

- Size
- 72 × 97 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 49
- Pads
- 163
- Tracks, vias
- 248, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jun 2024
- Updated
- 31 Jul 2024
Overview
IOTV is an open-source printed circuit board by verbkinm, from the verbkinm/IOTV_PCB repository on GitHub. It is a 2-layer board of 72 × 97 mm with 47 parts on 49 nets, routed with 248 tracks and 16 vias.
It is built around the HLK-5M05, AMS1117-3.3 and S8050. Its parts include 8 capacitors, 7 connectors, 6 resistors, 5 switches and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
3HLK-5M05
DIP,38x23mm0.1W 18mm 1A 23mm 38mm 3kV 50mVp-p 5V 5W 70% 70V~350V 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdIOTV_PCB
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C_Generic | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4 |
| 4 | LED | PCM_Diode_SMD_Handsoldering_AKL:D_0603_1608Metric | D1, D2, D3, D4 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J2, J3, J4 |
| 3 | 100 | Resistor_SMD:R_1206_3216Metric | R3, R4, R5 |
| 3 | 2 | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F2, F3, F4 |
| 3 | G3MB202PDC12 | g3mb-202:RELAY_G3MB202PDC12 | K1, K2, K3 |
| 3 | PINHD_1x2_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7 |
| 3 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 10uF_0805_25V | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J_I2C1, J_UART1 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1A | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 5K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | C_Generic | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C8 |
| 1 | C_Generic | Capacitor_THT:C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C7 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U1 |
| 1 | Filter_EMI_LL | PCM_Inductor_THT_AKL:L_CommonMode_Toroid_Vertical_10x13mm | FL1 |
| 1 | HLK-5M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | LOGO | Symbol:logo_10x10 | G*** |
| 1 | RST | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Varistor | Varistor:RV_Disc_D21.5mm_W4.8mm_P10mm | RVe1 |
The 45 most common of 47 parts.
More from verbkinm/IOTV_PCB
3Similar boards
- 2 layers100 × 100 mm

- 2 layers125 × 100 mm

ESP Edgedevice
sarinsanyal/pcb-shems
This Smart Edge Node is an industrial/home energy monitoring and switching board that bridges high-voltage AC mains power with low-voltage microcontroller logic.
68 parts - 4 layers100 × 80 mm

Plc board
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
62 parts5CERN-OHL-W-2.0 - 2 layers68.6 × 48.6 mm

Stm32 esp iot
Kikkiu17/espiot
A small board built to measure current and voltage of any appliance.
55 parts2 - 2 layers

BathGuardian
lorinczstefanmihai/BathGuardian
An ESP32-powered monitoring & automation system for humidity, gas levels, temperature, and bathroom safety.
38 parts1 - 4 layers119.2 × 85 mm

- 2 layers160 × 110 mm

Pumpengruppe rs485
freezweb/de.freezweb.heizungssteuerung
Dieses Verzeichnis enthaelt den KiCad-Startentwurf fuer die dezentrale Pumpengruppen-Platine:
123 parts - 2 layers93.5 × 119.2 mm

Takehomelab
IsaacEmmanuelGudinoJacobo/TAKEHOMELAB_ESP32
Plataforma de hardware educacional (Take-Home Lab) para el modelado y control PID de sistemas físicos. Diseño de PCB en KiCad para ESP32-S3, integrando control de motor DC, sensor de luz (LDR) y módulo de conmutación.
34 parts
Questions
How big is the IOTV PCB?
It measures 72 × 97 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IOTV use?
47 parts, built around the HLK-5M05, AMS1117-3.3 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IOTV KiCad files?
From the verbkinm/IOTV_PCB repository on GitHub, at the commit this page was made from: the board is IOTV_id1/1.0/IOTV.kicad_pcb and its schematic IOTV_id1/1.0/IOTV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IOTV design in my own project?
Its repository states no licence, so its author keeps all rights: ask verbkinm before reusing the design.

