

Fob Design Files
This is our repo for our ECE445 Key FOB project
- Size
- 44.7 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 37
- Pads
- 122
- Tracks, vias
- 233, 71
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Sep 2024
- Updated
- 2 Dec 2024
Overview
Fob Design Files is an open-source printed circuit board by vasavbn2, from the vasavbn2/ECE445 repository on GitHub. It is a 2-layer board of 44.7 × 63.5 mm with 30 parts on 37 nets, routed with 233 tracks and 71 vias.
It is built around the CC1101RGPR, BU2032SM-JJ-GTR and ANT-315-HESM, with the D6C90 F2 LFS among its other parts. Its parts include 15 capacitors, 5 ICs, 4 inductors, 2 resistors and 1 connector. It belongs with the STM32 boards of this library.
Main components
4CC1101RGPR
QFN-20-EP(4x4)-112dBm -40℃~+85℃ 1.8V~3.6V 12dBm 15.7mA 300MHz~348MHz、387MHz~464MHz、779MHz~928MHz 315MHz、433MHz、868MHz、915MHz 34.2mA 500Kbps ISM Power-on reset function、Supports RSSI function、CRC check function、Input sync word detection function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsBU2032SM-JJ-GTR
SMD-40℃~+280℃ SMD Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorANT-315-HESM
-2 315MHz - Antennas ROHSLinxAntennasD6C90 F2 LFS
插件插件 Pushbutton Switches ROHSC&KPush Switches
README
README.mdECE445
This is our repo for our ECE445 Key FOB project!
Week of 9/23/24
Discussed our proposal in meeting with our TA. Next steps: Perform tolerance analysis and begin work on design document.
Week of 9/30/24
Discussed the design document and design review process with our TA. Working on the proposal regrade, including tolerance analysis and ethics. Next steps: Complete schematics in KiCad so we have complete schematics and BOMs for our 2 boards. Finish composing the design document.
Week of 10/7/24
Finalized schematics and started layouts
Week of 10/14/24
Completed fob layout BOM for fob: https://www.digikey.com/short/3907nrjb
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C8, C9 |
| 3 | 33nH | Inductor_SMD:L_0603_1608Metric | L1, L3, L4 |
| 3 | 6.8pF | Capacitor_SMD:C_0603_1608Metric | C11, C12, C14 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric | C10, C13 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 1 | 10k | Inductor_SMD:L_0603_1608Metric | R2 |
| 1 | 12pF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 18nH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 56k | Inductor_SMD:L_0603_1608Metric | R1 |
| 1 | ANT-315-HESM | ANT-315-HESM:XDCR_ANT-315-HESM | E1 |
| 1 | BU2032SM-JJ-GTR | SamacSys_Parts:BU2032SMJJGTR | U3 |
| 1 | CC1101RGPR | CC1101:RGP20_2P4X2P4 | U2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1 |
| 1 | D6C90F2LFS | SamacSys_Parts:D6C90F2LFS | S1 |
| 1 | MAX16054AZT_T | MAX16054AZT_T:SOT95P275X110-6N | U1 |
| 1 | NX3225GA-26.000MHZ-EXS00A-CG01972 | SamacSys_Parts:NX3225GA16000MSTDCRG1 | Y1 |
| 1 | STM32C011F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | TLV70028_SOT353 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
More from vasavbn2/ECE445
2- 2 layers52.5 × 62.1 mm

- 2 layers20.4 × 38.8 mm

Similar boards
- 4 layers99.9 × 69.9 mm

- 4 layers41.4 × 27.9 mm

Imu geolocator
gabrielpgagne/imu-geolocator-hw
An experimental project about trying to use an IMU as a geolocalization device.
34 partsGPL-3.0 - 2 layers89 × 51 mm

- 2 layers100 × 100 mm

LEOS flight computer
VIP-LES/flight-computer-pcb
The flight computer PCB stack design. Started Fall '25
38 parts - 2 layers

- 2 layers47.2 × 35 mm

- 4 layers95.4 × 36.2 mm

- 4 layers24 × 75 mm

The guesser
Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.
117 parts7GPL-3.0
Questions
How big is the Fob Design Files PCB?
It measures 44.7 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fob Design Files use?
30 parts, built around the CC1101RGPR, BU2032SM-JJ-GTR, ANT-315-HESM and D6C90 F2 LFS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fob Design Files KiCad files?
From the vasavbn2/ECE445 repository on GitHub, at the commit this page was made from: the board is Fob_Design_Files/Fob_Design_Files.kicad_pcb and its schematic Fob_Design_Files/Fob_Design_Files.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fob Design Files design in my own project?
Its repository states no licence, so its author keeps all rights: ask vasavbn2 before reusing the design.