
/ChargeController2.0.kicad_pcb.jpg)
ChargeController2.0
Repository of the HS-2 Battery Management System
- Size
- 90.2 × 95.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 58
- Pads
- 271
- Tracks, vias
- 453, 65
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2025
- Updated
- 21 May 2026
Overview
ChargeController2.0 is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/BMS-EPS-HS2 repository on GitHub. It is a 2-layer board of 90.2 × 95.9 mm with 88 parts on 58 nets, routed with 453 tracks and 65 vias.
It is built around the BQ25756ERRVR, SI2318CDS-T1-GE3(ES) and AONS66614, with the SS24, BAT54 and 100SP1T1B1M1QEH among its other parts. Its parts include 20 capacitors, 16 connectors, 15 resistors, 11 transistors and 8 diodes.
Main components
8BQ25756ERRVR
VQFN-36-EP(6x5)-40℃~+125℃ 17uA 1~7 20A 4.2V~36V Charging IC I2C Lithium Battery、LiFePO4 Battery Support VQFN-36-EP(6x5) Battery Management ROHSTexas InstrumentsBattery ManagementSI2318CDS-T1-GE3(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETsAONS66614
DFN-8(5x6)1 N-channel 1.8V 2.4mΩ@10V 3.31nF 30pF 51nC 60V 745pF 78W 85A N-Channel Standalone ±20V DFN-8(5x6) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSS24
SMA(DO-214AC)-55℃~+150℃ 200uA@40V 2A 40V 50A 550mV@2A Independent SMA(DO-214AC) Schottky Diodes ROHShongjiachengSchottky DiodesBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky Diodes100SP1T1B1M1QEH
插件-30℃~+85℃ 12.7mm 120V 28.19mm 28V 50,000 cycles 5A 6.86mm Cylinder Lever PC Pin SPDT Through Hole 插件 Toggle Switches ROHSE-SwitchToggle Switches103AT-2
ThroughholeThroughhole NTC Thermistors ROHSSEMITECNTC ThermistorsIHLP6767GZER100M01
SMD,17.2x17.2mm10uH 12mΩ 16.5A 25A ±20% SMD,17.2x17.2mm Power Inductors ROHSVishay IntertechnologyPower Inductors
README
README.mdBMS-EPS-HS2
Repository of the HS-2 Battery Management System
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R19, R20, R21, R22, R26 |
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C14, C16, C19, C20, C25, C27 |
| 7 | SI2318CDS-T1-GE3 | bmsfootprints:SI2318CDS-T1-GE3 | Q1, Q2, Q3, Q4, Q9, Q10, Q11 |
| 6 | 56u | Capacitor_SMD:C_0201_0603Metric | C2, C12, C13, C17, C18, C24 |
| 6 | Conn-1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8, J13, J14, J15 |
| 5 | 10 | Resistor_SMD:R_0603_1608Metric | R4, R11, R12, R14, R30 |
| 4 | AONS66614 | bmsfootprints:AON6482 | Q5, Q6, Q7, Q8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C3, C7, C22 |
| 3 | GREEN | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | SS24 | bmsfootprints:SS24 | D7, D8, D9 |
| 2 | 16.67k | Resistor_SMD:R_0603_1608Metric | R_FBG1, R_ICHG1 |
| 2 | 470n | Capacitor_SMD:C_0402_1005Metric | C15, C26 |
| 2 | 5m | Resistor_SMD:R_1206_3216Metric | R_AC_SNS1, RR_BATT_SNS1 |
| 2 | BAT54 | bmsfootprints:BAT54 | D4, D5 |
| 1 | 100SP1T1B1M1QEH | bmsfootprints:SW_100SP1T1B1M1QEH | SW1 |
| 1 | 103AT-2 | bmsfootprints:103AT-2 | RT1 |
| 1 | 11.83k | Resistor_SMD:R_0603_1608Metric | R_AC2 |
| 1 | 1M | Resistor_SMD:R_0201_0603Metric | R_AC1 |
| 1 | 1u | Capacitor_SMD:C_0201_0603Metric | C23 |
| 1 | 249k | Resistor_SMD:R_0402_1005Metric | R_FB1 |
| 1 | 25k | Resistor_SMD:R_0402_1005Metric | R_ILIM_HIZ1 |
| 1 | 3.3V_PULLUP_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 30.1k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 40k | Resistor_SMD:R_0402_1005Metric | R_FSW_SYNC1 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 5.23k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | BATT_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | BATT_TEST_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | BQ25756ERRVR | bmsfootprints:IC_BQ25756ERRVR | U1 |
| 1 | GND_TEST_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | IHLP6767GZER100M01 | bmsfootprints:IND_IHLP6767GZER100M01 | L1 |
| 1 | RC0402FR-0753K6L | bmsfootprints:RC0402FR-0753K6L | R_AC3 |
| 1 | SCL_MAS_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J17 |
| 1 | SDA_MAS_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J18 |
| 1 | SOL_TEST_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | SP_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SYS-1x2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
| 1 | SYS_TEST_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
More from UWCubeSat/BMS-EPS-HS2
4- 2 layers95.9 × 90.2 mm

- 2 layers99.5 × 99.5 mm
/Charge%20Controller.kicad_pcb.jpg?size=s&soon)
- 4 layers90.2 × 95.9 mm

- 2 layers95.9 × 90.2 mm

Similar boards
- 4 layers100 × 70 mm

- 4 layers160 × 80 mm

- 4 layers150 × 110 mm

System Management Board
precision-sustainable-ag/PlantMap3D-Hardware
The system management board handles all power distribution in the multi-camera system and a few other auxiliary functions. The PCB is designed using KiCad.
130 parts2 - 4 layers178.3 × 67.6 mm

- 2 layers55.9 × 27.9 mm

BeamBreak v1
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
41 parts1 - 2 layers112.7 × 100 mm

- 2 layers120 × 65 mm

Hack a bot controller
aj-floater/hack-a-bot-controller
Hack-A-Bot 2026 Raspberry Pi Pico wireless controller hardware
25 parts - 2 layers127 × 203.2 mm

Questions
How big is the ChargeController2.0 PCB?
It measures 90.2 × 95.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ChargeController2.0 use?
88 parts, built around the BQ25756ERRVR, SI2318CDS-T1-GE3(ES), AONS66614 and SS24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ChargeController2.0 KiCad files?
From the UWCubeSat/BMS-EPS-HS2 repository on GitHub, at the commit this page was made from: the board is hardware/Charge Controller Files (Michael_Sky)/ChargeController2.0.kicad_pcb and its schematic hardware/Charge Controller 3.0 Files (Michael_Sky)/ChargeController3.0/BQ25756E.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ChargeController2.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask UWCubeSat before reusing the design.