Skip to the content
2 layers68.6 × 53.3 mmCustom Arduino, the printed circuit board in 3D

Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

Size
68.6 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
59
Pads
207
Tracks, vias
425, 92
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Nov 2018
Updated
5 Jul 2019

Overview

Custom Arduino is an open-source printed circuit board by uwsailbot, from the uwsailbot/electrical_board_designs_2018 repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 44 parts on 59 nets, routed with 425 tracks and 92 vias.

It is built around the ATMEGA328-PU, FT232RL-REEL and AZ1117EH-3.3TRG1, with the UJ2-MBH-1-SMT-TR among its other parts. Its parts include 11 connectors, 10 capacitors, 7 resistors, 4 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

Electrical-Board-Designs-2018

Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

Parts

44
QtyValueFootprintReferences
51kResistors_SMD:R_0603R1, R2, R3, R5, R6
4Conn_01x08Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mmJ3, J6, J7, J10
31uFCapacitors_SMD:C_0603C5, C6, C7
3LEDLEDs:LED_0603D2, D3, D4
2100nCapacitors_SMD:C_0603C3, C4
222pFCapacitors_SMD:C_0603C9, C10
247uFCapacitors_SMD:CP_Elec_4x5.3C1, C2
2Conn_01x06Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mmJ4, J8
2Conn_01x10Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mmJ5, J9
10.1uFCapacitors_SMD:C_0603C8
110kResistors_SMD:R_0603R4
1200Resistors_SMD:R_0603R7
1ATMEGA328-PUdigikey-footprints:DIP-28_W7.62mmU1
1AZ1117EH-3.3TRG1digikey-footprints:SOT-223U4
1Conn_02x02_Odd_EvenPin_Headers:Pin_Header_Straight_2x02_Pitch2.54mmJ2
1Conn_02x03_Odd_EvenPin_Headers:Pin_Header_Straight_2x03_Pitch2.54mmJ11
1CrystalCrystals:Crystal_SMD_5032-2pin_5.0x3.2mmY1
1DDiodes_SMD:D_0603D1
1FT232RL-REELdigikey-footprints:SSOP-28_W5.30mmU2
1FuseFuse_Holders_and_Fuses:Fuse_SMD1206_ReflowF1
1LOGOSailBot:PCB LogoG***
1MC33269DR2-5.0Gdigikey-footprints:SOIC-8_W3.9mmU3
1SW_PushButtons_Switches_SMD:SW_SPST_PTS645SW1
1UJ2-MBH-1-SMT-TRdigikey-footprints:USB_Mini_B_Female_UJ2-MBH-1-SMT-TRJ1

The 40 most common of 44 parts.

More from uwsailbot/electrical_board_designs_2018

4
  • 2 layers57.5 × 43 mmReceiver Board, the printed circuit board in 3D

    Receiver Board

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    31 parts
  • 2 layers30.5 × 29.2 mmMicro Arduino Breakout, the printed circuit board in 3D

    Micro Arduino Breakout

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    25 parts
  • 2 layers77.2 × 39.4 mmGPS system, the printed circuit board in 3D

    GPS system

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    19 parts
  • 2 layers36 × 22.5 mmCAN Bus Arduino, the printed circuit board in 3D

    CAN Bus Arduino

    uwsailbot/electrical_board_designs_2018

    Repo for all the ongoing/completed electrical board designs of the 2018-2019 season

    18 parts

Similar boards

  • 4 layers36.5 × 94.1 mmNova, the printed circuit board in 3D

    Nova

    ERFSEDS/novafc-hardware

    89 parts2
  • 2 layers157.5 × 129.5 mmTICAF v1, the printed circuit board in 3D

    TICAF v1

    jlopes7/pcb_layouts

    FOSS PCB Based layouts

    89 partsMIT
  • 2 layers61 × 35.6 mmEFMPod, the printed circuit board in 3D

    EFMPod

    akowalczyk18/Kicad

    pcb projects

    52 parts5
  • 4 layers80 × 40 mmSchem 1, the printed circuit board in 3D

    Schem 1

    can-caglar/dashcam

    An esp32 based low-cost IoT car dash-cam.

    90 parts4
  • 2 layers100 × 100 mmReflow, the printed circuit board in 3D

    Reflow

    windsorschmidt/reflow

    Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

    95 parts4MIT
  • 4 layers60 × 100 mmPCB Drone With FPGA, the printed circuit board in 3D

    PCB Drone With FPGA

    mfkiwl/PCB-Drone-With-FPGA

    PCB design for the Drone, FPGA on board

    97 parts1
  • 4 layers55.5 × 36.1 mmFlight Computer, the printed circuit board in 3D

    Flight Computer

    MASA-Dearborn/Flight-Computer

    145 parts

Questions

How big is the Custom Arduino PCB?

It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Custom Arduino use?

44 parts, built around the ATMEGA328-PU, FT232RL-REEL, AZ1117EH-3.3TRG1 and UJ2-MBH-1-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Custom Arduino KiCad files?

From the uwsailbot/electrical_board_designs_2018 repository on GitHub, at the commit this page was made from: the board is Arduino Uno/Custom Arduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Custom Arduino design in my own project?

Its repository states no licence, so its author keeps all rights: ask uwsailbot before reusing the design.