Skip to the content
2 layers78 × 24 mmKinect, the printed circuit board in 3D

This repository contains a PCB and a basic case for using only the camera board from the Xbox 360 Kinect.

Size
78 × 24 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
15
Pads
75
Tracks, vias
107, 39
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 Jan 2025
Updated
9 Jul 2026

Overview

Kinect is an open-source printed circuit board by vojtapl, from the vojtapl/xbox360-kinect-lite repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 78 × 24 mm with 21 parts on 15 nets, routed with 107 tracks and 39 vias.

It is built around the AP63203WU, LM3670MFX-1.8 and USBLC6-2SC6. Its parts include 6 capacitors, 3 ICs, 2 resistors, 2 connectors and 2 inductors.

Main components

3

README

README.md

Pcb and Case for Shrinking the Xbox 360 Kinect

This repository contains a PCB and a basic case for using only the camera board from the Xbox 360 Kinect.

I have recently read this great article, which lays out the idea of making a Kinect Lite from an old Xbox 360 Kinect by isolating the camera board, which can function separately. As I saw one being sold for next to nothing with a broken tilt motor, I thought it would be a great idea to implement the ideas mentioned in the article. The repository contains the PCB (including LCSC part numbers), which generates all the necessary voltage rails, and a basic 3D-printable case.

What might need improving

  • The case model is a bit crude, as I used this as a opportunity to learn some basics of FreeCAD. Also, the camera PCB screws do not seem to be arranged in a rectangle, so one of the mounting holes might need enlarging.
  • The case walls are a bit too long and flex a bit when squeezed.
  • I am uncertain whether the fan and the fuse (not really sure what exactly it is) on the IR transmitter is really needed.

Assembly

  1. Acquire the Xbox 360 Kinect, make the PCB, and print the case.
  2. Tear down the Kinect. Example video.
  3. What we will need from it is the PCB to which the cameras are connected (without the LED, as it connects to a PCB which we will not use), the aluminum chassis with the cameras, the cooling fan, some of the screws and standoffs, and the lens plastic holder with the lenses.
  4. Cover the cameras and the IR transmitter with tape and cut the aluminum chassis with a saw next to the cameras. One cut will be next to the two cameras - when looking from the inside - right next to the white plastics, and the other will just remove the bent part next to the IR transmitter. See the photos of how it should look afterward. Remember to clean everything from the shavings.

cut chassis

  1. Get the case and add the lenses (note that the IR projector one has a small notch) and insert them into the case. Add the plastic holder on top and screw it in (it might need a corner cut).
  2. Insert the PCB correctly onto the camera PCB - either use the standoffs with the included screws and then push the small connector in, or push the connector in first so that the small connector connects to the middle pins (with one row on the left and one on the right unconnected). Now is a good time to test things out.
  3. Screw the camera PCB into the cut aluminum chassis and connect the cameras, fan, and the IR transmitter (every cable should be connected by now).
  4. Insert the fan with the cable sticking up and the rubber padding away from the air intake.

case with fan

  1. Screw in the chassis assembly.
  2. Screw in the back plate, and you are done.

Frequently Asked Questions

  • What to do with the thermistor (see image provided by Bolb347 bellow)? As it connects to the mainboard, which we do not use and it seems to work flawlessly without it, you can throw it out. thermisotr image

Power consumption

The measurements were made with KWS-2301C, a cheap USB-C power meter.

  • Idle Idle power consumption
  • Running with freenect-regview Idle power consumption

Images

On the ruler look at the top scale, as that one is in centimeters.

  • View from right View from right
  • View from side View from side
  • View from above View from above
  • New PCB (image provided by Bolb347) PCB

Parts

21
QtyValueFootprintReferences
310uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C7
222uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6
25K1Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2L 4u7Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolderL1, L2
2MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
11V8TestPoint:TestPoint_Loop_D2.50mm_Drill1.85mmTP1
13V3TestPoint:TestPoint_Loop_D2.50mm_Drill1.85mmTP2
15VTestPoint:TestPoint_Loop_D2.50mm_Drill1.85mmTP3
1AP63203WUPackage_TO_SOT_SMD:TSOT-23-6U2
1Female Header 2x5P, P=1.27mmConnector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_VerticalJ3
1GNDTestPoint:TestPoint_Loop_D2.50mm_Drill1.85mmTP4
1LM3670MFX-1.8Package_TO_SOT_SMD:TSOT-23-5U1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6_HandsolderingU3
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ2

Similar boards

  • 2 layers90 × 25.1 mmKinect, the printed circuit board in 3D

    Kinect

    mhered/KiCAD_udemy_course

    My notes on the course "PCB design with KiCAD - updated for KiCAD 9" by Dr Peter Dalmaris in Udemy

    24 parts2
  • 2 layers133.4 × 44.4 mmLocust, the printed circuit board in 3D

    Locust

    hlord2000/Locust

    A Cricut Joy hardware replacement

    42 parts7CERN-OHL-P-2.0
  • 4 layers61 × 100 mmBigCore, the printed circuit board in 3D

    BigCore

    Dschadu/Geistwerk-BigCore

    An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.

    152 parts4CERN-OHL-W-2.0
  • 2 layers137 × 84 mmESP32-Geiger Counter, the printed circuit board in 3D

    ESP32-Geiger Counter

    AronASzucs/Avalanche32

    Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.

    89 parts3
  • 2 layers46.9 × 46.6 mmFourth, the printed circuit board in 3D

    Fourth

    Bhakti-A/Maya_V_FlightController

    This is a custom flight controller PCB designed for drones.

    84 parts1
  • 4 layers100 × 49.8 mmCrossfire, the printed circuit board in 3D

    Crossfire

    lightsource-nz/crossfire_mk5

    crossfire: USB-MIDI forwarding agent for embedded USB-MIDI smart hubs

    110 parts1
  • 2 layers48.1 × 48 mmFlight controller, the printed circuit board in 3D

    Flight controller

    0xmanidev/hackydrone

    this is a drone project made for outpost event

    68 partsMIT
  • 2 layers47.7 × 51.2 mmCO2Monitor, the printed circuit board in 3D

    CO2Monitor

    AntoG00/ESP32-C6-CO2-Monitor

    Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.

    54 partsMIT

Questions

How big is the Kinect PCB?

It measures 78 × 24 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kinect use?

21 parts, built around the AP63203WU, LM3670MFX-1.8 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kinect KiCad files?

From the vojtapl/xbox360-kinect-lite repository on GitHub, at the commit this page was made from: the board is pcb/kinect.kicad_pcb and its schematic pcb/kinect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kinect design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).