

AnalogDrumMachine
Capstone Project @ UNL, 2020-2021
- Size
- 149.9 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 120
- Pads
- 453
- Tracks, vias
- 1,676, 186
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Aug 2021
- Updated
- 11 May 2022
Overview
AnalogDrumMachine is an open-source printed circuit board by VegaDeftwing, from the VegaDeftwing/AnalogDrumMachine repository on GitHub. It is a 2-layer board of 149.9 × 48.3 mm with 95 parts on 120 nets, routed with 1,676 tracks and 186 vias.
It is built around the RP2040, TL072 and W25Q32JVSSIQ. Its parts include 51 resistors, 20 connectors, 11 capacitors, 6 diodes and 5 ICs. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdAnalogDrumMachine
Capstone Project @ UNL, 2020-2021
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 37 | R | Resistor_SMD:R_0805_2012Metric | R1, R10, R13, R14, R15, R16, R17, R20, R21, R22, R23, R24, R25, R26, R27, R28 +21 |
| 7 | 1K | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R48, R49 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C6, C8, C10 |
| 6 | Conn_02x12 | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J5, J6, J12, J13, J18, J19 |
| 5 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7, J8, J9, J10, J11 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J15, J16, J17 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R19, R47, R50 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C9, C11 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R51 |
| 1 | 12Mhz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 5.6K | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | Conn_01x04 | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_4-G_1x04_P7.50mm_Horizontal | J20 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J4 |
| 1 | D_Schottky | Diode_SMD:D_1206_3216Metric | D6 |
| 1 | RP2040 | RP2040:RP2040 | U4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | TL072 | Package_SO:SO-8_5.3x6.2mm_P1.27mm | U3 |
| 1 | TL074 | Package_SO:SO-14_5.3x10.2mm_P1.27mm | U1 |
| 1 | USB_A | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
More from VegaDeftwing/AnalogDrumMachine
8- 2 layers94.8 × 35.3 mm

- 2 layers80 × 41.9 mm

- 2 layers76.2 × 41.9 mm

- 2 layers57.8 × 37.5 mm

- 2 layers59.7 × 32.4 mm

- 2 layers10.2 × 116 mm

- 2 layers38.7 × 39.4 mm

- 2 layers10 × 17.5 mm

Similar boards
- 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers78 × 60 mm

- 4 layers22.9 × 61 mm

- 4 layers59.8 × 41.1 mm

SmartPowerBoard
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
117 parts192MIT - 2 layers30 × 16 mm

- 2 layers120 × 60 mm

Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers76.2 × 69.9 mm

Startrckr pcb
NikodemBartnik/StarTrckr
Open source star tracker for deep sky astrophotography
59 parts98 - 4 layers65 × 100 mm

Questions
How big is the AnalogDrumMachine PCB?
It measures 149.9 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AnalogDrumMachine use?
95 parts, built around the RP2040, TL072 and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AnalogDrumMachine KiCad files?
From the VegaDeftwing/AnalogDrumMachine repository on GitHub, at the commit this page was made from: the board is PCBs/rev1/rev1.kicad_pcb and its schematic PCBs/GreenRinger/GreenRinger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AnalogDrumMachine design in my own project?
Its repository states no licence, so its author keeps all rights: ask VegaDeftwing before reusing the design.