
Icepi zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

KiCad design for PurpleDrop electrode board with improved heater conductance, designed for 100x74mm film carrier and 50x50mm top plate.
PD ElectrodeBoard v4 is an open-source printed circuit board by uwmisl, from the uwmisl/pd-electrodeboard-pcb-v4 repository on GitHub. It is a 4-layer board of 100 × 74 mm with 122 parts on 142 nets, routed with 890 tracks and 392 vias.
It is built around the ZNI1000TA. Its parts include 5 connectors and 4 resistors.
KiCad design for PurpleDrop electrode board with improved heater conductance, designed for 100x74mm film carrier and 50x50mm top plate.
This project is designed with KiCad v5.1.5.
For a quick look, there is a Schematic and PCB fab drawing
Much of the board design is auto-generated by python scripts.
FootprintGenerator.ipynb generates the electrode and reservoir footprints.
They are all designed such that their origin should fall on the center of the
electrode "grid" positions. For this design, the pitch of the electrodes is
2.25mm. This script will generate a number of footprints, e.g. electrode_points_1_40deg_rl.kicad_mod.
The naming convention says that this footprint has 1 point per edge, the angle
of the points is 40 degrees, and it has points on the right and left edge (the
top and bottom are flat).
FiducialFootprintGenerator.ipynb generates a silkscreen footprint from an image file
(see TagImages directory), to put april tags
onto the board as fidicuals for image processing. Each tag has a unique ID to aid in
identifying which tag (as well as which version of electrode board) has been
detected.
LayoutGenerator.ipynb generates a layout.yaml file for this
kicad component layout plugin.
This positions the electrodes, and selects between the different edge variants (e.g. trbl, tr)
based on neighboring electrodes in the grid.
This makes the process of experimenting with different electrode footprints and layouts easier. Once the electrodes are positioned, the routing to the connectors is done manually.
| Part Number | Mfg | RefDes | Description | Qty |
|---|---|---|---|---|
| CLP-132-02-F-D-A | Samtec | J1,J2 | 64-pin connectors | 2 |
| 4929 | Keystone | H1-4 | #2-56 solderable threaded insert | 4 |
| PWR163S-25-25R0FE | Bourns | R1-4 | 25W resistor for heating | 4 |
| ZNI1000TA | Diodes Inc. | T1-4 | 1kohm RTD temperature sensor | 4 |
| S5B-PH-SM4-TB | JST | J3 | 5-pin connector for heaters | 1 |
| S8B-PH-SM4-TB | JST | J4 | 8-pin connector for RTDs | 1 |
Initial version
Issues:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | DMFElectrode | electrode_points_1_40deg_trbl | E12, E13, E14, E15, E16, E17, E18, E19, E22, E23, E24, E25, E26, E27, E28, E29 +42 |
| 10 | DMFElectrode | electrode_points_1_40deg_tbl | E20, E30, E40, E50, E60, E70, E80, E92, E94, E96 |
| 10 | DMFElectrode | electrode_points_1_40deg_rbl | E1, E2, E3, E4, E5, E6, E7, E8, E9, E10 |
| 10 | DMFElectrode | electrode_points_1_40deg_trb | E11, E21, E31, E41, E51, E61, E71, E91, E93, E95 |
| 8 | DMFElectrode | electrode_points_1_40deg_trl | E81, E82, E83, E84, E87, E88, E89, E90 |
| 4 | MountingHole_Pad | PurpleDrop:Keystone-4929 | H1, H2, H3, H4 |
| 4 | ResHeater | PurpleDrop:PWR163_Resistor_DPAK | R1, R2, R3, R4 |
| 4 | Reservoir | electrodes:reservoir_A_2.25mm | E200, E201, E202, E203 |
| 4 | ZNI1000 | Package_TO_SOT_SMD:SOT-23 | T1, T2, T3, T4 |
| 2 | Conn_02x32_Odd_Even | PurpleDrop:CLP-132-02-F-D | J1, J2 |
| 1 | AprilTag | PurpleDrop:tag36_11_00004_6.00mm | G1 |
| 1 | AprilTag | PurpleDrop:tag36_11_00006_6.00mm | G3 |
| 1 | AprilTag | PurpleDrop:tag36_11_00005_6.00mm | G2 |
| 1 | DMFElectrode | electrode_points_1_40deg_tr | E97 |
| 1 | DMFElectrode | electrode_points_1_40deg_tl | E98 |
| 1 | HEAT | Connector_JST:JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal | J3 |
| 1 | RTD | Connector_JST:JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J4 |
| 1 | TopPlate | PurpleDrop:TopPlatePad | J11 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs

introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…


pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

tomwimmenhove/MoonPi
Allwinner V3S board with mini PCIe slot for 4G LTE module


schilkp/PmodADC
A fully discrete 14bit, 41kHz, FPGA-controlled Successive-Approximation Audio ADC and R2R Audio DAC.
It measures 100 × 74 mm and has 4 copper layers, 0.8 mm thick.
122 parts, built around the ZNI1000TA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the uwmisl/pd-electrodeboard-pcb-v4 repository on GitHub, at the commit this page was made from: the board is PD_ElectrodeBoard_v4/PD_ElectrodeBoard_v4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask uwmisl before reusing the design.