2 layers72 × 45 mm
Brizer ZigBee
kvazimoda24/TionO2-ZigBee
Ядром проекта является микроконтроллер ATmega328P. Для работы по протоколу ZigBee используется модуль E18-MS1-PCB.
48 parts10
2 layers100 × 75 mm
Smart roller gate controller
vooon/smart-roller-gate-controller2ESP32 based roller gate controller with ZigBee remotes
- Size
- 100 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 43
- Pads
- 194
- Tracks, vias
- 506, 46
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jan 2020
- Updated
- 26 Oct 2021
Overview
Smart roller gate controller is an open-source printed circuit board by vooon, from the vooon/smart-roller-gate-controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 75 mm with 44 parts on 43 nets, routed with 506 tracks and 46 vias.
It is built around the E18-MS1-PCB, ESP32-WROOM-32U and HLK-PM01, with the BSS123, PE014005 and HT7333-A among its other parts. Its parts include 10 resistors, 4 connectors, 3 fuses, 2 capacitors and 2 switches. It belongs with the radio and wireless and home automation and IoT boards and the ESP32 boards of this library.
Main components
6
E18-MS1-PCB
SMD,23x14.1mm-40℃~+125℃ -97dBm 200m 27mA 28mA 4dBm CC2530 Chip Hardware encryption On-board PCB Antenna SMD,23x14.1mm ZigBee Modules ROHSChengdu Ebyte Elec TechZigBee Modules
ESP32-WROOM-32U
SMD,19.2x18mm-40℃~+85℃ -97dBm 2.4GHz 20.5dBm 3V~3.6V Bluetooth4.2 ESP32-DOWD UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC、CAN SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
PE014005
插件,20x10mm-40℃~+85℃ 125Ω 200mW 400V@AC 5A 5A@30VDC 5V 8ms 8ms AgNi One set changeover: 1C (SPDT - changeover) 插件,20x10mm Power Relays ROHSTE ConnectivityPower Relays
HT7333-A
SOT-89-3-25℃~+70℃ 1 12V 250mA 3.3V 3uA 90mV@(40mA) Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdsmart-roller-gate-controller
ESP32 based roller gate controller with ZigBee remotes
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R5, R7, R8 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R9, R10 |
| 3 | n/c | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R6 |
| 2 | 10.0 | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C1, C2 |
| 2 | BSS123 | digikey-footprints:SOT-23-3 | VT1, VT2 |
| 2 | D | Diode_SMD:D_SOD-123 | VD1, VD2 |
| 2 | L | Connector_Wire:SolderWirePad_1x01_Drill1.2mm | J1, J3 |
| 2 | LOGO | ninoslavb-footprinti:high | G***, G*** |
| 2 | N | Connector_Wire:SolderWirePad_1x01_Drill1.2mm | J2, J4 |
| 2 | PE014005 | smart-roller-gate-controller:PE014005 | K1, K2 |
| 2 | Polyfuse 0.3A | Fuse:Fuse_Bourns_MF-RHT200 | F2, F3 |
| 1 | 440V | Varistor:RV_Disc_D21.5mm_W4.9mm_P10mm | RV1 |
| 1 | CFG0 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | CFG1 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | DISPLAY | smart-roller-gate-controller:CONN-TE-MICROMATCH-5X2-PTH-BOSS | XP2 |
| 1 | E18-MS1-PCB | RF_Module:E18-MS1-PCB | DD1 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | DD2 |
| 1 | FENCE INPUTS | smart-roller-gate-controller:CONN-KF250-BA-4 | XP11 |
| 1 | FENCE POWER | smart-roller-gate-controller:CONN-KF250-BA-4 | XP10 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | HT7333-A | Package_TO_SOT_SMD:SOT-89-3 | DA1 |
| 1 | MAINS | smart-roller-gate-controller:CONN-KF250-BA-4 | XP6 |
| 1 | PZEM | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | XP7 |
| 1 | Polyfuse 2.5A | Fuse:Fuse_Bourns_MF-RHT1300 | F1 |
| 1 | ROLLER MOTOR | smart-roller-gate-controller:CONN-KF250-BA-4 | XP9 |
| 1 | ROLLER SENSOR | smart-roller-gate-controller:CONN-KF250-BA-4 | XP4 |
| 1 | SOICbite | SOICbite:SOIC_clipProgSmall | XP1 |
| 1 | SPI | smart-roller-gate-controller:CONN-TE-MICROMATCH-5X2-PTH-BOSS | XP3 |
The 43 most common of 44 parts.
Questions
How big is the Smart roller gate controller PCB?
It measures 100 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smart roller gate controller use?
44 parts, built around the E18-MS1-PCB, ESP32-WROOM-32U, HLK-PM01 and BSS123. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart roller gate controller KiCad files?
From the vooon/smart-roller-gate-controller repository on GitHub, at the commit this page was made from: the board is hw/smart-roller-gate-controller/smart-roller-gate-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart roller gate controller design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers87.6 × 35.6 mm
- 2 layers59.5 × 27 mm
Desk lamp cc2530
Czubixx/zigbee-desk-lamp
DIY Zigbee desk lamp based on CC2530 controllable smart light for workbench/desk use.
28 parts - 2 layers121.7 × 22.5 mm
- 2 layers58 × 100 mm
Sensor node
unicab369/ESP-MESS
I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies.
106 parts - 2 layers90 × 90 mm
Logger pcb kicad
mrheltic/Logger
Just a data acquisition system built using an ESP32 microcontroller board, using ADS1115 to acquire datas and save them on SD, plot them with Python or compute the mean on the OLED Display
40 parts5GPL-3.0 - 2 layers15.5 × 47 mm
Velopath final
BananaGithubserfer/velopath
Разработка устройств велосипедной навигации velopath
66 partsGPL-3.0 - 2 layers33.1 × 61.4 mm
