
DP Aux MITM V0
JX5S/DP_aux_emulator
Board for modifying traffic on DP-aux. Specifically, board is made for correcting false information provided by the PSVR2 making it not work on PC. Except for DP-aux, it is a passive extension of USB-C.

GitHub Board is an open-source printed circuit board by varshinicb1, from the varshinicb1/Power-distribution-board repository on GitHub. It is a 6-layer board of 304.8 × 165.1 mm with 87 parts on 103 nets, routed with 446 tracks and 72 vias.
Its parts include 6 connectors and 1 capacitor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20 +4 |
| 11 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | PI_Sens1_Inp1, PI_Sens1_Out1, PI_Sens2_Inp1, PI_Sens2_Out1, PI_Sens3_Inp1, PI_Sens3_Out1, PI_Sens4_Inp1, PI_Sens4_Out1, PI_Sens5_Inp1, PI_Sens6_Inp1, PI1 |
| 9 | TestPoint_Probe | TestPoint:TestPoint_Bridge_Pitch2.54mm_Drill0.7mm | TP18, TP22, TP23, TP27, TP28, TP31, TP41, TP44, TP45 |
| 8 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1, LS2, LS3, LS4, LS5, LS6, LS7, LS8 |
| 6 | Conn_01x02_Male | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | XT1, XT2, XT3, XT4, XT5, XT6 |
| 6 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | EN1, EN2, EN3, EN4, EN5, EN6 |
| 6 | R_US | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | PUR1, PUR2, PUR3, PUR4, PUR5, PUR6 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H21, H22, H23, H24 |
| 3 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4, J5, J6 |
| 3 | Conn_02x10_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1, J2, J3 |
| 3 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | RC1_ST1, RC2_ST1, RC3_ST1 |
| 2 | Conn_01x02_Male | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | 5V1, 12V1 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | OD_Encoder_Inp1, OD_Encoder_Out1 |
| 1 | C | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | Conn_01x03 | Connector_AMASS:AMASS_MR30PW-M_1x03_P3.50mm_Horizontal | OD_Mot_Out1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | ODPow1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | OD_Mot_Inp1 |

JX5S/DP_aux_emulator
Board for modifying traffic on DP-aux. Specifically, board is made for correcting false information provided by the PSVR2 making it not work on PC. Except for DP-aux, it is a passive extension of USB-C.


mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.


roshan0282/ttsky-asic-rayforge
Tiny Tapeout is an educational project that aims to make it easier and cheaper than ever to get your digital and analog designs manufactured on a real chip.

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.

dhruv1859/CARVantaBAC
🧬 CARVanta Next-Generation Precision Oncology & AI CAR-T Cell Platform Interactive 3D Biological Digital Twin • 3D Neural Bridge • Sentinel HYDRA Biosensor
It measures 304.8 × 165.1 mm and has 6 copper layers, 1.6 mm thick.
87 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the varshinicb1/Power-distribution-board repository on GitHub, at the commit this page was made from: the board is GitHub_Board.kicad_pcb and its schematic GitHub_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask varshinicb1 before reusing the design.