

Module
Open Hardware SBC with Allwinner D1 RISC-V CPU and 512MB DDR3 RAM
- Size
- 60 × 118 mm
- Copper layers
- 4
- Thickness
- 2.02 mm
- Parts
- 153
- Nets
- 333
- Pads
- 976
- Tracks, vias
- 995, 228
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Dec 2021
- Updated
- 29 Dec 2025
Overview
Module is an open-source printed circuit board by vd-rd, from the vd-rd/sbc_allwinner_D1 repository on GitHub. It is a 4-layer board of 60 × 118 mm with 153 parts on 333 nets, routed with 995 tracks and 228 vias.
It is built around the AP6255, AP2281-1WG and AP9211, with the AXP173 and USBLC6-2P6 among its other parts. Its parts include 75 capacitors, 30 resistors, 10 ICs, 9 diodes and 6 connectors.
Main components
5AP6255
SMD,12x12mm-30℃~+85℃ -86dBm 14dBm 2.4GHz 3.3V Bluetooth4.2、IEEE802.11a/b/g/n/ac Integrated Bluetooth function On-board PCB Antenna SMD,12x12mm WiFi Modules ROHSAMPAK TechWiFi ModulesAP2281-1WG
SOT-26-40℃~+85℃ 1 1.5V~6V 2A 80mΩ Active High High Side Switch Output discharge function、Soft-start SOT-26 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution SwitchesAP9211
Single chip Li-Ion protection ICDiodes IncorporatedUncategorisedAXP173
QFN-32L0.7V~3.5V、0.7V~2.275V 1.2A、1.6A 2.9V~6.3V QFN-32L Power Management - Specialized ROHSX-Powers TechPower Management - SpecializedUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdFeatures
- CPU - Allwinner D1 processor (RISC-V C906 @ 1GHz)
- RAM - 16Gb DDR3L max
- microSD card slot
- microUSB OTG port
- RGMII interface for Ethernet
- LCD interface
- standard Apollo.IoT expansion header
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | 100nF | Capacitor_SMD:C_0402_1005Metric | C10, C20, C100, C101, C102, C103, C116, C117, C128, C200, C201, C202, C203, C204, C205, C206 +28 |
| 12 | 10uF | Capacitor_SMD:C_0603_1608Metric | C305, C308, C311, C319, C320, C321, C326, C328, C329, C400, C410, C411 |
| 7 | 3V3 | Diode_SMD:D_SOD-923 | D1, D2, D3, D4, D5, D6, D7 |
| 6 | 1uF | Capacitor_SMD:C_0402_1005Metric | C316, C317, C318, C601, C603, C605 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP301, TP302, TP303 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R302, R303 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C309, C310, C312, C313 |
| 5 | 47k | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R12, R304 |
| 5 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H3, H4, H200, H201 |
| 3 | 2.2k | Resistor_SMD:R_0402_1005Metric | R200, R201, R301 |
| 3 | 240 | Resistor_SMD:R_0402_1005Metric | R47, R101, R104 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R305 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 4.7uH | Inductor_SMD:L_TDK_NLV25_2.5x2.0mm | L302, L303 |
| 2 | 470nF | Capacitor_SMD:C_0402_1005Metric | C90, C92 |
| 2 | Conn_01x08 | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | J1, J2 |
| 2 | FerriteBead_Small | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP7C | SW1, SW2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R601 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R410 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R332 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2.7k | Resistor_SMD:R_0402_1005Metric | R502 |
| 1 | 200K | Resistor_SMD:R_0402_1005Metric | R315 |
| 1 | 22uH | Inductor_SMD:L_Wuerth_MAPI-3010 | L601 |
| 1 | 24M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R501 |
| 1 | 47k | Resistor_SMD:R_Array_Concave_4x0402 | RN1 |
| 1 | 562k | Resistor_SMD:R_0402_1005Metric | R402 |
| 1 | 5V | Diode_SMD:D_SOD-923 | D8 |
| 1 | 976k | Resistor_SMD:R_0402_1005Metric | R401 |
| 1 | AP22811 | Package_TO_SOT_SMD:SOT-23-5 | U410 |
| 1 | AP3019 | Package_TO_SOT_SMD:SOT-23-6 | U601 |
| 1 | AP6255 | sdio:lga44_12x12mm_P0.9 | U100 |
| 1 | AP9211 | diodes:DFN-2030-6 | U500 |
| 1 | AXP173 | Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias | U300 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | AE1 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C602 |
| 1 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J3 |
| 1 | Conn_02x22_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x22_P1.27mm_Vertical | J6 |
| 1 | D1 | allwinner:BGA-337_20x20_13.0x13.0mm | U101 |
| 1 | DDR3L-x16 | winbond:BGA-96_9x14mm_P0.8mm | U200 |
| 1 | IS31FL3193 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm | U602 |
| 1 | LED_RGBA | led:rgb-1204 | D9 |
| 1 | L_Small | Inductor_SMD:L_Wuerth_MAPI-2510 | L400 |
| 1 | MCP1640CH | Package_TO_SOT_SMD:SOT-23-6 | U400 |
| 1 | Micro_SD_Card_Det | gct:MEM20610118800A | J5 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J4 |
Similar boards
- 4 layers66 × 55 mm

- 4 layers80 × 42 mm

Module
vd-rd/sbc_allwinner_a13
Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)
179 parts38 - 4 layers66 × 42 mm

- 4 layers80.8 × 80.8 mm

- 2 layers42.9 × 70.5 mm

Lightningtrigger
kanestoboi/lightningtrigger
A lightning detection tool for high-speed DSLR photography
72 parts1 - 4 layers40 × 40 mm

- 4 layers85 × 56 mm

- 4 layers48 × 35 mm

Questions
How big is the Module PCB?
It measures 60 × 118 mm and has 4 copper layers, 2.02 mm thick.
What parts does the Module use?
153 parts, built around the AP6255, AP2281-1WG, AP9211 and AXP173. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Module KiCad files?
From the vd-rd/sbc_allwinner_D1 repository on GitHub, at the commit this page was made from: the board is module.kicad_pcb and its schematic cpu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask vd-rd before reusing the design.