2 layers
4 layers45.6 × 65.2 mm
DevBoardInterface 1B
ut-ras/rm_electrical-supercap1- Size
- 45.6 × 65.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 22
- Pads
- 94
- Tracks, vias
- 165, 19
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Mar 2025
- Updated
- 19 Oct 2025
Overview
DevBoardInterface 1B is an open-source printed circuit board by ut-ras, from the ut-ras/rm_electrical-supercap repository on GitHub. It is a 4-layer board of 45.6 × 65.2 mm with 30 parts on 22 nets, routed with 165 tracks and 19 vias.
It is built around the ADS1014IDGS and DAC53401DSG. Its parts include 7 capacitors, 6 resistors, 6 connectors and 5 ICs.
Main components
2
ADS1014IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 1 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2V~5.5V 3.3kHz 500nA 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
DAC53401DSG
WSON-8-EP(2x2)-40℃~+125℃ 1 1.8V~5.5V 10 1LSB 80uA 8us I2C Voltage Buffer WSON-8-EP(2x2) Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DAC)
README
README.mdrm_electrical-supercap
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 3 | XT30_F | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J14, J15, J16 |
| 2 | ADS1014IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2, U5 |
| 2 | Conn_01x01_Pin | Connector_Wire:SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm | J3, J9 |
| 2 | Loop TP | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP5, TP6 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 6.8u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | DAC53401 | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U4 |
| 1 | ISO164xB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | JST4_F | Connector_JST:JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J6 |
| 1 | LOGO | ! Robomaster Special:StampedeLogo | G*** |
| 1 | TLV9301xDBV | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | V_{SC+BUF} | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP3 |
| 1 | V_{SCL} | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP1 |
| 1 | V_{SDA} | TestPoint:TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP2 |
Questions
How big is the DevBoardInterface 1B PCB?
It measures 45.6 × 65.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DevBoardInterface 1B use?
30 parts, built around the ADS1014IDGS and DAC53401DSG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DevBoardInterface 1B KiCad files?
From the ut-ras/rm_electrical-supercap repository on GitHub, at the commit this page was made from: the board is Rev 1B Boards/DevBoardInterface 1B/DevBoardInterface 1B.kicad_pcb and its schematic Rev 1 Boards/Boost Stage1 Rev1/Stage1 Rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DevBoardInterface 1B design in my own project?
Its repository states no licence, so its author keeps all rights: ask ut-ras before reusing the design.
More from ut-ras/rm_electrical-supercap
12- 2 layers109 × 90 mm
- 4 layers97.5 × 69.8 mm
- 4 layers46 × 97 mm
- 4 layers67.2 × 46 mm
- 4 layers46 × 71.2 mm
- 4 layers71.2 × 46 mm
- 2 layers55 × 45.1 mm
- 4 layers111.8 × 57.9 mm
- 2 layers48 × 46.5 mm
- 2 layers40.4 × 57.8 mm
- 2 layers64.2 × 49.3 mm
Similar boards
- 4 layers50 × 50 mm
Probe
Carciax/EEE4022S_Salinity_JCP24-03
This project focused on the design of a salinity sensor for measuring the salinity of the sea water beneath the Antarctica ice caps which had a unique habitat and salinity range due to the ice caps expelling large…
83 parts - 2 layers41.5 × 30.5 mm
THTIC2
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
27 parts93 - 2 layers65 × 30 mm
Raspberry Pi Zero W
chukhanhhoang/SoftRoboticSetupFesto
Code for Raspberry Pi and Matlab/Simulink
72 parts14 - 4 layers55.5 × 65 mm
Jitx design
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
30 parts5.1kGPL-3.0 - 4 layers23 × 53 mm
Easyduino STM32F103
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
30 parts755CERN-OHL-P-2.0 - 4 layers112.1 × 64 mm
- 4 layers15.2 × 19 mm
- 4 layers64.2 × 51.3 mm
