
DEV G2-NANO
theta-machines/DEV-G2-NANO
The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

Tiramisu is an open-source printed circuit board by vgskye, from the vgskye/tiramisu repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 24 × 32 mm with 26 parts on 68 nets, routed with 161 tracks and 60 vias.
It is built around the MDBT50Q-1MV2 and LSM6DSV. Its parts include 7 capacitors, 6 resistors, 3 ICs, 3 diodes and 2 connectors. It belongs with the nRF52 and nRF5x boards of this library.
SlimeVR-like full-body trackers using nRF52840 and LSM6DSV.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10 uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C7 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5 |
| 3 | MountingHole | adhoc:MountingHole_1.7mm_M1.6 | H1, H2, H3 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Battery_Cell | adhoc:Molex_Pico-EZmate_78171-0002_1x02-1MP_P1.20mm_Vertical | BT1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric | D3 |
| 1 | D_TVS | Diode_SMD:D_0603_1608Metric | D2 |
| 1 | D_TVS_Dual_AAC | adhoc:SOT-23_AltChevron | D1 |
| 1 | LSM6DSV | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MDBT50Q-1MV2 | RF_Module:Raytac_MDBT50Q | U1 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | adhoc:USB_C_Receptacle_JAE_DX07S016JA1R1500_alt | J2 |

theta-machines/DEV-G2-NANO
The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU



sigmondkukla/lmp91000
This repository contains the C++ firmware for the custom potentiostat platform (featuring an LMP91000 analog front end, EFR32BG24 MCU, and an LSM6DSV IMU) alongside a Python-based real-time wireless BLE debugging client.

1hira-c/fitra-aaa
Raytac AN54LQ-15(nRF54L15)搭載の SlimeVR(Smol Slime)トラッカー基板 / KiCad 設計


It measures 24 × 32 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the MDBT50Q-1MV2 and LSM6DSV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vgskye/tiramisu repository on GitHub, at the commit this page was made from: the board is Tiramisu.kicad_pcb and its schematic Tiramisu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).