

ESP32-S3-IR
ESP32-S3 with IR Sensor to determine distance.
- Size
- 22.5 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 23
- Pads
- 58
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 May 2025
- Updated
- 11 Jun 2025
Overview
ESP32-S3-IR is an open-source printed circuit board by thetrung, from the thetrung/ESP32-S3-IR repository on GitHub. It is a 2-layer board of 22.5 × 62 mm with 18 parts on 23 nets.
It is built around the TS-1101-C-W, RC0603FR-51KL and RC0603FR-220RL, with the RC0603FR-10KL, MMBT2222A and RPR-220 among its other parts. Its parts include 7 connectors, 6 resistors, 3 switches and 1 transistor. It belongs with the ESP32 boards of this library.
Main components
6TS-1101-C-W
SMD,6x3.6mm-30℃~+85℃ 12V 2.5mm 2.6N 3.6mm 50,000 cycles 50mA 6mm No Rectangular Button SPST Surface Mount,Vertical Without Bracket SMD,6x3.6mm Tactile Switches ROHSXKB ConnectionTactile SwitchesRC0603FR-51KL
0603-55℃~+155℃ 100mW 51kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRC0603FR-220RL
0603-55℃~+155℃ 100mW 220Ω 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRC0603FR-10KL
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)RPR-220
插件0.1V 1.34V 30mA 6mm 940nm Phototransistor 插件 Reflective Optical Interrupters ROHSROHM SemiconductorReflective Optical Interrupters
README
README.mdESP32-S3 IR Sensor
Just an ESP32-S3 with IR Sensor, some buttons for modes, OLED 128x32 to show info.
1. Layout



2. Schematic

Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | C318938 | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 68K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | BAT | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J5 |
| 1 | BUZZER_5V | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J6 |
| 1 | BUZZER_GND | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7 |
| 1 | C107231 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | C107696 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | C98220 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ESP32_Left | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | ESP32_Right | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PWR | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | RPR-220 | Sensor_Distance:PHODET_RPR-220 | A1 |
Similar boards
- 4 layers40.3 × 68.8 mm

- 2 layers130.1 × 169.3 mm

- 2 layers151.1 × 176.3 mm

- 2 layers90 × 40 mm

- 2 layers99.6 × 77 mm

- 2 layers30 × 15 mm

- 4 layers46.5 × 40 mm

- 4 layers118 × 117 mm

Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81
Questions
How big is the ESP32-S3-IR PCB?
It measures 22.5 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-S3-IR use?
18 parts, built around the TS-1101-C-W, RC0603FR-51KL, RC0603FR-220RL and RC0603FR-10KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-S3-IR KiCad files?
From the thetrung/ESP32-S3-IR repository on GitHub, at the commit this page was made from: the board is ESP32S3_IR.kicad_pcb and its schematic ESP32S3_IR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-S3-IR design in my own project?
Its repository states no licence, so its author keeps all rights: ask thetrung before reusing the design.