
Fan power health
AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

Open Source Electrical Repository for Sourccey
Sourccey pcb is an open-source printed circuit board by vulcan-forge, from the vulcan-forge/sourccey-electrical repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 112 × 98 mm with 163 parts on 138 nets, routed with 1,321 tracks and 120 vias.
It is built around the MCP3008-I/P, BQ34Z100PWR-R2 and TCA9517D, with the TPS7A1633DGNR and IRLZ44N among its other parts. Its parts include 57 capacitors, 49 resistors, 20 connectors, 10 ICs and 3 transistors.
Open-source hardware design files for the Sourccey electrical system.
This repository is intended to contain the complete KiCad design source, component data, and documentation needed to inspect, modify, manufacture, and assemble the hardware.
This repository contains the Sourccey v1.3.8 electrical design release. Always review the release notes and complete your own manufacturing and safety validation before building hardware.
The repository is organized by editable design sources, manufacturing outputs, and supporting documentation:
.
├── pcb/
│ ├── <board-name>.kicad_pro
│ ├── <board-name>.kicad_sch
│ ├── <board-name>.kicad_pcb
│ ├── symbols/ # Project-specific KiCad symbols
│ └── footprints/ # Project-specific KiCad footprints
├── bom/
│ ├── bom.csv # Human/reviewable bill of materials
│ └── pos.csv # Pick-and-place / centroid data
├── fab/ # Released Gerbers and drill files, if tracked
├── docs/ # Design notes, assembly, and test instructions
└── README.mdThe generic layout above describes the intended convention for additional boards. The current checked-in release is organized as follows:
.
|-- pcb/sourccey-v1.3.8/
| |-- *.kicad_pro # KiCad project
| |-- *.kicad_sch # Main and hierarchical schematics
| |-- *.kicad_pcb # PCB layout
| |-- symbols/ # Project-specific KiCad symbols
| |-- footprints/ # Project-specific KiCad footprints
| `-- models/ # Optional 3D model references
|-- manufacturing/sourccey-v1.3.8/
| |-- gerbers/ # Gerbers, drill files, and Gerber archive
| |-- bom/ # Bill of materials exports
| `-- cpl/ # Pick-and-place / component placement exports
|-- docs/ # Design notes, assembly, and test instructions
`-- README.mdEach board should keep its .kicad_pro,
.kicad_sch, and .kicad_pcb files together. Do not commit KiCad lock files,
personal project settings, or backup files.
The current design is Sourccey v1.3.8 and was saved with KiCad 9.0.
pcb/sourccey-v1.3.8/sourccey_pcb.kicad_pro.The project includes its hierarchical Power Electronics.kicad_sch sheet and
the custom DRV8874 symbol and footprint. See the README under the version's
models/ directory for two optional STEP models that are not yet included.
The manufacturing/sourccey-v1.3.8/ directory contains the files needed to
order and assemble the board:
These are manufacturing outputs, not the editable source of truth. Regenerate them from the released KiCad project whenever the design changes.
The BOM should identify at least:
The POS file should identify each populated reference, X/Y position, rotation, side, and the coordinate origin used for the export. BOM and POS exports are manufacturing inputs: regenerate them from the released KiCad sources and record the KiCad version and export settings in the release notes.
Manufacturing outputs are generated from the released PCB source. A release
should include, or link to, the corresponding Gerber, drill, drawing, BOM, and
POS package. Keep generated outputs in fab/ or a release artifact rather than
mixing them with editable KiCad source files.
The checked-in v1.3.8 outputs are under
manufacturing/sourccey-v1.3.8/, including original and vendor-formatted BOM
and CPL files, Gerbers, drill files, and the Gerber archive.
The PCB uses 2 oz copper on the copper layers. Confirm the fabricator's stackup and copper-weight capabilities before ordering.
Before manufacturing, check at minimum:
See the Vulcan Robotics documentation for the broader Sourccey project. This repository is the electrical reference for wiring and board-level build details. The documentation site also links to the related hardware, software, and LeRobot-compatible repositories. Software setup and hardware-kit assembly instructions are currently listed there as coming soon.
See RELEASE_NOTES.md for the v1.3.8 release summary, manufacturing package details, and validation record.
Please open an issue before making a substantial design change. Pull requests should explain the motivation, identify affected boards, and include updated schematic/PCB files and regenerated BOM/POS or manufacturing outputs when applicable. Include screenshots or test results for changes that affect layout, assembly, or electrical behavior.
Unless stated otherwise in a subdirectory, this project is released under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0). This license permits personal, educational, commercial, and manufacturing use. If you distribute a modified design or a product based on it, you must preserve the notices, make the corresponding source available, and license the modified covered source under CERN-OHL-S-2.0. Private modifications do not need to be published unless they are distributed.
Add the full license text as LICENSE before publishing the repository.
Third-party symbols, footprints, models, and datasheets may have separate licenses. Preserve their notices and verify redistribution rights before committing them.
This hardware is provided without warranty. You are responsible for reviewing the design, complying with applicable laws and safety requirements, and validating any manufactured or modified hardware before use.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C10, C15, C16, C17, C18, C19, C20, C21, C22, C23, C30, C32, C35, C37, C40 +13 |
| 17 | R 10k Ohm | Resistor_SMD:R_0805_2012Metric | R11, R14, R15, R18, R19, R22, R23, R26, R27, R30, R34, R35, R37, R46, R48, R49 +1 |
| 15 | Conn_01x02_Pin | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J2, J3, J4, J5, J6, J8, J9, J11, J12, J13, J14, J15, J16, J17, J18 |
| 13 | R 100k Ohm | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R31, R40, R45 |
| 8 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1, NT2, NT3, NT5, NT6, NT7, NT8, NT9 |
| 6 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C1, C4, C11, C12, C13, C14 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | 22nF | Capacitor_SMD:C_0402_1005Metric | C24, C25, C26, C27, C28 |
| 5 | DRV8874PWPR | DRV8874PWPR_:PWP0016J_L | U1, U2, U3, U4, U5 |
| 5 | R 20k Ohm | Resistor_SMD:R_0805_2012Metric | R13, R17, R21, R25, R29 |
| 5 | R 680 Ohm | Resistor_SMD:R_0805_2012Metric | R12, R16, R20, R24, R28 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C31, C39, C42 |
| 4 | 22uF | Capacitor_SMD:C_1206_3216Metric | C34, C38, C48, C51 |
| 4 | 4700uF | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C33, C36, C47, C50 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C29, C45, C53 |
| 2 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | R 68 Ohm | Resistor_SMD:R_0603_1608Metric | R41, R44 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | FuelGaugeSwitch1, LightSwitch1 |
| 1 | 10 nF | Capacitor_SMD:C_0603_1608Metric | C41 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C44 |
| 1 | 10k NTC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | TH1 |
| 1 | 16V_TVS | Diode_SMD:D_SMB | D1 |
| 1 | BQ34Z100PWR-R2 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J20 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J19 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SMB | D2 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | LOGO | Sourccey:sourccey | G*** |
| 1 | LTC4365DDB | Package_DFN_QFN:DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mm | U8 |
| 1 | MCP3008 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | R 100 Ohm | Resistor_SMD:R_0805_2012Metric | R47 |
| 1 | R 12.5m Ohm | Resistor_SMD:R_2512_6332Metric | R36 |
| 1 | R 16.5k Ohm | Resistor_SMD:R_0805_2012Metric | R43 |
| 1 | R 1k Ohm | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | R 249k Ohm | Resistor_SMD:R_0805_2012Metric | R42 |
| 1 | R 24k Ohm | Resistor_SMD:R_0805_2012Metric | R39 |
| 1 | R 510k Ohm | Resistor_SMD:R_0805_2012Metric | R38 |
| 1 | TCA9517D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | TPS7A1633DGNR | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm | U9 |

AxelMcKenna/AFX-1000
RMX-1000-inspired effects processor for macOS, AU and VST3, built on a shared C++20 engine. Standalone Daisy Seed 3 hardware with two main PCBs and a custom housing is in development.

capconix/PiADC2
PiADC open source project successor, the PiADC2 - A simple data acquisition board for use with the model B Raspberry Pis






duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
It measures 112 × 98 mm and has 2 copper layers, 1.6 mm thick.
163 parts, built around the MCP3008-I/P, BQ34Z100PWR-R2, TCA9517D and TPS7A1633DGNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vulcan-forge/sourccey-electrical repository on GitHub, at the commit this page was made from: the board is pcb/sourccey-v1.3.8/sourccey_pcb.kicad_pcb and its schematic pcb/sourccey-v1.3.8/Power Electronics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).