vanttec/usv_Lumos_pcbRevD Lumos is an open-source printed circuit board by vanttec, from the vanttec/usv_Lumos_pcb repository on GitHub. It is a 2-layer board of 84.6 × 54 mm with 55 parts on 72 nets, routed with 339 tracks and 41 vias.
It is built around the 74AHCT125D, ESP32-S3-WROOM-1-N8 and TCAN330D, with the AMS1117-3.3 among its other parts. Its parts include 15 resistors, 12 connectors, 7 capacitors, 7 diodes and 5 ICs. It belongs with the ESP32 boards of this library.
PCB Led Strip/Expansión
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 330 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R8, R9, R10 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R11, R12, R13, R15 |
| 5 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J10, J11, J12 |
| 4 | .1 uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1k5 | Resistor_SMD:R_0402_1005Metric | R2, R3, R7 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J7, J8 |
| 3 | GREEN | LED_SMD:LED_0603_1608Metric | D1, D4, D5 |
| 3 | RED | LED_SMD:LED_0603_1608Metric | D3, D6, D7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_MEC_5E | Button_Switch_SMD:SW_MEC_5GSH9 | BOOT1, RESET1 |
| 1 | 10 uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 5V XT60 | Connector_BarrelJack:BarrelJack_Wuerth_694102107102_1.0x3.9mm | J6 |
| 1 | 74AHCT125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Choke_Schaffner_RN102-0.3-02-12M | Inductor_THT:Choke_Schaffner_RN102-04-14.0x14.0mm | FL1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | LM66200DRLR | footprints:SOT-5X3_DRL_TEX | IC1 |
| 1 | TCAN330 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J9 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D2 |
It measures 84.6 × 54 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the 74AHCT125D, ESP32-S3-WROOM-1-N8, TCAN330D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vanttec/usv_Lumos_pcb repository on GitHub, at the commit this page was made from: the board is RevD_Lumos/RevD_Lumos.kicad_pcb and its schematic RevD_Lumos/RevD_Lumos.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vanttec before reusing the design.
shashwtd/mosaic-x3
Imagine if github contribution chart came to life as a frame which you could hang on your wall for decor. This is mosaic, you plug it in, connect your github account and tadaaa you now have a frame that mimicks your…
Matyas604/Security-Alarm-Panel
Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.
LostInCompilation/WLED-Controller-PCB
WLED Controller Board with ESP32 - 4 Channels - Current and Power Monitoring - INMP441 Microphone