
NOVA MCU (STM)
ERFSEDS/common_modules
These are the common modules that are to be used for various projects and boards

Nova is an open-source printed circuit board by ERFSEDS, from the ERFSEDS/novafc-hardware repository on GitHub. It is a 4-layer board of 36.5 × 94.1 mm with 89 parts on 71 nets, routed with 995 tracks and 148 vias.
It is built around the FT232RL-REEL, W25N512GVPIT and ASMB-MTB0-0A3A2, with the AZ1117EH-3.3TRG1, BMI088 and ECS-260-8-36B-CKY-TR among its other parts. Its parts include 30 capacitors, 22 resistors, 7 transistors, 3 diodes and 2 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C10, C14, C16, C23, C25, C26, C28, C29 +1 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R6, R7, R9, R10, R11, R13, R14, R15, R17, R18 |
| 7 | IRLML6344TRPBFee | PyroChannel:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 3.3 | PyroChannel:TO-263-2_TabPin1 | R8, R12, R16 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11, C13, C30 |
| 3 | Conn_01x02_Female | PyroChannel:2_pin_screw_terminal | PYRO 1, PYRO 2, PYRO 3 |
| 2 | 10pf | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19, C20 |
| 2 | 18pf | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C18, C21 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C17 |
| 2 | 5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21, R22 |
| 2 | DIODE | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4 |
| 1 | 0.33uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C27 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C31 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C22 |
| 1 | 1mF | PyroChannel:CP_Radial_D10.0mm_P5.00mm | C24 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R24 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 600 OHM | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | 95.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R23 |
| 1 | ASMB-MTB0-0A3A2 | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | D1 |
| 1 | AZ1117EH-3.3TRG1 | Power:SOT230P700X180-4N | 3v3 REG |
| 1 | B | Barometer:MS560702BA03-50 | Barometer1 |
| 1 | BMI088 | Gyroscope:16-LGA-(4.5x3) | G |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | BATT POWER |
| 1 | Conn_01x06_Male | NOVA MCU (STM):j-link_6_pin_needle | J1 |
| 1 | Conn_02x10_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J5 |
| 1 | ECS-260-8-36B-CKY-TR | NOVA MCU (STM):ECX-2236B | Y1 |
| 1 | FT232RL-REEL | Footrpint Library:SOP65P780X200-28N | FTDI |
| 1 | H3LIS331DL | Accelerometer_Breakout:TFLGA-16_3x3mm | A |
| 1 | JTX310 | NOVA MCU (STM):JTX310 | Y2 |
| 1 | KSR223GLFG | NOVA MCU (STM):KSR223GLFG | S1 |
| 1 | LOGO | Rev1Logo:Logo3 | G*** |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | Micro_SD1 |
| 1 | OP179GRT | Package_TO_SOT_SMD:SOT-23-5 | Battery Monitor |
| 1 | PS1440P02BT | Transducer:BUZZER_PS1440P02BT | BUZZER |
| 1 | STM32F401RBTx | NOVA MCU (STM):LQFP-64_10x10mm_P0.5mm | STM32F401RBT |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | USB-C |
| 1 | W25N512GVPIT | FHSD:SON127P800X600X80-9N | FLASH |

ERFSEDS/common_modules
These are the common modules that are to be used for various projects and boards

uwsailbot/electrical_board_designs_2018
Repo for all the ongoing/completed electrical board designs of the 2018-2019 season



Oak-Development-Technologies/Lattice-FeatherWing
Home of the Lattice FeatherWing

Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects


It measures 36.5 × 94.1 mm and has 4 copper layers, 1.6 mm thick.
89 parts, built around the FT232RL-REEL, W25N512GVPIT, ASMB-MTB0-0A3A2 and AZ1117EH-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ERFSEDS/novafc-hardware repository on GitHub, at the commit this page was made from: the board is Electrical/Nova/Nova.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ERFSEDS before reusing the design.