

ATTN unit
A smart desk companion that tracks your focus using sound, motion, and time. It gives real-time feedback, builds study streaks, and adapts to your habits to help you stay locked in. Stay focused. It’s watching.
- Size
- 85.3 × 68.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 38
- Pads
- 58
- Tracks, vias
- 77, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 May 2026
- Updated
- 27 Jun 2026
Overview
ATTN unit is an open-source printed circuit board by vineethjkatti-tech, from the vineethjkatti-tech/ATTN_unit repository on GitHub. It is a 2-layer board of 85.3 × 68.8 mm with 4 parts on 38 nets, routed with 77 tracks and 0 vias.
It is built around the ESP32-DEVKITC-32E, HLK-LD2410C and SPH0645LM4H-B. Its parts include 2 ICs and 1 connector. It belongs with the ESP32 boards of this library.
Main components
3Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32E | Custom Boards:ESP32 | U4 |
| 1 | HLK-LD2410C | Custom Boards:MODULE_HLK-LD2410C | U2 |
| 1 | SPH0645LM4H | Sensor_Audio:Knowles_SPH0645LM4H-6_3.5x2.65mm | MK1 |
| 1 | Screen Connector | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers56.4 × 78.4 mm

- 2 layers55 × 32 mm

HA Sensor Node
AlexD717/HA-Sensor-Node
Sensor node featuring a temperature, humidity, and mmWave sensor
15 parts1 - 2 layers155.1 × 122 mm

KiCad Main
mgiesen/Magic-Tabmount
Der "Magic Tabmount" ist eine smarte Wandhalterung für das iPad (Generation 5 bis 9). Durch ein integriertes Magnetsystem kann das iPad mit einem Handgriff an der Wand befestigt oder wieder entfernt werden.
55 parts1 - 2 layers94.6 × 120.6 mm

- 2 layers56 × 75 mm

- 2 layers142.2 × 106.7 mm

SwitchFoil
falue/rebekkaSwitchFoil
This repo is using a HLK-LD2450 microwave human presence sensor and a Sparkfun Thing Plus. This uses Micropython. See below for instructions to set it up.
31 parts - 2 layers

C3 radar r45
haxeko/presence-pcb
Phiên bản Ø45 của cảm biến hiện diện. ESP32-C3 và radar đặt cạnh nhau, không xếp chồng, để tối ưu sóng WiFi và tản nhiệt. Mạch điện giữ nguyên bản Ø30: USB-C chỉ lấy nguồn 5 V, LDO AP2112K-3.3, pad nạp, nút RESET.
30 parts - 2 layers50 × 50 mm

Questions
How big is the ATTN unit PCB?
It measures 85.3 × 68.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATTN unit use?
4 parts, built around the ESP32-DEVKITC-32E, HLK-LD2410C and SPH0645LM4H-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATTN unit KiCad files?
From the vineethjkatti-tech/ATTN_unit repository on GitHub, at the commit this page was made from: the board is KICAD/ATTN_unit.kicad_pcb and its schematic KICAD/ATTN_unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATTN unit design in my own project?
Its repository states no licence, so its author keeps all rights: ask vineethjkatti-tech before reusing the design.