
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A 60% keyboard
Pineapple is an open-source printed circuit board by vivaanchauhan78, from the vivaanchauhan78/Pineapple repository on GitHub. It is a 2-layer board of 336.7 × 100.1 mm with 136 parts on 113 nets, routed with 566 tracks and 38 vias.
It is built around the SK6812MINI-E. Its parts include 68 diodes, 67 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A not-so-small 60% keyboard that I made!
I have a mouse on my other setup up but I didn't have a keyboard, so I thought of making one!
| Item | Cost | Link |
|---|---|---|
| Rpp2040 | $3.46 | Buy on aliexpress |
| Switches | $19.65 | Buy on AliExpress |
| PCB | $30.44 | Buy on Pcbway |
| Stabilizers | $4.11 | Buy on aliexpress |
| Fasteners | $14.00 | Buy on eBay |
| Diodes | $1.64 | Buy on AliExpress |
| Keycaps | $26.51 | Buy on Amazon |
| Case | $4.74 | |
| Total | 104.55 |
Pictures:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 67 | D | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +51 |
| 54 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW10, SW11, SW12, SW13, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +38 |
| 6 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | SW29, SW59, SW60, SW61, SW63, SW64 |
| 3 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | SW14, SW31, SW56 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | SW43, SW45 |
| 1 | Raspberry_Pi_Pico | ScottoKeebs_MCU:Raspberry_Pi_Pico | U1 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D68 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.50u_PCB | SW16 |
| 1 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_6.25u_PCB | SW62 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 336.7 × 100.1 mm and has 2 copper layers, 1.6 mm thick.
136 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vivaanchauhan78/Pineapple repository on GitHub, at the commit this page was made from: the board is Pineapple.kicad_pcb and its schematic Pineapple.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vivaanchauhan78 before reusing the design.