
PowerAnalyzer ACS71020 V2
Vrail99/PowerAnalyzer
Project for the Power Analyzer based on a COTS Power Monitoring IC

Project for the Power Analyzer based on a COTS Power Monitoring IC
LidPCB is an open-source printed circuit board by Vrail99, from the Vrail99/PowerAnalyzer repository on GitHub. It is a 2-layer board of 58 × 58 mm with 30 parts on 20 nets, routed with 246 tracks and 26 vias.
It is built around the CAP1293-1-SN, R1200N002A-TR-FE and XC6206P332MR. Its parts include 9 resistors, 8 capacitors, 4 ICs, 1 connector and 1 inductor.
Project for the Power Analyzer based on a COTS Power Monitoring IC
Hackaday Project Page:
https://hackaday.io/project/180663-power-analyzer-based-on-a-cots-power-monitoring-ic
Please visit this page for further information.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R7, R9 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C6, C7 |
| 3 | TestPoint_Pad_D2.0mm | TestPoint:TestPoint_Pad_D2.0mm | +15V, 5V, GND |
| 2 | 4.7u | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 1 | 140k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 1meg | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 22pF | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8 |
| 1 | 22uH | LidPCB:IND_LQH2MCN220K02L | L1 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | CAP1293-1-SN | LidPCB:CAP1293-1-SN | U4 |
| 1 | Conn_01x8_Female | LidPCB:FPC_8-pin_horizontal_686108188622 | J1 |
| 1 | OLED-Display | LidPCB:FPC_Soldering_P0.65x25Pin_OLED | U3 |
| 1 | R1200N002A-TR-FE | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U1 |
The 26 most common of 30 parts.

Vrail99/PowerAnalyzer
Project for the Power Analyzer based on a COTS Power Monitoring IC

Vrail99/PowerAnalyzer
Project for the Power Analyzer based on a COTS Power Monitoring IC

Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!

sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.



KarlK90/yaemk-split-kb
5x8 Split keyboard with thumb-clusters, rotary encoders and oleds.

ebastler/E80-1800
QMK compatible PCB replacement for Cherry G80-1800

It measures 58 × 58 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the CAP1293-1-SN, R1200N002A-TR-FE and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Vrail99/PowerAnalyzer repository on GitHub, at the commit this page was made from: the board is PCB-files/LidPCB/LidPCB.kicad_pcb and its schematic PCB-files/LidPCB/LidPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Vrail99 before reusing the design.