Skip to the content
2 layers34.2 × 61.6 mmRapid Remote, the printed circuit board in 3D

I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

Size
34.2 × 61.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
47
Pads
194
Tracks, vias
198, 20
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Jun 2023
Updated
9 Sep 2024

Overview

Rapid Remote is an open-source printed circuit board by venablesshooting, from the venablesshooting/Rapid-Training-Target repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 34.2 × 61.6 mm with 41 parts on 47 nets, routed with 198 tracks and 20 vias.

It is built around the ESP32-C3-MINI-1, MIC5504-3.3YM5 and WS4518D-6/TR, with the 1N4148WT among its other parts. Its parts include 15 resistors, 8 capacitors, 5 diodes, 5 switches and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

4

README

README.md

Rapid-Training-Target

This is a project I started in response to the need to train 25m olympic Rapid Fire Men at home. It is a box that is configured to work from a 5v power source, i.e usb wall charger or usb power bank, and is controlled via a lipo powered remote. It is currently configured for the 8s, 6s, and 4s series with a button for each, allowing for easy series switching while training. I plan to make a version for 25m Pistol and P3 Paralympic events.

I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and send data packet before returning to a ~3uA sleep state.

I strongly believe in OpenSource and have left the current state of code and hardware uploaded for others to use and modify but if you would like to purchase one, please use my Etsy https://www.etsy.com/uk/listing/1743482885/rapid-fire-training-box .

Parts

41
QtyValueFootprintReferences
710kResistor_SMD:R_0603_1608MetricR7, R8, R11, R12, R13, R15, R16
71uCapacitor_SMD:C_0603_1608MetricC1, C2, C5, C6, C7, C8, C9
5BUTTON_4PIN_TS_1177rapidtraining:TS-1177-C-B-Bs1, s2, s4, s6, s8
41N4148WTDiode_SMD:D_SOD-523D1, D2, D3, D4
41kResistor_SMD:R_0603_1608MetricR2, R6, R10, R14
3MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3
25k1Resistor_SMD:R_0603_1608MetricR4, R5
110uCapacitor_SMD:C_0603_1608MetricC4
11MResistor_SMD:R_0603_1608MetricR9
15kResistor_SMD:R_0603_1608MetricR3
1Conn_01x02_SocketConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1ESP32-C3-MINI-1PCM_Espressif:ESP32-C3-MINI-1U5
1LEDLED_SMD:LED_0603_1608MetricD5
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U1
1USB-C-16P-F(A40-00119-A52-12)Personal:USB2.0_TYPE-C(A40-00119-A52-12)USB-C1
1WS4518DPackage_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU3

More from venablesshooting/Rapid-Training-Target

6
  • 2 layers34.2 × 61.6 mmSport Remote, the printed circuit board in 3D

    Sport Remote

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    34 partsGPL-3.0
  • 2 layers34.2 × 56.1 mmRapid Remote, the printed circuit board in 3D

    Rapid Remote

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    27 partsGPL-3.0
  • 2 layers207.5 × 22 mmRapid Training Target, the printed circuit board in 3D

    Rapid Training Target

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    23 partsGPL-3.0
  • 2 layers207.5 × 22 mmRapid Training Target, the printed circuit board in 3D

    Rapid Training Target

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    18 partsGPL-3.0
  • 2 layers190 × 28.3 mmRapid Training Target, the printed circuit board in 3D

    Rapid Training Target

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    15 partsGPL-3.0
  • 2 layers27.9 × 38.1 mmRapid Remote, the printed circuit board in 3D

    Rapid Remote

    venablesshooting/Rapid-Training-Target

    I have utilised the ESPNOW protocol to communicate over the 2.4GHz spectrum between remote and training box. The remote uses a low power latching circuit which enables a button push to turn on, intilise connection, and…

    4 partsGPL-3.0

Similar boards

  • 2 layers70 × 71 mmJewelled lc1, the printed circuit board in 3D

    Jewelled lc1

    matthiasnowak/jewelled

    This is a panel meant for production of the Earrings, allowing for 2 Earrings per panel.

    148 parts3
  • 2 layers20.3 × 50.4 mmCh32v003f4u6 pendant, the printed circuit board in 3D

    Ch32v003f4u6 pendant

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    57 parts114
  • 4 layers98 × 48 mmEsphome pressure, the printed circuit board in 3D

    Esphome pressure

    gcormier/esphome-pressure

    esphome board with a differential pressure sensor, supporting a variety of power sources

    51 parts102
  • 4 layers81.7 × 31.8 mmEsp32c3 fpga, the printed circuit board in 3D

    Esp32c3 fpga

    ICE-V-Wireless/ICE-V-Wireless

    Combined ESP32C3 and iCE40 FPGA board

    94 parts82MIT
  • 4 layers83 × 83 mmBlinkekatze, the printed circuit board in 3D

    Blinkekatze

    TobleMiner/blinkekatze

    Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

    134 parts34
  • 4 layers50 × 31 mmSapphire captain, the printed circuit board in 3D

    Sapphire captain

    gregdavill/daikin-esp

    ESP32-C3 hardware to connect to a Daikin ducted A/C system. enabling WiFi control in Home Assistant.

    77 parts29
  • 2 layers27.5 × 32 mmFunHomeSwitch, the printed circuit board in 3D

    FunHomeSwitch

    ZhiFun/FunHome

    DIY design of smart home hardware based on Home Assistant.

    41 parts29MIT

Questions

How big is the Rapid Remote PCB?

It measures 34.2 × 61.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rapid Remote use?

41 parts, built around the ESP32-C3-MINI-1, MIC5504-3.3YM5, WS4518D-6/TR and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rapid Remote KiCad files?

From the venablesshooting/Rapid-Training-Target repository on GitHub, at the commit this page was made from: the board is Hardware/Rapid Remote/Rapid_Remote.kicad_pcb and its schematic Hardware/Rapid Remote/Rapid_Remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rapid Remote design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).