

Kicad files for our microcontroller pcb
- Size
- 80 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 13
- Pads
- 52
- Tracks, vias
- 99, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Oct 2021
- Updated
- 19 Dec 2021
Overview
Main PCB 1 is an open-source printed circuit board by vives-projectwerk-2021, from the vives-projectwerk-2021/Microcontroller_pcb repository on GitHub. It is a 2-layer board of 80 × 70 mm with 21 parts on 13 nets, routed with 99 tracks and 21 vias.
It is built around the LTR-329ALS-01 and S-1318B33-M5T1U4. Its parts include 3 capacitors, 2 resistors, 2 ICs, 2 fuses and 1 diode.
Main components
2LTR-329ALS-01
VDFN-4-30℃~+70℃ 16bit 2.4V~3.6V 64klx I2C Light Intensity VDFN-4 Ambient Light Sensors ROHSLite-OnAmbient Light SensorsS-1318B33-M5T1U4
SOT-23-5-40℃~+85℃@(Ta) 100mA 3.3V 5.5V Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSABLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMicrocontroller_pcb
Kicad files for our microcontroller pcb
Schematic
You can see the updated schematic of our main board in the picture below
Pictures
| Front | Back |
|---|---|
| In this picture you can see the front of the pcb | In this picture you can see the back of the pcb |
![]() | ![]() |
Components
- STM32L476RGT

- 32768 Crystal

- ESD Protection(USBLC6-2SC6)

- L432KC pin layout

- Cryptochip (ATTEC508A)

- Batteryholder(1013)

- LoraModule (RFM95W)

- Lichtsensor (LTR-329ALS)

- 2x Button switch SMD

- 18x 100nF (0603) condensatoren

- 2x 4pf (0603) Condensator bij crystal

- LED SMD (0805)

- 2x Fuse (0603)

- Temperaturesensor TCN75AVUA713-VAO

- EEPROM geheugen 24AA64T

- Connector Antenne SMA_Amphenol

- Connector voor moisture 2x03 2.54mm

- USB-C Connector 2.0 Type-c-31-m-12

- Connector voor batterij 1x03 2.54mm

- 2x Connector Molex 1x08 2.00mm

- SWD Programming port (20021521-00010T1LF)

- 2x LDO (PS1 S-1318B33-M5T1U4)

- 1x 4.7kΩ

- 2x 5.1kΩ

- 3x 360Ω

- 2x 100kΩ

- 1x 220kΩ

- 1x 330kΩ

Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | REF5, REF6, REF7, REF8 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C14, C15 |
| 2 | Fuse | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1, F2 |
| 1 | |||
| 1 | logo's:PULU_LOGO_10MM | ||
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1013 | 1013:1013 | U3 |
| 1 | 360R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | Conn_01x08 | Connector_Molex:Molex_Micro-Latch_53253-0870_1x08_P2.00mm_Vertical | J6 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | logo's:VIVES_LOGO_10MM | G*** |
| 1 | LTR-329ALS-01 | LTR-329ALS:LTR329ALS01 | U1 |
| 1 | S-1318B33-M5T1U4 | S-1318B33:SOT95P275X130-5N | PS1 |
The 19 most common of 21 parts.
More from vives-projectwerk-2021/Microcontroller_pcb
2- 4 layers178.5 × 70 mm

- 4 layers80 × 70 mm

Similar boards
- 2 layers31.8 × 36.8 mm

E INK Watch
DomenicHampson/EnkWatch
Custom designed e-ink smartwatch with 2 weeks of battery life. Displays time, date, battery health, altitude and weather data (note: I am still in the process of assembling the PCB and writing the firmware)
53 parts - 4 layers22.9 × 50.8 mm

- 4 layers118 × 118 mm

Eg node+boxco-1313
CodeClubTeam/ElectricGarden
The repositories folder includes all of the files and repos that were created as part of the Electric Garden Project. Some folders include depreciated code that was no longer used in the final stage of the product.
105 parts - 4 layers

Vibamix
CoolNamesAllTaken/vibamix
An interactive ePaper nametage for playing "will it blend" with arbitrary groups of people.
78 parts - 6 layers47 × 69.4 mm

- 4 layers35 × 35 mm

BTZ EndDevice
GoodByte-Hardware/BTZ-EndDevice
Low-power wireless sensor board based on the nRF54L15 for BLE Mesh, Thread/Matter and Zigbee
56 partsMIT - 4 layers25.1 × 17.8 mm

BOTTOM PCB
SaikoJuanma/phone_replacement
this projects aims to create a replacement for the phone, so I can stop using my phone on the home and get rid off distractions. ## Upcoming features 1. Timer and alarm. 2. PCB and schematics for the project. 3.
82 parts - 4 layers78 × 89 mm

Questions
How big is the Main PCB 1 PCB?
It measures 80 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main PCB 1 use?
21 parts, built around the LTR-329ALS-01 and S-1318B33-M5T1U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main PCB 1 KiCad files?
From the vives-projectwerk-2021/Microcontroller_pcb repository on GitHub, at the commit this page was made from: the board is Main_PCB_1.kicad_pcb and its schematic Main_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main PCB 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vives-projectwerk-2021 before reusing the design.

