Skip to the content
123456789101112131415161718192021222324

E18-MS1-PCB

Chengdu Ebyte Elec TechExtended

-40℃~+125℃ -97dBm 200m 27mA 28mA 4dBm CC2530 Chip Hardware encryption On-board PCB Antenna SMD,23x14.1mm ZigBee Modules ROHS

Part id
chengdu-ebyte-elec-tech/E18-MS1-PCB
Category
ZigBee Modules
Package
SMD,23x14.1mm
Pins
24
In stock
246 at JLCPCB (C97344)
Used on
6 open-source boards

Overview

The E18-MS1-PCB is a zigBee Module made by Chengdu Ebyte Elec Tech in a SMD,23x14.1mm package with 24 pins. -40℃~+125℃ -97dBm 200m 27mA 28mA 4dBm CC2530 Chip Hardware encryption On-board PCB Antenna SMD,23x14.1mm ZigBee Modules ROHS.

PCBKit's library has its KiCad symbol (RF_Module:E18-MS1-PCB, from KiCad's library) and its footprint (RF_Module:E18-MS1-PCB, from KiCad's library), ready for a KiCad board. 246 are in stock at JLCPCB (part C97344). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1GND2VDD3P2.24P2.15P2.06P1.77P1.610P1.511P1.412P1.313P1.214P1.115P1.016P0.717P0.618P0.519P0.420P0.321P0.222P0.123P0.024RESET
RF_Module:E18-MS1-PCBFrom KiCad's library

Footprint

123456789101112131415161718192021222324
RF_Module:E18-MS1-PCBFrom KiCad's library

Pinout

24
The pins of the E18-MS1-PCB
PinNameType
1GNDPower in
2VDDPower in
3P2.2Input/output
4P2.1Input/output
5P2.0Input/output
6P1.7Input/output
7P1.6Input/output
8NCNot connected
9NCNot connected
10P1.5Input/output
11P1.4Input/output
12P1.3Input/output
13P1.2Input/output
14P1.1Input/output
15P1.0Input/output
16P0.7Input/output
17P0.6Input/output
18P0.5Input/output
19P0.4Input/output
20P0.3Input/output
21P0.2Input/output
22P0.1Input/output
23P0.0Input/output
24RESETInput

Open-source boards using it

6
  • 2 layers72 × 45 mmBrizer ZigBee, the printed circuit board in 3D

    Brizer ZigBee

    kvazimoda24/TionO2-ZigBee

    Ядром проекта является микроконтроллер ATmega328P. Для работы по протоколу ZigBee используется модуль E18-MS1-PCB.

    48 parts10
  • 2 layers87.6 × 35.6 mmYNXT WM01, the printed circuit board in 3D

    YNXT WM01

    RJSDevel/YNXT-WM01

    Zigbee Water meter device

    45 parts9GPL-3.0
  • 2 layers100 × 75 mmSmart roller gate controller, the printed circuit board in 3D

    Smart roller gate controller

    vooon/smart-roller-gate-controller

    ESP32 based roller gate controller with ZigBee remotes

    44 parts2GPL-3.0
  • 2 layers59.5 × 27 mmDesk lamp cc2530, the printed circuit board in 3D

    Desk lamp cc2530

    Czubixx/zigbee-desk-lamp

    DIY Zigbee desk lamp based on CC2530 controllable smart light for workbench/desk use.

    28 parts
  • 2 layers58 × 100 mmSensor node, the printed circuit board in 3D

    Sensor node

    unicab369/ESP-MESS

    I am building a Wireless Bridge System that can manage multiple devices using a variety of wireless technologies.

    106 parts

Questions

Is there a KiCad symbol and footprint for the E18-MS1-PCB?

Yes. The symbol is RF_Module:E18-MS1-PCB and the footprint RF_Module:E18-MS1-PCB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the E18-MS1-PCB?

SMD,23x14.1mm, with 24 pins. Its footprint is drawn on this page.

Where is the E18-MS1-PCB datasheet?

Chengdu Ebyte Elec Tech publishes it: the Datasheet link on this page opens it.

Where can I order the E18-MS1-PCB?

JLCPCB lists it as part C97344, with 246 in stock; the sellers' links on this page open their listings.

Which open-source boards use the E18-MS1-PCB?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.