
Temperature
urlenbayev/summer2023
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor…

This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor…
9dof sensor is an open-source printed circuit board by urlenbayev, from the urlenbayev/summer2023 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 47.8 × 47 mm with 24 parts on 55 nets, routed with 179 tracks and 98 vias.
It is built around the BMD-301-A-R, ICM-20948 and TPS76918DBV, with the BSS138, BRX1-2477-SM and TC2030-IDC-NL among its other parts. Its parts include 9 capacitors, 4 resistors, 3 ICs and 2 transistors. It belongs with the sensors and measurement boards of this library.
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in remote and hard-to-reach areas. The device was developed during Aalto University’s Protopaja course with the aim is to digitize and automate the monitoring and analysis of various structures, products, and services. The primary objective was to create an energy-efficient, long-lasting IoT device capable of measuring the structural conditions of the station towers and display the collected, clean data to the user.
Utilizing wireless sensor stations, the device aims to capture real-time data and transmit it to a microprocessor via Bluetooth. Data is then sent to a cloud-based server via a mobile network, where it is processed, stored, and displayed through a user interface. This allows for real-time statistical display, anomaly detection, and predictive maintenance alerts.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C9 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 12p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | BMD-301-A-R | BMD-301-A-R:BMD-301-A-R | U2 |
| 1 | BRX1-2477-SM | CR2477-clip:BAT_BRX1-2477-SM | BT1 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U1 |
| 1 | TC2030-IDC | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | TC1 |
| 1 | TPS76918 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
The 20 most common of 24 parts.

urlenbayev/summer2023
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor…

urlenbayev/summer2023
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor…

urlenbayev/summer2023
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor…


lukasznowarkiewicz/M2SmartHome
Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.



dustin-lehmann/TWIPR
See https://github.com/dustin-lehmann/TWIPR/wiki for descriptions on how to use the hardware and software

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
It measures 47.8 × 47 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the BMD-301-A-R, ICM-20948, TPS76918DBV and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the urlenbayev/summer2023 repository on GitHub, at the commit this page was made from: the board is hardware/9dof_sensor.kicad_pcb and its schematic hardware/9dof_sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).