
Phantom 3 pro gimbal top board
o-gs/dji-hardware-schematics
Community made schematics for the DJI drones and devices.

Game and watch hardware is an open-source printed circuit board by Upcycle-Electronics, from the Upcycle-Electronics/game-and-watch-hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 108.7 × 55.1 mm with 199 parts on 148 nets, routed with 1,326 tracks and 151 vias.
It is built around the MX25U8035FM2I, NAU8315B31VG and BQ24072RGTR, with the PMBT3904 and SSM6J412TU,LF among its other parts. Its parts include 35 resistors, 34 capacitors, 6 connectors, 5 ICs and 4 transistors. It belongs with the wearables boards and the STM32 boards of this library.







| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | JMP-0402-OPEN | Resistor_SMD:R_0402_1005Metric | JP59, JP60, JP61, JP62, JP63, JP64, JP65, JP66, JP68, JP100, JP101, JP103, JP104, JP105, JP106, JP107 +20 |
| 35 | TestPoint | gnw:gnw-TestPoint_Pad_D1.0mm | TP51, TP52, TP53, TP54, TP55, TP56, TP57, TP58, TP59, TP60, TP61, TP62, TP63, TP64, TP65, TP66 +19 |
| 15 | 100n | Capacitor_SMD:C_0201_0603Metric | C1, C2, C4, C5, C7, C8, C11, C12, C13, C15, C17, C19, C20, C25, C30 |
| 10 | JMP-0402-CLOSED | gnw:JMP-0402-CLOSED | JP57, JP67, JP69, JP70, JP72, JP73, JP77, JP82, JP85, JP88 |
| 8 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C14, C16, C18, C22, C24, C27, C33 |
| 8 | MountingHole_Pad | gnw:MountingHole_2.0mm | H51, H52, H54, H55, H57, H58, H59, H60 |
| 6 | jmp-0805 | gnw:JMP-0805-CLOSED | JP51, JP52, JP53, JP83, JP84, JP102 |
| 4 | 100K | Resistor_SMD:R_0201_0603Metric | R11, R12, R15, R16 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric | C21, C23, C26, C28 |
| 4 | JMP-0603-OPEN | Resistor_SMD:R_0603_1608Metric | JP54, JP55, JP58, JP89 |
| 3 | 100k | Resistor_SMD:R_0201_0603Metric | R7, R8, R9 |
| 3 | 10M | Resistor_SMD:R_0201_0603Metric | R1, R2, R4 |
| 3 | 10R | Resistor_SMD:R_0201_0603Metric | R21, R26, R29 |
| 3 | 3K0 | Resistor_SMD:R_0201_0603Metric | R23, R24, R27 |
| 3 | 4K7 | Resistor_SMD:R_0201_0603Metric | R22, R25, R28 |
| 3 | PMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R30, R31 |
| 2 | 10K | Resistor_SMD:R_0201_0603Metric | R3, R35 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C31 |
| 2 | 22K | Resistor_SMD:R_0201_0603Metric | R10, R18 |
| 2 | 22p | Capacitor_SMD:C_0201_0603Metric | C9, C10 |
| 2 | 2K2 | Resistor_SMD:R_0201_0603Metric | R13, R14 |
| 2 | 5K2 | Resistor_SMD:R_0201_0603Metric | R32, R33 |
| 2 | UNKNOWN | Resistor_SMD:R_0201_0603Metric | R5, R6 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 10n | Capacitor_SMD:C_0201_0603Metric | C34 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C32 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 2R2M | gnw:L_0806_2016Metric | L1 |
| 1 | 3K | Resistor_SMD:R_0201_0603Metric | R20 |
| 1 | 75K | Resistor_SMD:R_0201_0603Metric | R19 |
| 1 | 7K5 | Resistor_SMD:R_0201_0603Metric | R17 |
| 1 | ACTION-A | gnw:Button_Carbon-Contact_Round_6.5mm | B6 |
| 1 | ACTION-B | gnw:Button_Carbon-Contact_Round_6.5mm | B5 |
| 1 | BQ24072RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | IC5 |
| 1 | Battery | Connector_Molex:Molex_Pico-EZmate_78171-0002_1x02-1MP_P1.20mm_Vertical | J5 |
| 1 | D-DOWN | gnw:Button_Carbon-Contact_Round_5.00mm | B2 |
| 1 | D-LEFT | gnw:Button_Carbon-Contact_Round_5.00mm | B1 |
| 1 | D-RIGHT | gnw:Button_Carbon-Contact_Round_5.00mm | B3 |
| 1 | D-UP | gnw:Button_Carbon-Contact_Round_5.00mm | B4 |
| 1 | DA9230-61VZ2 | gnw:WLCSP-12_1.28x1.68_Layout3x4_P0.4mm | IC4 |
| 1 | DISPLAY1 | gnw:Molex_502078-3310_2Rows-33Pins-1MP_P0.5mm-int0.25mm_Horizontal | J3 |
| 1 | DISPLAY2 | gnw:Molex_Easy-On_503480-0400_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | H01717 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | JMP-0603-CLOSED | gnw:JMP-0603-CLOSED | JP56 |
| 1 | LD39020DTPU33R | gnw:DFN-4-1EP_1x1_P0.65mm_EP0.56x0.56mm | IC3 |
| 1 | MENU-GAME | gnw:Button_Carbon-Contact_Round_5.00mm | B9 |
| 1 | MENU-SET | gnw:Button_Carbon-Contact_Round_5.00mm | B7 |
| 1 | MENU-TIME | gnw:Button_Carbon-Contact_Round_5.00mm | B8 |
| 1 | MX25U8035FM2 | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | IC2 |
| 1 | MountingHole | gnw:MountingSlot_NC_1.3x2.2mm | H53 |
| 1 | MountingHole | gnw:MountingHole_NC_1.5mm | H56 |
| 1 | NAU8315-B31V | gnw:WLCSP-12_1.18x1.95_Layout3x4_P0.4mm | IC1 |
| 1 | POWER | gnw:SW_PUSH_1P1T_Horizontal_Nintendo_GnW | B10 |
| 1 | SSM6J412TU | gnw:Toshiba_UF6_SOT363F | Q4 |
| 1 | STM32H7B0VGT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | UC1 |
| 1 | SWD PORT | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | USB-C | gnw:USB_C_Receptacle_JAE_DX07BN24JA2 | J6 |
| 1 | speaker | gnw:Speaker | J1 |

o-gs/dji-hardware-schematics
Community made schematics for the DJI drones and devices.

StarGate01/power-extender
Hardware and software for a power and IO extension PCB with current monitoring and I2C interface.





LorandBiro/irrigation-controller
This repository contains the software, hardware design, and documentation of a smart irrigation controller. The system is designed and created for personal use.

vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
It measures 108.7 × 55.1 mm and has 4 copper layers, 1.6 mm thick.
199 parts, built around the MX25U8035FM2I, NAU8315B31VG, BQ24072RGTR and PMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Upcycle-Electronics/game-and-watch-hardware repository on GitHub, at the commit this page was made from: the board is kicad/g&w.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).