
PETER
dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.
SEWER is an open-source printed circuit board by dennowiggle, from the dennowiggle/Retro-PETER repository on GitHub, published under the LGPL-2.1 licence. It is a 4-layer board of 99.9 × 49.9 mm with 90 parts on 151 nets, routed with 1,256 tracks and 303 vias.
It is built around the EZ80F91AZA50EK, TLV1117LV33DCYR and RC0603FR-0710KL, with the CC0603KRX7R9BB104, RC0603JR-070RL and PH2-08-UA among its other parts. Its parts include 43 resistors, 30 capacitors, 6 connectors, 2 ICs and 1 crystal.
Z8S180 On RCBUS Only.
ZORO is an RCBUS board with a Z180 CPU. There is no RAM or ROM memory hosted on the board.


The 'output' directory contains the BOM, netlist, and PDF schematic.
Board design used KiCad 8.0.4.
Change J2 to Adam Tech part number PH2RA-80-UA to reduce insertion force.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 10K | Resistor_SMD:R_0603_1608Metric | R301, R302, R303, R305, R410, R411, R412, R413, R417, R418, R602, R603, R604, R605, R606, R607 +12 |
| 19 | 100nF | Capacitor_SMD:C_0603_1608Metric | C201, C302, C303, C304, C305, C307, C308, C309, C311, C312, C313, C314, C316, C317, C318, C320 +3 |
| 9 | 33R | Resistor_SMD:R_0603_1608Metric | R304, R401, R402, R403, R404, R405, R406, R407, R408 |
| 9 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C202, C301, C306, C310, C315, C319, C322, C323, C603 |
| 6 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202, R203, R204, R205, R206 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965 | H2, H3, H4, H5 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C601, C602 |
| 2 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J202, J203 |
| 2 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_7.5x8mm_SilkScreen | LOGO1, LOGO2 |
| 1 | 61200621621 | WTM_Library:Wurth_61200621621 | J301 |
| 1 | BAT-HLD-012-SMT | WTM_Library:BAT-HLD-012-SMT_TEC | B601 |
| 1 | Conn_02x03 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J204 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J601 |
| 1 | Conn_02x40_Top_Bottom | WTM_Library:RCBUS_PinHeader_2x40_P2.54mm_Horizontal | J201 |
| 1 | ECX-.327-CDX-1293 | Crystal:Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering | Y601 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | TLV1117LV33DCYR | Package_TO_SOT_SMD:SOT-223 | U302 |
| 1 | eZ80F91-LQFP144 | Package_QFP:LQFP-144_20x20mm_P0.5mm | U301 |

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/Retro-PETER
3.3V Retro computer project => FPGA + RCBUS + CPU boards making a custom system.

dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project


iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

pinqin/PinJammerV01
This file documents the hardware of PCB 1001016-001-10-01PinJammerV01, including a consolidated bill of materials.


Flynsky/phenobottle-sensorboard
Phenobottle Sensor Board – A compact board for monitoring and controlling algae growth chambers, featuring pH, temperature, and light measurement frontends, a high-gain dual-stage transimpedance amplifier, a capacitive…

It measures 99.9 × 49.9 mm and has 4 copper layers, 1.6 mm thick.
90 parts, built around the EZ80F91AZA50EK, TLV1117LV33DCYR, RC0603FR-0710KL and CC0603KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dennowiggle/Retro-PETER repository on GitHub, at the commit this page was made from: the board is Hardware/SEWER/SEWER.kicad_pcb and its schematic Hardware/Analyzer/Analyzer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).