Skip to the content
2 layers151.1 × 176.3 mmLine follower, the printed circuit board in 3D
Size
151.1 × 176.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
110
Nets
77
Pads
328
Tracks, vias
786, 253
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2025
Updated
25 Jun 2025

Overview

Line follower is an open-source printed circuit board by veenaviswanathan5, from the veenaviswanathan5/RM_line_follower repository on GitHub. It is a 2-layer board of 151.1 × 176.3 mm with 110 parts on 77 nets, routed with 786 tracks and 253 vias.

It is built around the AMS1117-3.3, RPR-220 and XT60-M. Its parts include 34 resistors, 23 capacitors, 14 diodes, 13 connectors and 4 switches.

Main components

3

README

README.md

README FILE FOR THE REPO

Parts

110
QtyValueFootprintReferences
210.1uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +5
14LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14
13150Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32
9220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4, R5, R6, R7, R8, R9, R10
947kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR11, R12, R13, R14, R15, R16, R17, R18, R19
9RPR-220RPR-220:PHODET_RPR-220A1, A2, A3, A4, A5, A6, A7, A8, A9
6MountingHole_2.1mmMountingHole:MountingHole_2.1mm5, 6, 7, 8, 9, 10
4Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ6, J7, J9, J12
3Conn_01x06_SocketConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3, J4, J8
3SW_Push_DPDTButton_Switch_THT:SW_Push_2P2T_Toggle_CK_PVA2xxH3xxxxxxV2SW1, SW3, SW4
210kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR33, R34
222ufCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_HandSolderC22, C23
2Conn_01x20_PinConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ10, J11
2Conn_01x20_SocketConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1LOGORobo Logo:robo_logo.prettyG***
1PolyfuseResistor_SMD:R_1812_4532Metric_Pad1.30x3.40mm_HandSolderF1
1RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW5
1XT60-MConnector_AMASS:AMASS_XT60-M_1x02_P7.20mm_VerticalJ5

The 106 most common of 110 parts.

Similar boards

  • 2 layers130.1 × 169.3 mmLine follower, the printed circuit board in 3D

    Line follower

    purseeee/FLF_PCB_2025

    83 parts
  • 2 layers22.5 × 62 mmESP32-S3-IR, the printed circuit board in 3D

    ESP32-S3-IR

    thetrung/ESP32-S3-IR

    ESP32-S3 with IR Sensor to determine distance.

    18 parts
  • 2 layers90 × 40 mmSensorcircuit, the printed circuit board in 3D

    Sensorcircuit

    kbcola/linetracer_D4_8

    KCCT-D4 ライントレーサー実験

    38 parts
  • 2 layers99.6 × 77 mmThylaThylakoid Hardware, the printed circuit board in 3D

    ThylaThylakoid Hardware

    koki0517/ThylaThylakoid-Hardware

    基盤をつくるんだ()

    53 partsApache-2.0
  • 2 layers30 × 15 mmTachoSensor, the printed circuit board in 3D

    TachoSensor

    Numata-wasa/Tachometer

    8 partsMIT
  • 4 layers65.8 × 77.2 mmVtx scanner pcb, the printed circuit board in 3D

    Vtx scanner pcb

    deets/deets-fpv-vtx-scanner

    39 parts5
  • 2 layers151.3 × 122.6 mmRemote v2, the printed circuit board in 3D

    Remote v2

    KIIT-Robotic-Society/Dharma_RoboFest4.0

    Dharma Bot is a quadruped robotic dog featuring 12-DOF locomotion, real-time sensing, and a modular subsystem design.

    135 parts4MIT
  • 2 layers71.8 × 48.5 mmJOLT V1, the printed circuit board in 3D

    JOLT V1

    GoTouchGra55/J.O.L.T

    12 degrees of freedom, 1 custom devboard, and 0 off-the-shelf solutions. JOLT is a quadruped robot built entirely from scratch.

    73 parts1MIT

Questions

How big is the Line follower PCB?

It measures 151.1 × 176.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Line follower use?

110 parts, built around the AMS1117-3.3, RPR-220 and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Line follower KiCad files?

From the veenaviswanathan5/RM_line_follower repository on GitHub, at the commit this page was made from: the board is line_follower.kicad_pcb and its schematic line_follower.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Line follower design in my own project?

Its repository states no licence, so its author keeps all rights: ask veenaviswanathan5 before reusing the design.