity
  • Value and footprint
  • Manufacturer and manufacturer part number, when known
  • Distributor part number, when known
  • Designator exclusions or DNP status

The POS file should identify each populated reference, X/Y position, rotation, side, and the coordinate origin used for the export. BOM and POS exports are manufacturing inputs: regenerate them from the released KiCad sources and record the KiCad version and export settings in the release notes.

Manufacturing components

Manufacturing outputs are generated from the released PCB source. A release should include, or link to, the corresponding Gerber, drill, drawing, BOM, and POS package. Keep generated outputs in fab/ or a release artifact rather than mixing them with editable KiCad source files.

The checked-in v1.3.8 outputs are under manufacturing/sourccey-v1.3.8/, including original and vendor-formatted BOM and CPL files, Gerbers, drill files, and the Gerber archive.

The PCB uses 2 oz copper on the copper layers. Confirm the fabricator's stackup and copper-weight capabilities before ordering.

Before manufacturing, check at minimum:

  • Schematic and PCB annotations are synchronized.
  • Electrical rules and design rules pass.
  • Board outline, mounting holes, clearances, and layer stack are correct.
  • Footprints and 3D/component orientations are correct.
  • BOM substitutions, DNP parts, polarity, and assembly side are reviewed.
  • Gerbers and drill files are inspected in a separate viewer.

Documentation

See the Vulcan Robotics documentation for the broader Sourccey project. This repository is the electrical reference for wiring and board-level build details. The documentation site also links to the related hardware, software, and LeRobot-compatible repositories. Software setup and hardware-kit assembly instructions are currently listed there as coming soon.

Release notes

See RELEASE_NOTES.md for the v1.3.8 release summary, manufacturing package details, and validation record.

Contributing

Please open an issue before making a substantial design change. Pull requests should explain the motivation, identify affected boards, and include updated schematic/PCB files and regenerated BOM/POS or manufacturing outputs when applicable. Include screenshots or test results for changes that affect layout, assembly, or electrical behavior.

Licensing

Unless stated otherwise in a subdirectory, this project is released under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0). This license permits personal, educational, commercial, and manufacturing use. If you distribute a modified design or a product based on it, you must preserve the notices, make the corresponding source available, and license the modified covered source under CERN-OHL-S-2.0. Private modifications do not need to be published unless they are distributed.

Add the full license text as LICENSE before publishing the repository.

Third-party symbols, footprints, models, and datasheets may have separate licenses. Preserve their notices and verify redistribution rights before committing them.

Disclaimer

This hardware is provided without warranty. You are responsible for reviewing the design, complying with applicable laws and safety requirements, and validating any manufactured or modified hardware before use.

Parts

163
QtyValueFootprintReferences
290.1uFCapacitor_SMD:C_0603_1608MetricC3, C10, C15, C16, C17, C18, C19, C20, C21, C22, C23, C30, C32, C35, C37, C40 +13
17R 10k OhmResistor_SMD:R_0805_2012MetricR11, R14, R15, R18, R19, R22, R23, R26, R27, R30, R34, R35, R37, R46, R48, R49 +1
15Conn_01x02_PinConnector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_VerticalJ2, J3, J4, J5, J6, J8, J9, J11, J12, J13, J14, J15, J16, J17, J18
13R 100k OhmResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R31, R40, R45
8NetTie_2NetTie:NetTie-2_SMD_Pad2.0mmNT1, NT2, NT3, NT5, NT6, NT7, NT8, NT9
6100uFCapacitor_SMD:CP_Elec_6.3x7.7C1, C4, C11, C12, C13, C14
6TestPointTestPoint:TestPoint_Pad_2.0x2.0mmTP1, TP2, TP3, TP4, TP5, TP6
522nFCapacitor_SMD:C_0402_1005MetricC24, C25, C26, C27, C28
5DRV8874PWPRDRV8874PWPR_:PWP0016J_LU1, U2, U3, U4, U5
5R 20k OhmResistor_SMD:R_0805_2012MetricR13, R17, R21, R25, R29
5R 680 OhmResistor_SMD:R_0805_2012MetricR12, R16, R20, R24, R28
41uFCapacitor_SMD:C_0805_2012MetricC2, C31, C39, C42
422uFCapacitor_SMD:C_1206_3216MetricC34, C38, C48, C51
44700uFCapacitor_THT:CP_Radial_D13.0mm_P5.00mmC33, C36, C47, C50
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
310uFCapacitor_SMD:C_0805_2012MetricC29, C45, C53
2NMOSPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
2R 68 OhmResistor_SMD:R_0603_1608MetricR41, R44
2SW_SPSTButton_Switch_SMD:SW_SPDT_PCM12FuelGaugeSwitch1, LightSwitch1
110 nFCapacitor_SMD:C_0603_1608MetricC41
11000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC44
110k NTCConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalTH1
116V_TVSDiode_SMD:D_SMBD1
1BQ34Z100PWR-R2Package_SO:TSSOP-14_4.4x5mm_P0.65mmU6
1Conn_01x01_PinConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ10
1Conn_01x03Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ7
1Conn_01x04_PinConnector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_VerticalJ20
1Conn_01x04_PinConnector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_VerticalJ19
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ1
1D_SchottkyDiode_SMD:D_SMBD2
1IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ3
1LOGOSourccey:sourcceyG***
1LTC4365DDBPackage_DFN_QFN:DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mmU8
1MCP3008Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU7
1R 100 OhmResistor_SMD:R_0805_2012MetricR47
1R 12.5m OhmResistor_SMD:R_2512_6332MetricR36
1R 16.5k OhmResistor_SMD:R_0805_2012MetricR43
1R 1k OhmResistor_SMD:R_0805_2012MetricR33
1R 249k OhmResistor_SMD:R_0805_2012MetricR42
1R 24k OhmResistor_SMD:R_0805_2012MetricR39
1R 510k OhmResistor_SMD:R_0805_2012MetricR38
1TCA9517DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU10
1TPS7A1633DGNRPackage_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mmU9

Similar boards

  • 4 layers66 × 38 mmFan power health, the printed circuit board in 3D

    Fan power health

    AxelMcKenna/AFX-1000

    RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

    84 parts1
  • 2 layers65 × 56 mmPiADC2, the printed circuit board in 3D

    PiADC2

    capconix/PiADC2

    PiADC open source project successor, the PiADC2 - A simple data acquisition board for use with the model B Raspberry Pis

    72 parts1
  • 4 layers65 × 26 mmShémas, the printed circuit board in 3D

    Shémas

    CarlDominicA/Projet_Module_CAN

    CA

    43 parts
  • 2 layers120 × 100 mmSEVILLA ME, the printed circuit board in 3D

    SEVILLA ME

    Noxctis/CpE2303L

    28 parts
  • 2 layers110 × 110 mmDiplom, the printed circuit board in 3D

    Diplom

    vlad-chan/diploma-pcb

    Repository for my diploma work. PCB design and schematic.

    130 partsMIT
  • 2 layers71.5 × 36 mmESP32 MIDI2CV, the printed circuit board in 3D

    ESP32 MIDI2CV

    collaborative-music-lab/ESP_MIDI

    ESP32-s3 midi controller

    23 parts20
  • 2 layers95 × 78 mmSSRU v3.1, the printed circuit board in 3D

    SSRU v3.1

    HKUST-Red-Bird-Racing-EVRT/GEN5_ELEC

    Repository for RBR EVRT 2025 EE

    107 parts3
  • 2 layers45 × 95 mmSub uproc, the printed circuit board in 3D

    Sub uproc

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    59 parts1

Questions

How big is the Sourccey pcb PCB?

It measures 112 × 98 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sourccey pcb use?

163 parts, built around the MCP3008-I/P, BQ34Z100PWR-R2, TCA9517D and TPS7A1633DGNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sourccey pcb KiCad files?

From the vulcan-forge/sourccey-electrical repository on GitHub, at the commit this page was made from: the board is pcb/sourccey-v1.3.8/sourccey_pcb.kicad_pcb and its schematic pcb/sourccey-v1.3.8/Power Electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sourccey pcb design in my own project?

Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).