

Kicad files for our microcontroller pcb
- Size
- 80 × 70 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 52
- Nets
- 92
- Pads
- 280
- Tracks, vias
- 807, 199
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Oct 2021
- Updated
- 19 Dec 2021
Overview
Main PCB 2 is an open-source printed circuit board by vives-projectwerk-2021, from the vives-projectwerk-2021/Microcontroller_pcb repository on GitHub. It is a 4-layer board of 80 × 70 mm with 52 parts on 92 nets, routed with 807 tracks and 199 vias.
It is built around the ATECC508A-SSHDA-T, 24LC64-I/SNG and RFM95W-868S2, with the USBLC6-2SC6, 20021521-00010T1LF and S-1318B33-M5T1U4 among its other parts. Its parts include 17 capacitors, 12 resistors, 7 ICs, 5 connectors and 2 switches. It belongs with the STM32 boards of this library.
Main components
6ATECC508A-SSHDA-T
SOIC-8SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)24LC64-I/SNG
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms 64Kbit I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMRFM95W-868S2
16-SMD16-SMD New Arrivals ROHSHopeRF Micro-electronicsUncategorisedUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)20021521-00010T1LF
SMD,P=1.27mm1.27mm 10P 2 Copper alloy Surface Mount,Vertical SMD,P=1.27mm Board-to-Board and Backplane Connector ROHSAmphenolBoard-To-Board And Backplane ConnectorS-1318B33-M5T1U4
SOT-23-5-40℃~+85℃@(Ta) 100mA 3.3V 5.5V Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSABLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMicrocontroller_pcb
Kicad files for our microcontroller pcb
Schematic
You can see the updated schematic of our main board in the picture below
Pictures
| Front | Back |
|---|---|
| In this picture you can see the front of the pcb | In this picture you can see the back of the pcb |
![]() | ![]() |
Components
- STM32L476RGT

- 32768 Crystal

- ESD Protection(USBLC6-2SC6)

- L432KC pin layout

- Cryptochip (ATTEC508A)

- Batteryholder(1013)

- LoraModule (RFM95W)

- Lichtsensor (LTR-329ALS)

- 2x Button switch SMD

- 18x 100nF (0603) condensatoren

- 2x 4pf (0603) Condensator bij crystal

- LED SMD (0805)

- 2x Fuse (0603)

- Temperaturesensor TCN75AVUA713-VAO

- EEPROM geheugen 24AA64T

- Connector Antenne SMA_Amphenol

- Connector voor moisture 2x03 2.54mm

- USB-C Connector 2.0 Type-c-31-m-12

- Connector voor batterij 1x03 2.54mm

- 2x Connector Molex 1x08 2.00mm

- SWD Programming port (20021521-00010T1LF)

- 2x LDO (PS1 S-1318B33-M5T1U4)

- 1x 4.7kΩ

- 2x 5.1kΩ

- 3x 360Ω

- 2x 100kΩ

- 1x 220kΩ

- 1x 330kΩ

Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C6, C8, C9, C10, C11, C12, C16 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C13, C17, C18, C19, C20 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | REF1, REF2, REF3, REF4 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R11, R14 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 360R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 4pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 20021521-00010T1LF | 20021521-00010T1LF:20021521-00010T1LF | JP1 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 24LC64-I_SN | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | 32.768 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | ATECC508A-SSHDA-T | ATECC508A:ATECC508A-SSHDA-T | U5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08 | Connector_Molex:Molex_Micro-Latch_53253-0870_1x08_P2.00mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1 |
| 1 | RFM95W-868S2 | RFM95W-868S2:XCVR_RFM95W-868S2 | U2 |
| 1 | S-1318B33-M5T1U4 | S-1318B33:SOT95P275X130-5N | PS2 |
| 1 | ST-Nucleo-L432KC | Module:ST-Nucleo-L432KC | U6 |
| 1 | STM32L476RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | TCN75AVUA713-VAO | TCN75AVUA713-VAO:SOP65P490X110-8N | IC1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
The 50 most common of 52 parts.
More from vives-projectwerk-2021/Microcontroller_pcb
2- 4 layers178.5 × 70 mm

- 2 layers80 × 70 mm

Similar boards
- 2 layers31.8 × 36.8 mm

E INK Watch
DomenicHampson/EnkWatch
Custom designed e-ink smartwatch with 2 weeks of battery life. Displays time, date, battery health, altitude and weather data (note: I am still in the process of assembling the PCB and writing the firmware)
53 parts - 4 layers33.5 × 66.8 mm

Net bmp
elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)
97 parts3GPL-3.0 - 4 layers45 × 98 mm

Ofc v3
rland93/ollyfc
A small rust-embedded flight computer. RTIC, FrSky protocols, and STM32F4 hardware.
151 parts3MPL-2.0 - 6 layers250 × 167.9 mm

- 2 layers20 × 38.1 mm

Debug Adapter
PicoballoonLabs/Debug-Boards
Hardware designs for the integrated debug probe, debug adapter, flex debug cables and RF VNA calibrator
34 parts1MIT - 4 layers90.6 × 58.1 mm

EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
179 parts4GPL-3.0 - 4 layers73 × 98 mm

ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT - 4 layers60 × 120 mm

Theoros
Majorwhiskey/gps-lora
Theoros is a USB-C GPS logger and LoRa tracker built on the ESP32-S3. It logs 1 Hz u-blox M10 fixes to microSD, shows status on an OLED and sends AES-128-CCM encrypted position over 868 MHz LoRa.
88 partsCERN-OHL-P-2.0
Questions
How big is the Main PCB 2 PCB?
It measures 80 × 70 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Main PCB 2 use?
52 parts, built around the ATECC508A-SSHDA-T, 24LC64-I/SNG, RFM95W-868S2 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main PCB 2 KiCad files?
From the vives-projectwerk-2021/Microcontroller_pcb repository on GitHub, at the commit this page was made from: the board is Main_PCB_2.kicad_pcb and its schematic Main_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main PCB 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vives-projectwerk-2021 before reusing the design.

