

BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.
- Size
- 61 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 116
- Pads
- 520
- Tracks, vias
- 1,017, 247
- Pours
- 38
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2025
- Updated
- 26 Jun 2026
Overview
BigCore is an open-source printed circuit board by Dschadu, from the Dschadu/Geistwerk-BigCore repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 61 × 100 mm with 152 parts on 116 nets, routed with 1,017 tracks and 247 vias.
It is built around the 74AHCT1G17GWH, ESP32-WROOM-32E and ST3485EBDR, with the RS485, AP63203WU and DM3AT-SF-PEJM5 among its other parts. Its parts include 40 resistors, 34 capacitors, 28 diodes, 21 connectors and 9 ICs. It belongs with the ESP32 boards of this library.
Main components
1274AHCT1G17GWH
TSSOP-5-1.3mm-40℃~+125℃ 1 1 4.5V~5.5V 4.6ns@5V,50pF 40uA 74AHCT 8mA 8mA Schmitt trigger Unidirectional TSSOP-5-1.3mm Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesST3485EBDR
SO-8-40℃~+85℃ 1 1 12Mbps 2.2mA 3V~3.6V 64 Half-Duplex Transceiver ±15kV SO-8 RS-485 / RS-422 ICs ROHSSTMicroelectronicsRS-485 / RS-422 ICsRS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICsAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersDM3AT-SF-PEJM5
SMD-25℃~+85℃ 1.68mm Connector and Ejector MicroSD Card (TF Card) No Push-Push SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card ConnectorAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)ESDS311DYFR
SOD-323UncategorisedTexas InstrumentsESDS314
4ch, 4.5pF Data-Line Surge and ESD Protection Diode ArrayTexas InstrumentsUncategorisedWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdESP32 Bottango Control Board
This custom PCB is designed to serve as a control and interface board for projects using the Bottango motion and animation control firmware.
It provides robust connectivity, servo control, and expandability for animatronics or motion-based systems.
Note: This is a community project and not designed / maintained / officially supported by Bottango.
Features
Core
- ESP32 microcontroller
- USB-C connector for power and programming
- Selectable power source for the ESP32:
- USB-C
- 5 V rail (from WS2812B)
Inputs
- 4 user buttons — freely assignable, e.g., for selecting animations
- 1 stop button — emergency or animation stop
- Potentiometer input — for audio volume control
Outputs & Indicators
- 4 status LEDs — indicate board or animation states
- Line-out audio output
- 6 servo connectors (powered by dedicated power input)
- WS2812B output — supports addressable RGB LEDs
- Selectable power source for audio section:
- USB-C
- 5 V rail (from WS2812B)
- LED power indicators for:
- 5 V
- 6 V
- USB-C
- 3.3 V
Connectivity
- I²C (Qwiic-compatible connector) — for sensor or peripheral expansion
- RS485 interface — for robust long-distance serial communication
Power Overview
| Function | Voltage | Source Options |
|---|---|---|
| ESP32 | 5 V | USB-C / 5 V line |
| Audio Output Circuit | 5 V | USB-C / 5 V line |
| WS2812B LEDs | 5 V | External supply |
| Servos | 6 V | External supply |
Firmware Compatibility
This board is designed for use with Bottango firmware, providing smooth integration with Bottango Studio for real-time motion and animation control.
Learn more at: https://www.bottango.com/
Note: This is a community project and not designed / maintained / officially supported by Bottango.
License
This hardware design is released under the
CERN Open Hardware Licence Version 2 – Weakly Reciprocal (CERN-OHL-W).
© 2025 Martin Klein
You are free to:
- Use, study, modify, and manufacture this design
- Distribute modified versions under the same license
- Incorporate this board into larger, closed-source systems, as long as modifications to this board itself remain open-source
For more information, see the LICENSE file or the full text at CERN-OHL-W
Copyright Notice
Copyright Martin Klein 2025.
This source describes Open Hardware and is licensed under the CERN-OHLW v2
You may redistribute and modify this PCB and make products using it under the terms of the CERN-OHL-W v2 (https:/cern.ch/cern-ohl). This PCB is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions.
Source location: https://github.com/Dschadu/Geistwerk-BigCore
As per CERN-OHL-W v2 section 4.1, should You produce hardware based on these sources, You must maintain the Source Location visible in its documentation.
Acknowledgments
Special thanks to the Bottango team for providing an intuitive open platform for animatronic motion control.
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C9, C10, C12, C13, C15, C17, C19, C25, C33, C34, C35, C36, C37, C38 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R20, R21, R36 |
| 8 | 33 | Resistor_SMD:R_0603_1608Metric | R26, R27, R28, R29, R30, R31, R34, R35 |
| 7 | 10µ | Capacitor_SMD:C_0603_1608Metric | C4, C11, C14, C16, C18, C20, C26 |
| 6 | 120 | Resistor_SMD:R_0603_1608Metric | R1, R12, R15, R16, R42, R43 |
| 6 | ESDS311DYFR | Diode_SMD:D_SOD-323_HandSoldering | D8, D9, D10, D12, D13, D21 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric | R2, R24, R25, R44, R45 |
| 4 | 470µ | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C3, C31, C32 |
| 4 | ESDS314 | Package_TO_SOT_SMD:SOT-23-5 | D5, D6, D18, D19 |
| 4 | Green | LED_SMD:LED_0805_2012Metric | D1, D4, D29, D30 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D25, D26, D27, D28 |
| 3 | TSD05DYFR | Diode_SMD:D_SOD-323_HandSoldering | D2, D23, D24 |
| 2 | 1.6k | Resistor_SMD:R_0603_1608Metric | R32, R33 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R10, R17 |
| 2 | 1µ | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 2.2n | Capacitor_SMD:C_0603_1608Metric | C21, C22 |
| 2 | 2.2µ | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 22µ | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 5,1k | Resistor_SMD:R_0603_1608Metric | R22, R23 |
| 2 | 74AHCT1G17 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U9, U10 |
| 2 | ESDS312 | Package_TO_SOT_SMD:SOT-23-5 | D7, D20 |
| 2 | SD08LCC | Diode_SMD:D_SOD-323_HandSoldering | D16, D17 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 1,15k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 2,2µ | Inductor_SMD:L_APV_ANR4020 | L1 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 4,99k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 5V In | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | 5V Selection Analog | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | 5V Selection Digital | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Boot | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW2 |
| 1 | Btn 0 | TestPoint:TestPoint_Pad_D1.5mm | J6 |
| 1 | Btn 0 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW3 |
| 1 | Btn 1 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW4 |
| 1 | Btn 1 | TestPoint:TestPoint_Pad_D1.5mm | J8 |
| 1 | Btn 2 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW5 |
| 1 | Btn 2 | TestPoint:TestPoint_Pad_D1.5mm | J9 |
| 1 | Btn 3 | TestPoint:TestPoint_Pad_D1.5mm | J10 |
| 1 | Btn 3 | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW6 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6 |
| 1 | DM3AT-SF-PEJM5 | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E | U3 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | J11 |
| 1 | I2C | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J20 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J3 |
| 1 | LOGO | Avatar:Avatar_12x12 | G*** |
| 1 | Line Out | Connector_Audio:Jack_3.5mm_CUI_SJ1-3524N_Horizontal | J13 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_5.7x6mm_SilkScreen | H5 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | RS485 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | RS485 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | RX | LED_SMD:LED_0805_2012Metric | D15 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | SMCJ13A | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | ST3485EBDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Servo 01 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | Servo 02 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Servo 03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | Servo 04 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17 |
| 1 | Servo 05 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | Servo 06 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J19 |
| 1 | TX | LED_SMD:LED_0805_2012Metric | D14 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J12 |
| 1 | Vdrive In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Volume | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | WS2812 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J22 |
Similar boards
- 2 layers40 × 42 mm

- 6 layers60.8 × 35.1 mm

- 2 layers

- 4 layers64 × 64 mm

Espion cam
azais-corentin/espion
Multi-camera IR marker tracking: ESP32-P4/C5 firmware, Rust host, KiCad hardware
188 partsApache-2.0 - 4 layers42 × 100 mm

Psu
xdylanm/modular-system-psu
A PSU for a modular Eurorack system, featuring +/-12V and 5V rails, USB-C input, and a regulated USB-A output.
68 partsMIT - 2 layers59.2 × 59.2 mm

Buffered IDE2CF adapter Rev 1
RetroNynjah/Buffered-IDE2CF-adapter
Buffered IDE2CF adapter for Amiga 1200, TF1260 and others
26 parts15GPL-3.0 - 2 layers100 × 102 mm

- 4 layers85.3 × 75.7 mm

Questions
How big is the BigCore PCB?
It measures 61 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BigCore use?
152 parts, built around the 74AHCT1G17GWH, ESP32-WROOM-32E, ST3485EBDR and RS485. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BigCore KiCad files?
From the Dschadu/Geistwerk-BigCore repository on GitHub, at the commit this page was made from: the board is BigCore.kicad_pcb and its schematic BigCore.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BigCore design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).