2 layers109.2 × 71.4 mm
2 layers38.1 × 53.3 mm
Swipe stack glove
vclagudu/SWIPE-STACKSenior Design Projrct
- Size
- 38.1 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 92
- Pads
- 201
- Tracks, vias
- 295, 38
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Jan 2024
- Updated
- 3 May 2024
Overview
Swipe stack glove is an open-source printed circuit board by vclagudu, from the vclagudu/SWIPE-STACK repository on GitHub. It is a 2-layer board of 38.1 × 53.3 mm with 46 parts on 92 nets, routed with 295 tracks and 38 vias.
It is built around the BNO085, MAX7375AXR805+T and ECX-.327-CDX-1293. Its parts include 14 capacitors, 10 resistors, 5 connectors, 4 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
3
BNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometers
MAX7375AXR805+T
SC-70-40℃~+125℃ 2.7V~5.5V 6.4mA 8MHz CMOS SC-70 Programmable Oscillators ROHSMaxim Integrated (Analog Devices)Programmable Oscillators
ECX-.327-CDX-1293
SMD3215-2P-40℃~+85℃ 12.5pF 32.768kHz 70kΩ ±5ppm SMD3215-2P Crystals ROHSECSCrystals
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C8, C9, C10, C11, C12, C13, C14 |
| 4 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1, SW2, SW3, SW4 |
| 3 | 1k | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R11, R12 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R7 |
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 510 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | BNO085 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U2 |
| 1 | B_BottomLeft | MountingHole:MountingHole_2.5mm | H3 |
| 1 | B_BottomRight | MountingHole:MountingHole_2.5mm | H4 |
| 1 | B_TopLeft | MountingHole:MountingHole_2.5mm | H1 |
| 1 | B_TopRight | MountingHole:MountingHole_2.5mm | H2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x05_Socket | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | ECX-.327-CDX-1293 | GlovePCB:XTAL_ECS-.327-12.5-34RR-TR | XTAL1 |
| 1 | HM-19 | GlovePCB:HM-11-MODULE | U4 |
| 1 | MAX7375AXR805 | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | U3 |
| 1 | STM32F091RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | blue | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
Questions
How big is the Swipe stack glove PCB?
It measures 38.1 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Swipe stack glove use?
46 parts, built around the BNO085, MAX7375AXR805+T and ECX-.327-CDX-1293. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Swipe stack glove KiCad files?
From the vclagudu/SWIPE-STACK repository on GitHub, at the commit this page was made from: the board is PCB/swipe-stack-glove/swipe-stack-glove.kicad_pcb and its schematic PCB/swipe-stack-glove/swipe-stack-glove.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Swipe stack glove design in my own project?
Its repository states no licence, so its author keeps all rights: ask vclagudu before reusing the design.
More from vclagudu/SWIPE-STACK
1Similar boards
- 2 layers36 × 38 mm
- 4 layers84.4 × 68.2 mm
Phenobottle sensorboard
Flynsky/phenobottle-sensorboard
Phenobottle Sensor Board – A compact board for monitoring and controlling algae growth chambers, featuring pH, temperature, and light measurement frontends, a high-gain dual-stage transimpedance amplifier, a capacitive…
160 parts - 4 layers99.9 × 49.9 mm
SEWER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
90 parts4LGPL-2.1 - 2 layers97.2 × 110 mm
Senior Design
Stamic-kk/CyberBall-Showdown-The-Ultimate-PVR-Foosball
Purdue ECE Senior Design. A Player vs. Robot foosball table consists of ball tracking, trajectory computation, and motion control.
44 parts3MIT - 2 layers146.1 × 101.6 mm
- 4 layers80 × 40 mm
Tuner time
SG295/ece477_guitartuner
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
112 parts2 - 4 layers27.5 × 83.3 mm
- 2 layers100.3 × 100.3 mm
