Skip to the content
8 layers22 × 44 mmMotar drivar, the printed circuit board in 3D
Size
22 × 44 mm
Copper layers
8
Thickness
1.6 mm
Parts
88
Nets
78
Pads
293
Tracks, vias
621, 710
Pours
15
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Oct 2025
Updated
9 Oct 2025

Overview

Motar drivar is an open-source printed circuit board by EMakerDragon, from the EMakerDragon/G431_M2006_ESC repository on GitHub, published under the MIT licence. It is an 8-layer board of 22 × 44 mm with 88 parts on 78 nets, routed with 621 tracks and 710 vias.

It is built around the TCAN330D, AMS1117-3.3 and MBR0560. Its parts include 34 resistors, 29 capacitors, 10 ICs, 6 connectors and 5 diodes. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

G431_M2006_ESC

基板の説明

STのB-G431B-ESC1をRobomaster M2006を駆動するために最適化したモータードライバです。
回路はB-G431B-ESC1のC01ステップを参考にしており、以下の回路を流用しています。
・ゲートドライバ周りの回路
・シャント抵抗周りの回路
・10V用DCDC
流用した回路は部品の定数や部品名などをB-G431B-ESC1と共通化しているので、B-G431B-ESC1から部品を移植することで製作できます。
また、B-G431B-ESC1から以下の機能を追加しています。
・M2006のエンコーダー用JST-GHコネクタ(J1)
・デバッグ・書き込み用1.27mmピンヘッダ(J7)
・ユーザーLED(フルカラー)(D2,R5~R7)
・ユーザーボタン(SW1)
・レギュレータ(AMS1117-3.3)(U12)
・NRSTプルアップ抵抗(R8)
かなり適当な設計なので、使用する場合は自己責任でお願いします。
適当に作ったので微妙にサイズが合わなかったりしますが、この基板に使用しているシンボル(c610_clone)とフットプリント(C610_clone.pretty)を一応アップしておきます。

ソフトウェア

ソフトウェアはこちらのリポジトリにあります。

Parts

88
QtyValueFootprintReferences
1415ufCapacitor_SMD:C_0805_2012MetricC27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40
710K_0402Resistor_SMD:R_0402_1005MetricR8, R35, R39, R41, R45, R48, R52
633_0603Resistor_SMD:R_0603_1608MetricR34, R38, R40, R43, R47, R50
30.003_2512Resistor_SMD:R_2512_6332MetricR2, R3, R4
31.5k_0402Resistor_SMD:R_0402_1005MetricR67, R69, R70
31uF_0603Capacitor_SMD:C_0603_1608MetricC43, C52, C58
32.2k_0402Resistor_SMD:R_0402_1005MetricR80, R81, R82
3200_0402Resistor_SMD:R_0402_1005MetricR5, R6, R7
322k_0402Resistor_SMD:R_0402_1005MetricR64, R65, R66
3470nF_0603Capacitor_SMD:C_0603_1608MetricC49, C55, C62
3MBR0560Diode_SMD:D_SOD-123D6, D8, D9
3~C610_clone:AON6926U3, U7, U9
3~Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5, U6, U8
2Conn_01x01C610_clone:POWER_PADJ5, J6
10.1uf_0402Capacitor_SMD:C_0402_1005MetricC2
110uf_1206Capacitor_SMD:C_1206_3216MetricC44
1120_0402Resistor_SMD:R_0402_1005MetricR1
11uf_0402Capacitor_SMD:C_0402_1005MetricC56
12.2uf_0402Capacitor_SMD:C_0402_1005MetricC64
122uf_1206Capacitor_SMD:C_1206_3216MetricC45
127pf_0402Capacitor_SMD:C_0402_1005MetricC46
13.9nf_0402Capacitor_SMD:C_0402_1005MetricC42
1300_0402Resistor_SMD:R_0402_1005MetricR33
134.8k_0402Resistor_SMD:R_0402_1005MetricR32
14.7k_0402Resistor_SMD:R_0402_1005MetricR30
14.7nf_0402Capacitor_SMD:C_0402_1005MetricC50
14.7uf_0603Capacitor_SMD:C_0603_1608MetricC19
15x5mmInductor_SMD:L_Cenker_CKCS4030L2
162_0402Resistor_SMD:R_0402_1005MetricR31
18.2k_0402Resistor_SMD:R_0402_1005MetricR36
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U12
1Conn_01x02C610_clone:CAN_PADJ3
1Conn_01x03C610_clone:MR30J4
1Conn_02x03_Counter_ClockwiseConnector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_VerticalJ7
1Crystal_GND2C610_clone:3213_crystalY1
1DO216-AAC610_clone:STPS1L40MD7
1JST_GH_4Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_HorizontalJ1
1LED_ARGBLED_SMD:LED_Wurth_150044M155260D2
1STM32G431CBUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU1
1SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1TCAN330Package_TO_SOT_SMD:SOT-23-8_HandsolderingU2
1TXTestPoint:TestPoint_Pad_D1.5mmTP1
1~C610_clone:L7986TRU4

Similar boards

  • 2 layers80 × 50 mmLcd dual, the printed circuit board in 3D

    Lcd dual

    Novin3dp/7inch-hdmi-screen

    این برد دولایه (۶۸×۴۲ میلی‌متر) همان پنل ۷ اینچ AT070TN92 و تاچ GT915 را این بار از پورت DSI رزبری‌پای راه می‌اندازد. نسخه‌ی HDMI در پوشه‌ی hardware/ دست‌نخورده باقی مانده است.

    127 parts1
  • 4 layers70 × 110 mmNixon phone, the printed circuit board in 3D

    Nixon phone

    rrruark/nixon_phone

    Analog Telephone Adapter Audio Player

    117 partsMIT
  • 2 layersRampzbackup, the printed circuit board in 3D

    Rampzbackup

    mjrice/PICA

    Power Interface and Control Adapter, an Arduino Mega Reprap Shield

    100 parts16
  • 4 layers80 × 49 mmPIB, the printed circuit board in 3D

    PIB

    apexsat/payload-electrical

    PCBs for payload

    319 parts1
  • 4 layers170 × 80 mmUMTK, the printed circuit board in 3D

    UMTK

    AmorphousX/UMTK

    Code for running UMTK

    99 partsCC0-1.0
  • 2 layers120 × 90 mmLab5 project, the printed circuit board in 3D

    Lab5 project

    ttpy2845/KiCAD_Lab5

    65 parts
  • 2 layers84.6 × 54 mmRevD Lumos, the printed circuit board in 3D

    RevD Lumos

    vanttec/usv_Lumos_pcb

    55 parts

Questions

How big is the Motar drivar PCB?

It measures 22 × 44 mm and has 8 copper layers, 1.6 mm thick.

What parts does the Motar drivar use?

88 parts, built around the TCAN330D, AMS1117-3.3 and MBR0560. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Motar drivar KiCad files?

From the EMakerDragon/G431_M2006_ESC repository on GitHub, at the commit this page was made from: the board is motar_drivar.kicad_pcb and its schematic motar_drivar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Motar drivar design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).