

CONTROLADOR ESP32
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 127
- Pads
- 367
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Jan 2026
- Updated
- 29 Jan 2026
Overview
CONTROLADOR ESP32 is an open-source printed circuit board by SamyuMT, from the SamyuMT/proyectosKicad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 82 parts on 127 nets.
It is built around the ESP32-S3-WROOM-1-N8, BTA16-600B and HLK-5M05, with the MOC3021M, DS3231MZ+ and ULN2003 among its other parts. Its parts include 21 resistors, 13 capacitors, 10 connectors, 9 diodes and 8 ICs. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBTA16-600B
TO-220A-40℃~+125℃ 1 TRIAC 1.5V 160A@20ms 16A 1V 500mW 50mA 600V 60mA TO-220A Thyristors (SCR)/Modules ROHSKTPThyristors (SCR)/ModulesHLK-5M05
DIP,38x23mm0.1W 18mm 1A 23mm 38mm 3kV 50mVp-p 5V 5W 70% 70V~350V 85VAC~264VAC AC/DC-DC Short Circuit Protection、Over Current Protection ±0.2% DIP,38x23mm AC-DC Power Modules ROHSHI-LINKAC-DC Power ModulesMOC3021M
DIP-6-40℃~+85℃ 0.1mA 1 1.15V 100mA 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output OptoisolatorsDS3231MZ+
SOIC-8-40℃~+85℃ 2.3V~5.5V I2C Temperature compensation、Backup power management and battery charging、Alarm function、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor ArraysS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D9 |
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8, C10, C11, C12, C13 |
| 7 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J3, J4, J5, J6, J7, J8, J9 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R6, R8, R9, R11, R12 |
| 6 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | BOOT1, RESET1, SW3, SW4, SW5, SW6 |
| 5 | 330 | Resistor_SMD:R_0805_2012Metric | R14, R15, R16, R17, R21 |
| 4 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2, K3, K4 |
| 3 | 470 | Resistor_SMD:R_2512_6332Metric | R7, R10, R13 |
| 3 | BTA16-600B | Package_TO_SOT_THT:TO-220-3_Vertical | Q3, Q4, Q5 |
| 3 | MOC3021M | Package_DIP:DIP-6_W7.62mm | U4, U5, U6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R18, R20 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1N47xxA | Diode_SMD:D_SMA | D8 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | AC IN | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J11 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U8 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U3 |
| 1 | HLK-5M05 | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-5Mxx | PS1 |
| 1 | ULN2003 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
The 78 most common of 82 parts.
More from SamyuMT/proyectosKicad
1- 2 layers33.5 × 24.5 mm

Similar boards
- 2 layers107 × 62 mm

- 2 layers105 × 58 mm

ZAP-010A
lalithk06/Esp32_Smart_Plug
Hardware reference design for an ESP32-S3 smart plug with mains power conversion, relay switching, RTC support, USB connectivity, and protection components.
80 parts - 2 layers105 × 58 mm

ZAP-01A
ponrajleo/AI-Hardware-ESP32S3-
This project is part of a complete open-source hardware design course on YouTube:
103 parts - 2 layers105 × 58 mm

ViRa V1.0
VikramR3/ViRa_Ai_plug
ESP32-S3 mains smart plug: HLK-5M05 isolated supply, SRD-05VDC relay, DS3231M RTC. 2-layer KiCad design.
80 partsMIT - 2 layers127.9 × 89.4 mm

Controller BanMarie
Shivansh21git/Controller-BanMarie
This projects includes PCB design for a Hot BanMarie Controller which can be used to controll upto 3 Heater/ Flurocent loads upto 5kw each.
68 parts - 2 layers64.3 × 63 mm

Triac AC Dimmer 1P
Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.
28 parts5GPL-3.0 - 2 layers54 × 76.8 mm

- 2 layers100 × 60 mm

Hotplate soldering
Arnaud-Apu-Fanovard/Hotplate-soldering
Hotplate soldering for PCB SMD componants for diyPCB
46 parts
Questions
How big is the CONTROLADOR ESP32 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CONTROLADOR ESP32 use?
82 parts, built around the ESP32-S3-WROOM-1-N8, BTA16-600B, HLK-5M05 and MOC3021M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CONTROLADOR ESP32 KiCad files?
From the SamyuMT/proyectosKicad repository on GitHub, at the commit this page was made from: the board is ESP32/CONTROLADOR-ESP32/CONTROLADOR-ESP32.kicad_pcb and its schematic ESP32/CONTROLADOR-ESP32/CONTROLADOR-ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CONTROLADOR ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask SamyuMT before reusing the design.