

SimpleTM32
USB-powered STM32F1-based breakout board.
- Size
- 41 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 39
- Pads
- 134
- Tracks, vias
- 283, 17
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Nov 2020
- Updated
- 5 Dec 2020
Overview
SimpleTM32 is an open-source printed circuit board by pms67, from the pms67/STM32F1-Breakout-Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 41 × 36 mm with 26 parts on 39 nets, routed with 283 tracks and 17 vias.
It is built around the STM32F103C8T6 and XC6206P332MR. Its parts include 11 capacitors, 4 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
2STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSTM32F1-Breakout-Board
USB-powered STM32F1-based breakout board. Video: https://www.youtube.com/watch?v=wLwKgMBWhpY
You can order this board (incl. SMT assembly) at https://www.jlcpcb.com. Gerber and assembly files are in the relevant repo folders.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C9 |
| 2 | 1k5 | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | Conn_01x15 | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2, J3 |
| 1 | 100R | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 27n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U1 |
Similar boards
- 2 layers41.7 × 33.5 mm

- 4 layers52 × 52 mm

- 4 layers21 × 51 mm

Easyduino RP2040
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
65 parts755CERN-OHL-P-2.0 - 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers35.9 × 62.7 mm

Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241 - 2 layers285 × 94.6 mm

- 2 layers405.8 × 127.3 mm

- 2 layers165.8 × 130.8 mm

YAEMK
KarlK90/yaemk-split-kb
5x8 Split keyboard with thumb-clusters, rotary encoders and oleds.
218 parts128GPL-3.0
Questions
How big is the SimpleTM32 PCB?
It measures 41 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SimpleTM32 use?
26 parts, built around the STM32F103C8T6 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SimpleTM32 KiCad files?
From the pms67/STM32F1-Breakout-Board repository on GitHub, at the commit this page was made from: the board is SimpleTM32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SimpleTM32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).